head gasket and bent frame.. Screwed?

V6 Technical/Performance Discussions
MeNtAlPaTiEnT
Regular Member
Posts: 44
Joined: June 26th, 2006, 2:55 pm
Location: ontario

head gasket and bent frame.. Screwed?

Post by MeNtAlPaTiEnT »

Ok, so I purchased this car, get it checked and then I find out the head gasket is blown and the frame is bent among other things.. But these seem to be the main issues. I hear head gaskets are expensive to repair and a cracked frame renders the car unsuitable to certification? Any ideas what the heck I can do? Should I attempt to fix the head gasket and try my best to get the frame good as possible, or try to sell the car to somebody. I spent 1 thousand on this car and I'm hoping I can get at least some of my money back if possible. As a last resort... I can always sell her off for parts and make some cash back. Ideas? Fix or sell? Any help would be GREATLTY appreciated!
hgallegos915
Senior Member
Posts: 6451
Joined: June 19th, 2004, 2:01 am
Location: El Paso Tx U.S
Contact:

Post by hgallegos915 »

where exactly is the frame bent at? if u didnt get it for much you can part it :)
-hec

MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
MeNtAlPaTiEnT
Regular Member
Posts: 44
Joined: June 26th, 2006, 2:55 pm
Location: ontario

Post by MeNtAlPaTiEnT »

They said it was bent near the roof or the front.. either one. I got it for a thousand bucks from that #*&@# .. Does parting out a car usually make a decent amount of cash? Never done before..
User avatar
fieromx3
Supporting Member
Posts: 2743
Joined: June 27th, 2005, 7:58 pm
Location: Guelph, ontario
Contact:

Post by fieromx3 »

u can easily make over a grand in time from parting a car out... i made a cupple hundred bux parting mine out in just like a week..i coulda made more but i didnt have the time to take any more stuff off..
93' MX-3 GS-ZE
14.4 @ 96.7
14.5 @ 97.2
MeNtAlPaTiEnT
Regular Member
Posts: 44
Joined: June 26th, 2006, 2:55 pm
Location: ontario

Post by MeNtAlPaTiEnT »

Do you put ur stuff in the local shopping paper or what?
User avatar
fieromx3
Supporting Member
Posts: 2743
Joined: June 27th, 2005, 7:58 pm
Location: Guelph, ontario
Contact:

Post by fieromx3 »

all i did was post it on these forums that im parting it out and thats where i made my money... post it on here in ur local paper autotrader anywhere!
93' MX-3 GS-ZE
14.4 @ 96.7
14.5 @ 97.2
hgallegos915
Senior Member
Posts: 6451
Joined: June 19th, 2004, 2:01 am
Location: El Paso Tx U.S
Contact:

Post by hgallegos915 »

If the roof frame is damaged it should be fixable.. its the kmiddle frame you dont want to bent.. even the front frame is fixable but expensive. Any pics? If u part it .. post it here. Alot of us are looking for spare parts.
-hec

MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
MeNtAlPaTiEnT
Regular Member
Posts: 44
Joined: June 26th, 2006, 2:55 pm
Location: ontario

Post by MeNtAlPaTiEnT »

Ok thanks guys. Ill see what happens.
User avatar
mxmaz
Regular Member
Posts: 1116
Joined: May 4th, 2004, 2:01 am
Location: Canada

Post by mxmaz »

Take it to a body shop to see if the frame is worth straightening. As for the head gasket, thats a good reason for a ze swap.
MeNtAlPaTiEnT
Regular Member
Posts: 44
Joined: June 26th, 2006, 2:55 pm
Location: ontario

Post by MeNtAlPaTiEnT »

Yes, good point. Something I'm going to have to concider. I still have 3 grand left over, so I have two choices. Repair using money or buy another car using the money. But I don't know which option would be worth doing at the moment
Juans_93_MX3
Senior Member
Posts: 2220
Joined: October 17th, 2004, 2:01 am
Location: SLC, Utah

Post by Juans_93_MX3 »

Is it a manual?
How much mileage?
If you choose to part it out you can actually make some bank cause you will find people like me that are in need of swap parts you know... :)
2008 Mazda 3
1993 MX3 GS
KLZE, Fidanza flywheel, KL31 CAMs, South Bend Stage I Clutch, Pacesetter STS, SS AutoChromes, Magnaflow muffler, 2.25' Exhaust, CAI, Blaster Coil HEI, KLDE Valvetrain, 5 Speed Swap
MeNtAlPaTiEnT
Regular Member
Posts: 44
Joined: June 26th, 2006, 2:55 pm
Location: ontario

Post by MeNtAlPaTiEnT »

Yes it is a manual, v6, somewhere around 242k miles on it. I will sell the parts if all else fails i.e. nobody calls for the entire car for about a week or so. Hope you're still looking if nobody calls.
User avatar
Steve_SK
Regular Member
Posts: 503
Joined: October 5th, 2006, 3:56 pm
Location: Slovakia
Contact:

Post by Steve_SK »

If you decide to part it out, I need both headlights and front lip. :wink:
MX-3 V6 1993 | Black | EU-spec | K819
Juans_93_MX3
Senior Member
Posts: 2220
Joined: October 17th, 2004, 2:01 am
Location: SLC, Utah

Post by Juans_93_MX3 »

I will bid on the front lip!

All I need is some of the swap parts from your MX3 except for the tranny
2008 Mazda 3
1993 MX3 GS
KLZE, Fidanza flywheel, KL31 CAMs, South Bend Stage I Clutch, Pacesetter STS, SS AutoChromes, Magnaflow muffler, 2.25' Exhaust, CAI, Blaster Coil HEI, KLDE Valvetrain, 5 Speed Swap
User avatar
Steve_SK
Regular Member
Posts: 503
Joined: October 5th, 2006, 3:56 pm
Location: Slovakia
Contact:

Post by Steve_SK »

Juans_93_MX3 wrote:I will bid on the front lip!
No no, this is 'buy it now' auction and the winning bidder is - me. :lol:
MX-3 V6 1993 | Black | EU-spec | K819
Post Reply

Return to “V6 Technical/Performance”