
So Sad... I Could cry!!
- PWRD_BY_HKS
- Regular Member
- Posts: 696
- Joined: August 11th, 2004, 2:01 am
- Location: El Paso
So Sad... I Could cry!!
okay i took my two ladies to the track today ....my wife and victoria... my car....anyway i had two runs but i dont know how to feel ... my first run was vs a modded very well tunned talon tsi boosting 10 psi ..... i took him by maybe half a car...WTF.... then i raced a modded 2002 trans am and he beat me by a car
... maybe not even that.... after all this work i've put in, (1) is this what i should expect or should i be expecting more.... i finally got good launch on drag radials at about 4k rpms so im good on that now...(2) but seriously is this a bad thing???? (3) if i get headers (i know i know i SHOULD already have them) would i catch that TA???

jdmx-3 KID OF THE 
VICTORIA RACING
ZE PERFORMANCE IN 915 TX
Kl01-ZE,Kl31 ecu, millenia manifold, ngk plugs, ngk wires, probe tranny/ and clutch (stock), VortecH FMU 12:1, Aeromotive AFPR, Tial .38mm Wastegate w/ 4lbs spring, Walboro 255 pump, AiResearch T4, 3" down pipe, GODSPEED manifold, Spearco Boost Gauges, BF Goodrich G-force drag radials.
14.8 1/4 mile all motor untimed on boost.

VICTORIA RACING
ZE PERFORMANCE IN 915 TX
Kl01-ZE,Kl31 ecu, millenia manifold, ngk plugs, ngk wires, probe tranny/ and clutch (stock), VortecH FMU 12:1, Aeromotive AFPR, Tial .38mm Wastegate w/ 4lbs spring, Walboro 255 pump, AiResearch T4, 3" down pipe, GODSPEED manifold, Spearco Boost Gauges, BF Goodrich G-force drag radials.
14.8 1/4 mile all motor untimed on boost.
- hppwdn
- Regular Member
- Posts: 925
- Joined: May 27th, 2005, 10:50 pm
- Location: West Palm Beach, FL
- Contact:
What was your 1/4 time? That's the real question.
92 MX3 Turbo ($100 junkyard KLG4) 11.904 @ 124.3mph, 14psi, DOT approved Hoosier drags, pump gas.
NSCRA 2009 FWD Drag Radial Finalist
HIN/NOPI Supershow Class Winner - Miami 2010 - Street-Sport Compact-Mazda
Links: Pretty Pic, GoFast Pic, Timeslip, Track Video
As of July 2011 the MX3 has been retired and sold.
NSCRA 2009 FWD Drag Radial Finalist
HIN/NOPI Supershow Class Winner - Miami 2010 - Street-Sport Compact-Mazda
Links: Pretty Pic, GoFast Pic, Timeslip, Track Video
As of July 2011 the MX3 has been retired and sold.
- PATDIESEL
- Senior Member
- Posts: 4476
- Joined: August 13th, 2001, 2:01 am
- antispam: ~SPAM*SUX~
- Location: Atlanta, GA.
I'd be happy with those results. Did you feel that the race with the TA was run pretty well and he just beat your car and not your driving?

ZE -strait neck,headers,2.5 exhaust,pheno spacers,lower cross member,GC coils,MS struts,Brembo slotted rotors,filled MS mounts,SS brake/clutch lines, CAI,to rear bat reloc,Hella headlamps,Hella DE fogs 180WHP
- PWRD_BY_HKS
- Regular Member
- Posts: 696
- Joined: August 11th, 2004, 2:01 am
- Location: El Paso
well i can shift pretty well in my opinion as a matter a fact a got it on tape if i can figure out how to post it i will ....i think his car just out powered mine...how much horse power do those come with .......the times werent up so i dont know he said he ran a 15 flat though....so that might give you an idea
jdmx-3 KID OF THE 
VICTORIA RACING
ZE PERFORMANCE IN 915 TX
Kl01-ZE,Kl31 ecu, millenia manifold, ngk plugs, ngk wires, probe tranny/ and clutch (stock), VortecH FMU 12:1, Aeromotive AFPR, Tial .38mm Wastegate w/ 4lbs spring, Walboro 255 pump, AiResearch T4, 3" down pipe, GODSPEED manifold, Spearco Boost Gauges, BF Goodrich G-force drag radials.
14.8 1/4 mile all motor untimed on boost.

