Clicking From Passenger Side Rear Wheel
Clicking From Passenger Side Rear Wheel
I have a clicking noise coming from my passenger side rear wheel. The click seems to rise and fall with speed. Is it the bearing that needs to be replaced? How long should this take to fix, and are any special tools needed?
Matt Domenick
1993 GS-ZE
1993 GS-ZE
- JWMX3
- Senior Member
- Posts: 2060
- Joined: March 23rd, 2004, 2:01 am
- Location: Grassie, Ontario
- Contact:
The rear bearings are replaced with a whole new hub assembly, while the fronts u reuse the hub and have the bearing pressed out
normally when a bearing is gone its more of a whuuuurrring noise, not clicking
what about when you go over bumps? is there any pronounced noises ?
normally when a bearing is gone its more of a whuuuurrring noise, not clicking
what about when you go over bumps? is there any pronounced noises ?

94' Mx3 GS 0-60 in 7.53s [5 spd conversion / Rebuilt 2.5 KL]
-
- Regular Member
- Posts: 141
- Joined: September 13th, 2005, 9:32 pm
- Location: Nova Scotia
- Contact:
- PATDIESEL
- Senior Member
- Posts: 4476
- Joined: August 13th, 2001, 2:01 am
- antispam: ~SPAM*SUX~
- Location: Atlanta, GA.
REAR is not an axle.
I'd also check that the brake clips aren't hitting the wheel. I had that happen to me once where one broke and was flapping like a playing card in a bicycle wheel.
I'd also check that the brake clips aren't hitting the wheel. I had that happen to me once where one broke and was flapping like a playing card in a bicycle wheel.


ZE -strait neck,headers,2.5 exhaust,pheno spacers,lower cross member,GC coils,MS struts,Brembo slotted rotors,filled MS mounts,SS brake/clutch lines, CAI,to rear bat reloc,Hella headlamps,Hella DE fogs 180WHP
-
- Senior Member
- Posts: 6451
- Joined: June 19th, 2004, 2:01 am
- Location: El Paso Tx U.S
- Contact:
hmm i had that problem..well have...its my rear rotors..to thin nd the brake is floating not touching the dish so it moves around..thats whats wrong in mine..im hoping urs is the same
-hec
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
-
- Regular Member
- Posts: 141
- Joined: September 13th, 2005, 9:32 pm
- Location: Nova Scotia
- Contact: