check out the interior of this mx-3 on ebay
- garfy1981
- Regular Member
- Posts: 288
- Joined: September 27th, 2004, 2:01 am
- antispam: ~SPAM*SUX~
- Location: UK, South-East
- Contact:
that car is in the same town as me lol !!!
never seen it around before.
not sure i could handle those seats, kebab + white leather is asking for trouble !!
never seen it around before.
not sure i could handle those seats, kebab + white leather is asking for trouble !!
2.5 Ze straight neck, blitz intake, mazdaspeed engine mounts, fidenza flywheel, CM II Clutch, KL-36 ecu, Magnecor 8mm Leads, Battery Relocation. Hotshot headers, 2.5 mandrel bent stainless exhaust, hi-flow cat, Speed hut dials, custom coilover set up. Custom willwood big brake conversion.
- PATDIESEL
- Senior Member
- Posts: 4476
- Joined: August 13th, 2001, 2:01 am
- antispam: ~SPAM*SUX~
- Location: Atlanta, GA.
After a further look, it might not be. It looks like the rear seat is the backrest of a 94 and the butt of a 93. The fronts are new to me altogether.

ZE -strait neck,headers,2.5 exhaust,pheno spacers,lower cross member,GC coils,MS struts,Brembo slotted rotors,filled MS mounts,SS brake/clutch lines, CAI,to rear bat reloc,Hella headlamps,Hella DE fogs 180WHP
- JWMX3
- Senior Member
- Posts: 2060
- Joined: March 23rd, 2004, 2:01 am
- Location: Grassie, Ontario
- Contact:
the fronts are 94+ mx3, i had the exact ones but swapped them out for the 93sPATDIESEL wrote:After a further look, it might not be. It looks like the rear seat is the backrest of a 94 and the butt of a 93. The fronts are new to me altogether.

94' Mx3 GS 0-60 in 7.53s [5 spd conversion / Rebuilt 2.5 KL]
- ilovemazdas
- Junior Member
- Posts: 12
- Joined: May 5th, 2006, 2:44 pm
- Location: UK / N.Ireland
- GregoryChristian
- Supporting Member
- Posts: 1413
- Joined: March 4th, 2003, 2:01 am
- Location: Gulf Coast