Its laguna blue mixed with orange and white shades,,,, just imagine,,,
Indiglo gauges pix
- 
				kuruption1983
 - Senior Member
 - Posts: 2030
 - Joined: February 3rd, 2002, 2:01 am
 - Location: Toronto, Ontario, Canada
 - Contact:
 
Indiglo gauges pix
In case anyone was wondering how the gauges from ebay would look in your car, here are some pix to give you an idea of how sick they look. first off they look alot betta than any speedhut or anytin else i have senn, and they are alot brighter,,,,<p>see for yourself,,,  
  <p>:D  
Its laguna blue mixed with orange and white shades,,,, just imagine,,,
    :p
			
			
									
						
							Its laguna blue mixed with orange and white shades,,,, just imagine,,,

- Wildman640
 - Regular Member
 - Posts: 550
 - Joined: January 15th, 2002, 2:01 am
 - Location: Sumerco, West Virginia
 
Re: Indiglo gauges pix
that looks sick bro
			
			
									
						
										
						- Custommx3
 - Site Administrator
 - Posts: 8391
 - Joined: November 7th, 2000, 2:01 am
 - antispam: ~SPAM*SUX~
 - Location: Lat 35.1N Lon -90W
 - Contact:
 
Re: Indiglo gauges pix
yea, I have the same ones in my GS. They are really nice.
			
			
									
						
										
						Re: Indiglo gauges pix
Wow, those are bright, I like how the red actually glows red too, might have to look in on getting some of those ones.
			
			
									
						
							-Mark Lathrop
1992 MX-3 RS-T
B6T with some goodies
 
"...I told those fudgepackers I liked Michael Bolton's music..."
			
						1992 MX-3 RS-T
B6T with some goodies
"...I told those fudgepackers I liked Michael Bolton's music..."
- 
				Sonicxtacy02
 - Senior Member
 - Posts: 2053
 - Joined: January 1st, 2001, 2:01 am
 - Location: Woodbridge, VA, USA
 - Contact:
 
Re: Indiglo gauges pix
is that a stock radio?  I forgot what they look like
			
			
									
						
							Shaun Newman
SOLD 1994 Blaze Red GS/ SOLD 1994 Chaste White GS-R
			
						SOLD 1994 Blaze Red GS/ SOLD 1994 Chaste White GS-R
- 
				thebonestockkid
 - Regular Member
 - Posts: 498
 - Joined: April 3rd, 2002, 2:01 am
 - Location: Bolton, Ontario, Canada
 
Re: Indiglo gauges pix
Damn bro, those look amazing... I was thinking about getting those too.. wasnt sure how they looked, but damn, lol. (group buy anyone? heh) Were they easy to install?? or did you get someone else to do it... looks really good man, lates.
			
			
									
						
							
'97 Grenada black pearl Acura EL, JDM B18C 98spec ITR Swap. Power in Control full coilovers going in next spring. Not to mention a most unusual whining noise... coming soon.'92 Intense blue pearl Jeep YJ, OME lift, mudders, fun.
R.I.P.
'93 Clear white GS-DE ~14.648@92.98mph, 2.234 60ft. PARTING OUT PM ME.
- 
				canadian_ice
 - Regular Member
 - Posts: 808
 - Joined: September 13th, 2001, 2:01 am
 - Location: Ottawa, ON, Canada
 - Contact:
 
Re: Indiglo gauges pix
DAMN! Those look awesome. Would go perfectly in my car.
			
			
									
						
										
						- 
				Runninit
 - Regular Member
 - Posts: 153
 - Joined: July 15th, 2002, 2:01 am
 - Location: Richmond Hill
 - Contact:
 
Re: Indiglo gauges pix
Can you still get those on ebay - and kuruption how much did you pay for them? I want those so badly right now i hate the way mine look.... Let me know thanx see ya or talk to me on msn. I just want to get them asap and order them ahah ... They easy to install?
Thanx
			
			
									
						
							Thanx
Mx-3 all the way baby! It aint a girls car thats all i have to say...
			
						- 
				Guest
 
Re: Indiglo gauges pix
whats the name of the company that makes them?? and how much would those be?
			
			
									
						
										
						- 
				Tyler17rose
 - Regular Member
 - Posts: 846
 - Joined: October 19th, 2002, 2:01 am
 - Location: Ottawa, Ontario, Canada
 - Contact:
 
Re: Indiglo gauges pix
wheres the gas and temp needles? and i blind or are they not there?
			
