i need help mx-3 gurus!!

V6 Technical/Performance Discussions
Post Reply
rodney5756
Junior Member
Posts: 14
Joined: September 20th, 2007, 5:35 pm

i need help mx-3 gurus!!

Post by rodney5756 »

alright...this morning it was kind if cold ( 40ish) i started my car and put it in reverse, and it started running really bad. low, rough idle. Can smell gas when running...
i checked plugs, all are fine but 1 (can smell gas on the one), all plug wires are fine, i checked fluids, oil was almost empty so i filled it, and coolant was also(filled it too) im really hoping this isnt a timing issue....is there any way i can check the timing on this sucka?

93 mx-3 1.8 gs...only mods are cai, exhaust, and hei mod w/o external coil

HELP!

PS it has been overheatikng the past cpl weeks.. figurd it was thermostat....i wish i woulda checked the fluids before today...i hope my car's not dying!!!

:cry: :cry: :cry:
User avatar
se7en
Regular Member
Posts: 1264
Joined: August 29th, 2007, 1:47 am
Location: Canada(brrrr, it's cold)
Contact:

Re: i need help mx-3 gurus!!

Post by se7en »

ya, dude, you should have checked those fluids lol :)

I hope that by adding oil and coolant, you fixed your problems.

keep us posted.

7
1992 mx-3 GS-T, 10-12psi, T3/t4 hybrid, Turbosmart WG, AFPR, SSAC TURBO pipes, MSD Blaster coil, K&N, AEM W/B, MSnS(full standalone), 225Whp street tuned(10psi), 245Whp (12psi)(300bhp!!!)
1992 Fairlady Z(JDM RHD) 2+2 TT black(done!)700whp+
My Feedback
Don't Click Here! Trust me,Time waster!
User avatar
tehbrookzorz
Regular Member
Posts: 1561
Joined: April 29th, 2006, 6:59 pm
Location: Calgary, Alberta

Re: i need help mx-3 gurus!!

Post by tehbrookzorz »

Make sure you bleed all the air out of the cooling system.

The plug that smelled like gas; did it have good spark? Maybe you have a bad high tension lead or connection.
Cody
Image
rodney5756
Junior Member
Posts: 14
Joined: September 20th, 2007, 5:35 pm

Re: i need help mx-3 gurus!!

Post by rodney5756 »

alright...

upDATE!

i was just out there...and i was showing mi padre ( my dad) what was the haps with the plug. i pulled the wire out, and it basically fell apart in my hand lol....soo...we jimmy rigged the bi*** back together with elec tape and viola! she runs!

at least that was already on my "to do" list, a tune-up.

Thanks everyone!

PS i burped the cooling system...shes running like a champ now! :wink:
User avatar
ElectricEnergy
Regular Member
Posts: 489
Joined: August 15th, 2006, 12:37 am
Location: Saskatoon SK, Canada

Re: i need help mx-3 gurus!!

Post by ElectricEnergy »

Haha, I have had an electrical taped plug wire for the last 8 or 9 months and its runs beautifully too! Those things are expensive ;).
Image
KL-ZE Swap - OBX SS Headers - 2.5" Exhaust - Falken Azenis Tires - H&R Springs - ZX-2 Struts - CAI - Front & Rear Tower Bar - AWR Motor Mounts - 100hp wet shot (yet to be tested)
Post Reply

Return to “V6 Technical/Performance”