MX-3.com

Also, next to the ECU, verify the relay is there for your fuel pump.

Checked that, turns out the fuel lines were hooked up backwards and that the timing was so far off the ecu was telling the pump not to start. So now I have fuel, the pump starts and can smell gas and everything, still missing ...

No Spark during spark test. Plug removed, car turned over , no spark to ground.. Fuel. No sound from fuel pump and no pressure, I am suspect that sensor info is telling the ecu to cut fuel and spark. All sensors have proper plugs, ground and vacum attachments. I have gone over the entire sytem so ...

Hey

Ok, I have the milenia KLZE(curved neck) installed and I have all the plugs in except the knock sensor and the secondary sensor. The only other mod under the hood is that i replaced the stock airbox with a open cone filter. At the moment we are trying to turn it over and I am not getting any ...

OK, on passenger side there aRE a few problems in my KLZE swap at the moment, I have a vacuum hose i cant connect, the one that connects on the side of the intake manifold and goes to tha booster looking thing. I also have a temperature sensor which has no plug into the coolant area nor can i fit ...

I would love to post a pic but i am computer illiterate and dont know how to do so on this forum, sorry.

Hey

Im in the middle of doing my klze swap and have so far found a wire i have no idea what to do with, the one from my k8 comes out between the two valve covers and right from under the intake manifold and the sensor has two wires. The one from my KLZE has only one wire and the plugs are different ...

Hey

I am about to get my flywheel resurfaced, will the klze automatic flywheel work for my k8 manual transmission?

Thanks

I have a spare auto tranny sitting around in about 2-3 weeks off of a KLZE if any one is interested in making me an offer.

Thanks guys

Ive spent some tiem searching this site and coulnt find an answer to my question. I am about to do a ZE swap but want to replace my belts, should I replace them with e 1,8 mx-3 belts or go with the mx-6 belts?

IM definitly interested, i hate the stock headlights

HEy everyone

I tried searching for recommendations in previous posts but i was not gettig anywhere fast. I am planning on ordering a KLZE within the next two weeks and im located in the central interior of British Columbia. I am trying to order the motor from somewhere in Canada preferably, i have ...

Hey Everyone

I am new on this site, I drive a black 93 mx-3 GS with a full fx designs VSX body kit, I am currently planning on swapping in a KLZE into my car. I was wondering since it seems like there are a lot of people on this site who have done this swap so far where I should purchase my motor ...