V12 anybody

V6 Technical/Performance Discussions
fabius
Junior Member
Posts: 26
Joined: August 5th, 2003, 2:01 am
Location: Cork, Ireland

V12 anybody

Post by fabius »

I know of a company in england who put a second engine into the audi tt, I have a spare engine so I was thinking of doing the same, just looking for some opinion and advice for now coz this is my third project at the moment
Spydie
Regular Member
Posts: 1161
Joined: January 14th, 2003, 2:01 am
Location: Ottawa, Ontario, Canada
Contact:

Re: V12 anybody

Post by Spydie »

not sure I understand your idea.
You want to put 2 V6 engines in an Audi TT or the MX3?
and 2 V6 engines in a MX3?????
http://members.cardomain.com/spydie
"So I said to my one legged wife, I said...'Peg', you're 'cut-off'."
lakersfan1
Senior Member
Posts: 3825
Joined: June 26th, 2003, 2:01 am
Location: Puyallup, WA

Re: V12 anybody

Post by lakersfan1 »

From what I hear, the TT has the second engine in the rear, not inline, so I suppose it's plausible. The question, however, is why??
User avatar
lucky13
Regular Member
Posts: 333
Joined: April 7th, 2003, 2:01 am
Location: El Paso, TX

Re: V12 anybody

Post by lucky13 »

Would the wieght to the second engine be a factor.
I think it would coast too much.
User avatar
mx3TT
Supporting Member
Posts: 1144
Joined: June 22nd, 2003, 2:01 am
Location: NY
Contact:

Re: V12 anybody

Post by mx3TT »

I saw it done once in a Hyundai. One in the front and one in the trunk. It was an interesting idea but I dont think I would go through all that trouble since you can just use that money to put stuff on your engine already.
Chris

Image
MY MX-3 PICTURES
MX-3.com's online store - SUPPORT MX-3.COM
TsiMiata
Regular Member
Posts: 1074
Joined: July 30th, 2003, 2:01 am
Location: Cape Cod, MA
Contact:

Re: V12 anybody

Post by TsiMiata »

2 KLZE's would net about 400hp. Handling will suck- but straight line would be crazy.<p>If you think you can do it- DO IT.<p>Just some things to think about- You'll have to relocate the gas tank, Figure out how to drove the rear wheels, build motor mounts and subframes out back, and a million other things. Is it impossible- no. Is it extremely difficult- yes.
93 MX-3 GS- ZE, KL31 ECU, Fidanza Flywheel, CM Stage 2-R clutch, Hotshot Headers

99 Subaru Impreza RS, the new toy

91 Eagle Talon Tsi AWD *RIP*
JasonH
Regular Member
Posts: 389
Joined: March 16th, 2003, 2:01 am
Location: Newark, DE, USA
Contact:

Re: V12 anybody

Post by JasonH »

Car & Driver did the same thing to a CRX decades ago. The most difficult thing was to tune both engines to respond to throttle the same way. Mismatched front and rear wheel speeds on acceleration is probably a strange and not fun sensation.<p>What any of this has to do with a V12, I don't know.
User avatar
Custommx3
Site Administrator
Posts: 8391
Joined: November 7th, 2000, 2:01 am
antispam: ~SPAM*SUX~
Location: Lat 35.1N Lon -90W
Contact:

Re: V12 anybody

Post by Custommx3 »

Good luck with the tranny situation...
Sonicxtacy02
Senior Member
Posts: 2053
Joined: January 1st, 2001, 2:01 am
Location: Woodbridge, VA, USA
Contact:

Re: V12 anybody

Post by Sonicxtacy02 »

<blockquote><font size="1" face="Verdana, Arial">quote:</font><hr>Originally posted by JasonH:
Car & Driver did the same thing to a CRX decades ago. The most difficult thing was to tune both engines to respond to throttle the same way. Mismatched front and rear wheel speeds on acceleration is probably a strange and not fun sensation.<p>What any of this has to do with a V12, I don't know.<hr></blockquote><p>
v6+v6=v12.... LMAO
Shaun Newman
SOLD 1994 Blaze Red GS/ SOLD 1994 Chaste White GS-R
endocyc
Regular Member
Posts: 511
Joined: June 9th, 2001, 2:01 am
Location: Mississauga

Re: V12 anybody

Post by endocyc »

Theres this place in Toronto (Evolution, Dufferin& Dupont) That did this very project only the did a Golf GTI with double VR6 engines and standard transmissions. Looks sick and the dude says it all works just fine (something tells me he was lying) But I believed him when he said it WASNT WORT THE WORK. Any one living in the GTA should stop in and check it out..
fabius
Junior Member
Posts: 26
Joined: August 5th, 2003, 2:01 am
Location: Cork, Ireland

Re: V12 anybody

Post by fabius »

the reason is I can't get reasonable insurance on the car at the moment so it's just sitting there, and I can't sell it coz few people can insure it so I decided I wanted to do something insane but doable coz I really DONT WANT TO SELL IT. it's just too good to leave go
fabius
Junior Member
Posts: 26
Joined: August 5th, 2003, 2:01 am
Location: Cork, Ireland

Re: V12 anybody

Post by fabius »

any idea what sort of 0 - 60 times she should put in? I've already toasted my friends GT4 and my engines bog standard
lakersfan1
Senior Member
Posts: 3825
Joined: June 26th, 2003, 2:01 am
Location: Puyallup, WA

Re: V12 anybody

Post by lakersfan1 »

I saw the dual engine TT on TV today. Each 1.8T engine was boosted to 425 HP!!!! So the car had over 800 HP total!!! IT looked fast as snot, too.
Spida
Junior Member
Posts: 24
Joined: July 8th, 2001, 2:01 am
Location: Canada

Re: V12 anybody

Post by Spida »

I have seen duel engine cars before including a dule engine caddie with 2 northstar engines. My thought is it will jsut cost so much. Besides fule tank relocation (easly get a fuel cell) you would have to make a fire wall for the rear engine and find a way to cool it. The tranies would be some what hard to make sure they stay in the same gear unless they are manual or you shift two auto tranies with one shifter. Then you have to tune both engine to resond the same. Then you have to rig a new exhaust,set up rear wheel drive axels, rig throttel cables, and a million other lill things.
If the hp is truly aditive and you get 400 hp you shoudl run the quarter mile in about 11.5 secs acording to a 1/4 mile calculator
fabius
Junior Member
Posts: 26
Joined: August 5th, 2003, 2:01 am
Location: Cork, Ireland

Re: V12 anybody

Post by fabius »

I've two very handy friends to help out one mechanical enginerr anda metal fabricator plus a few local engineering shops and car shops are interested too, and there both manual trannys by the way. Think I'll need custom shocks too for the back but there easily available here on mail order.
Post Reply

Return to “V6 Technical/Performance”