VICTORIA RACING
ZE PERFORMANCE IN 915 TX
Kl01-ZE,Kl31 ecu, millenia manifold, ngk plugs, ngk wires, probe tranny/ and clutch (stock), VortecH FMU 12:1, Aeromotive AFPR, Tial .38mm Wastegate w/ 4lbs spring, Walboro 255 pump, AiResearch T4, 3" down pipe, GODSPEED manifold, Spearco Boost Gauges, BF Goodrich G-force drag radials.
14.8 1/4 mile all motor untimed on boost.
- PWRD_BY_HKS
- Regular Member
- Posts: 696
- Joined: August 11th, 2004, 2:01 am
- Location: El Paso
come on 74 views .....3 comments.... opinions are all welcome!!!
jdmx-3 KID OF THE 
VICTORIA RACING
ZE PERFORMANCE IN 915 TX
Kl01-ZE,Kl31 ecu, millenia manifold, ngk plugs, ngk wires, probe tranny/ and clutch (stock), VortecH FMU 12:1, Aeromotive AFPR, Tial .38mm Wastegate w/ 4lbs spring, Walboro 255 pump, AiResearch T4, 3" down pipe, GODSPEED manifold, Spearco Boost Gauges, BF Goodrich G-force drag radials.
14.8 1/4 mile all motor untimed on boost.

VICTORIA RACING
ZE PERFORMANCE IN 915 TX
Kl01-ZE,Kl31 ecu, millenia manifold, ngk plugs, ngk wires, probe tranny/ and clutch (stock), VortecH FMU 12:1, Aeromotive AFPR, Tial .38mm Wastegate w/ 4lbs spring, Walboro 255 pump, AiResearch T4, 3" down pipe, GODSPEED manifold, Spearco Boost Gauges, BF Goodrich G-force drag radials.
14.8 1/4 mile all motor untimed on boost.
- PWRD_BY_HKS
- Regular Member
- Posts: 696
- Joined: August 11th, 2004, 2:01 am
- Location: El Paso
it was at a local race track ...Desert Demonz.... i ran 15.7 on street tires (17" kuhmo ecstas) but i just got some drag radials G FOrce and used them on the stock mx-3 rims so im not sure what my times are now .......i used to slip alot so im expecting a 15 flat around there
jdmx-3 KID OF THE 
VICTORIA RACING
ZE PERFORMANCE IN 915 TX
Kl01-ZE,Kl31 ecu, millenia manifold, ngk plugs, ngk wires, probe tranny/ and clutch (stock), VortecH FMU 12:1, Aeromotive AFPR, Tial .38mm Wastegate w/ 4lbs spring, Walboro 255 pump, AiResearch T4, 3" down pipe, GODSPEED manifold, Spearco Boost Gauges, BF Goodrich G-force drag radials.
14.8 1/4 mile all motor untimed on boost.

