head gasket and bent frame.. Screwed?
-
- Regular Member
- Posts: 44
- Joined: June 26th, 2006, 2:55 pm
- Location: ontario
head gasket and bent frame.. Screwed?
Ok, so I purchased this car, get it checked and then I find out the head gasket is blown and the frame is bent among other things.. But these seem to be the main issues. I hear head gaskets are expensive to repair and a cracked frame renders the car unsuitable to certification? Any ideas what the heck I can do? Should I attempt to fix the head gasket and try my best to get the frame good as possible, or try to sell the car to somebody. I spent 1 thousand on this car and I'm hoping I can get at least some of my money back if possible. As a last resort... I can always sell her off for parts and make some cash back. Ideas? Fix or sell? Any help would be GREATLTY appreciated!
-
- Senior Member
- Posts: 6451
- Joined: June 19th, 2004, 2:01 am
- Location: El Paso Tx U.S
- Contact:
where exactly is the frame bent at? if u didnt get it for much you can part it 

-hec
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
-
- Regular Member
- Posts: 44
- Joined: June 26th, 2006, 2:55 pm
- Location: ontario
-
- Regular Member
- Posts: 44
- Joined: June 26th, 2006, 2:55 pm
- Location: ontario
-
- Senior Member
- Posts: 6451
- Joined: June 19th, 2004, 2:01 am
- Location: El Paso Tx U.S
- Contact:
If the roof frame is damaged it should be fixable.. its the kmiddle frame you dont want to bent.. even the front frame is fixable but expensive. Any pics? If u part it .. post it here. Alot of us are looking for spare parts.
-hec
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
-
- Regular Member
- Posts: 44
- Joined: June 26th, 2006, 2:55 pm
- Location: ontario
-
- Regular Member
- Posts: 44
- Joined: June 26th, 2006, 2:55 pm
- Location: ontario
-
- Senior Member
- Posts: 2220
- Joined: October 17th, 2004, 2:01 am
- Location: SLC, Utah
Is it a manual?
How much mileage?
If you choose to part it out you can actually make some bank cause you will find people like me that are in need of swap parts you know...
How much mileage?
If you choose to part it out you can actually make some bank cause you will find people like me that are in need of swap parts you know...

2008 Mazda 3
1993 MX3 GS
KLZE, Fidanza flywheel, KL31 CAMs, South Bend Stage I Clutch, Pacesetter STS, SS AutoChromes, Magnaflow muffler, 2.25' Exhaust, CAI, Blaster Coil HEI, KLDE Valvetrain, 5 Speed Swap
1993 MX3 GS
KLZE, Fidanza flywheel, KL31 CAMs, South Bend Stage I Clutch, Pacesetter STS, SS AutoChromes, Magnaflow muffler, 2.25' Exhaust, CAI, Blaster Coil HEI, KLDE Valvetrain, 5 Speed Swap
-
- Regular Member
- Posts: 44
- Joined: June 26th, 2006, 2:55 pm
- Location: ontario
-
- Senior Member
- Posts: 2220
- Joined: October 17th, 2004, 2:01 am
- Location: SLC, Utah
I will bid on the front lip!
All I need is some of the swap parts from your MX3 except for the tranny
All I need is some of the swap parts from your MX3 except for the tranny
2008 Mazda 3
1993 MX3 GS
KLZE, Fidanza flywheel, KL31 CAMs, South Bend Stage I Clutch, Pacesetter STS, SS AutoChromes, Magnaflow muffler, 2.25' Exhaust, CAI, Blaster Coil HEI, KLDE Valvetrain, 5 Speed Swap
1993 MX3 GS
KLZE, Fidanza flywheel, KL31 CAMs, South Bend Stage I Clutch, Pacesetter STS, SS AutoChromes, Magnaflow muffler, 2.25' Exhaust, CAI, Blaster Coil HEI, KLDE Valvetrain, 5 Speed Swap