			
									
						
							Mods:
- ZE, Mike seli 214 intake cams, Ported n polished heads, Interprep valve springs, DE retainers, rebuilt bottom end, toga main and rod bearings, toga hv oil pump, CZT 67mm tb, mbx udp, ported intake mani, SS headers, 2.5inch full exhaust, racingbeat muffler, highflow cat, megasquirt v2.
new toy, 86 TII rx7, JDM S5 motor/turbo, + alot of other goodies
			
						- ZE, Mike seli 214 intake cams, Ported n polished heads, Interprep valve springs, DE retainers, rebuilt bottom end, toga main and rod bearings, toga hv oil pump, CZT 67mm tb, mbx udp, ported intake mani, SS headers, 2.5inch full exhaust, racingbeat muffler, highflow cat, megasquirt v2.
new toy, 86 TII rx7, JDM S5 motor/turbo, + alot of other goodies
- 
				novadoc
 - Regular Member
 - Posts: 311
 - Joined: August 23rd, 2002, 2:01 am
 - Location: Kitchener, Ontario Canada
 - Contact:
 
Re: Indiglo gauges pix
damn bro.. i think your blind<p>left of the speedometer   
  <p>i want these guages
where can i get them cuz there arent any on ebay
			
			
									
						
							where can i get them cuz there arent any on ebay
NoVa<p>
			
						
- 
				MX-3 for Me
 - Regular Member
 - Posts: 153
 - Joined: May 6th, 2002, 2:01 am
 - Location: Etobicoke, Ontario
 - Contact:
 
Re: Indiglo gauges pix
ohh, I want those even more now!! Kaveh, hook a sister up! haha, If there is a group buy, im definatly in!  Those look amazing, and would look even better in my car...hehe  
			
			
									
						
										
						- 
				zytariuk
 - Regular Member
 - Posts: 947
 - Joined: January 19th, 2002, 2:01 am
 - Location: Barrie, Ontario, Canada
 - Contact:
 
Re: Indiglo gauges pix
kuruption, where do you get those? They are ****in sick!!
			
			
									
						
							<img src="http://members.rogers.com/zytariuk/images/mx-3.gif" alt=" - " />
 
1992 Mazda Mx-3 GS - Beige metallic
zytariuk's mx-3 page (updated June 12th, 2003)
			
						1992 Mazda Mx-3 GS - Beige metallic
zytariuk's mx-3 page (updated June 12th, 2003)
- 
				kuruption1983
 - Senior Member
 - Posts: 2030
 - Joined: February 3rd, 2002, 2:01 am
 - Location: Toronto, Ontario, Canada
 - Contact:
 
Re: Indiglo gauges pix
WOOOOO, who shall i answer first,,,<p>It was 38 bucks which includes shipping to T.O. Canada, coming with the package were the gauges and a bunch of wires.
Very easy to install as long as you have opened gauges before,,
   took me 20 mins to install em, and i made a hole to fir the brightness control right under the power mirror control,,,,
by the way, the car is off, but the RPM stands @ 1, because of the friction between the face and the needle, but thats no problem, otherwise is works perfectly when its more than 1 RPM, just doesnt go down to 0 ,,!!
    
  
I would recommend this mod to everyone, its the best thing you can do for your interior besides painting your dash trims,,,
Really gives a kewl look to your interior,,,
any other questionz, feel free to ask,,, :p
			
			
									
						
							Very easy to install as long as you have opened gauges before,,
by the way, the car is off, but the RPM stands @ 1, because of the friction between the face and the needle, but thats no problem, otherwise is works perfectly when its more than 1 RPM, just doesnt go down to 0 ,,!!
I would recommend this mod to everyone, its the best thing you can do for your interior besides painting your dash trims,,,
Really gives a kewl look to your interior,,,
any other questionz, feel free to ask,,, :p

- 
				fictionaldaydream
 - Regular Member
 - Posts: 805
 - Joined: April 19th, 2002, 2:01 am
 - Location: OKC, Oklahoma
 
Re: Indiglo gauges pix
Those are the exact ones I have. I hate the green color though. I love it better the the ones that just has the indiglo blue and green. I mean these are the euro reverse ones. I'm still having problems with mine, its with the rpm it sticks at 4. A shop is fixing it for me. They even had to cut some of it on the clear parts.