VICTORIA RACING
ZE PERFORMANCE IN 915 TX
Kl01-ZE,Kl31 ecu, millenia manifold, ngk plugs, ngk wires, probe tranny/ and clutch (stock), VortecH FMU 12:1, Aeromotive AFPR, Tial .38mm Wastegate w/ 4lbs spring, Walboro 255 pump, AiResearch T4, 3" down pipe, GODSPEED manifold, Spearco Boost Gauges, BF Goodrich G-force drag radials.
14.8 1/4 mile all motor untimed on boost.
-
- Senior Member
- Posts: 6451
- Joined: June 19th, 2004, 2:01 am
- Location: El Paso Tx U.S
- Contact:
Dude..desert demon's times are fudged... go to the one on montana..its more expensive but more accurate.
-hec
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
- PWRD_BY_HKS
- Regular Member
- Posts: 696
- Joined: August 11th, 2004, 2:01 am
- Location: El Paso
i know they are off but our official track got shut down (THUNDER ALLEY)
jdmx-3 KID OF THE 
VICTORIA RACING
ZE PERFORMANCE IN 915 TX
Kl01-ZE,Kl31 ecu, millenia manifold, ngk plugs, ngk wires, probe tranny/ and clutch (stock), VortecH FMU 12:1, Aeromotive AFPR, Tial .38mm Wastegate w/ 4lbs spring, Walboro 255 pump, AiResearch T4, 3" down pipe, GODSPEED manifold, Spearco Boost Gauges, BF Goodrich G-force drag radials.
14.8 1/4 mile all motor untimed on boost.

VICTORIA RACING
ZE PERFORMANCE IN 915 TX
Kl01-ZE,Kl31 ecu, millenia manifold, ngk plugs, ngk wires, probe tranny/ and clutch (stock), VortecH FMU 12:1, Aeromotive AFPR, Tial .38mm Wastegate w/ 4lbs spring, Walboro 255 pump, AiResearch T4, 3" down pipe, GODSPEED manifold, Spearco Boost Gauges, BF Goodrich G-force drag radials.
14.8 1/4 mile all motor untimed on boost.
- Philthy
- Regular Member
- Posts: 150
- Joined: December 9th, 2005, 1:09 pm
- Location: Sacramento, California
- Contact:
That blows that the track times arn't accurate, hows that happen? Anywhos post those time slips, start there.
92 MX-3 GS, KL-ZE, OBX headers, 2-1/2" exhaust, XL Performance muffler, AASCO Aluminum flywheel,Pheno spacers,APEXi Airflow computer,Eibach springs,Tockico struts, Toyo RA1 205/50ZR15s, B&M short shifter. MS control arm Bushings, SS clutch line, SS brake hoses
-
- Senior Member
- Posts: 6451
- Joined: June 19th, 2004, 2:01 am
- Location: El Paso Tx U.S
- Contact:
i see a patern.. ur car did high 15 mine did low 17 ouch.. defenetly those times are off... how can that be with our mods... now my car is running ok... and with my mods im at 17? bull!!! and our elevation sucks..i checked and its over 4000 feet!! ouch on times...
-hec
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
- PWRD_BY_HKS
- Regular Member
- Posts: 696
- Joined: August 11th, 2004, 2:01 am
- Location: El Paso
okay now i know those times are all f-d up .... cobalt ss's ran low 16.... srt's ran mid 15s....that track it wack
jdmx-3 KID OF THE 
VICTORIA RACING
ZE PERFORMANCE IN 915 TX
Kl01-ZE,Kl31 ecu, millenia manifold, ngk plugs, ngk wires, probe tranny/ and clutch (stock), VortecH FMU 12:1, Aeromotive AFPR, Tial .38mm Wastegate w/ 4lbs spring, Walboro 255 pump, AiResearch T4, 3" down pipe, GODSPEED manifold, Spearco Boost Gauges, BF Goodrich G-force drag radials.
14.8 1/4 mile all motor untimed on boost.

VICTORIA RACING
ZE PERFORMANCE IN 915 TX
Kl01-ZE,Kl31 ecu, millenia manifold, ngk plugs, ngk wires, probe tranny/ and clutch (stock), VortecH FMU 12:1, Aeromotive AFPR, Tial .38mm Wastegate w/ 4lbs spring, Walboro 255 pump, AiResearch T4, 3" down pipe, GODSPEED manifold, Spearco Boost Gauges, BF Goodrich G-force drag radials.
14.8 1/4 mile all motor untimed on boost.