Corksport SS Brake Lines, Who have tryed them??

SIXPACK · Post by **SIXPACK** » August 15th, 2004, 6:52 pm

very strange..looking at Luc's site on his goodridge ss line install it looks like a perfect fit. maybe you got wrong ones.
here are some pics from his site.

FRONT
<img src="http://www.mx3gsr.freeservers.com/pics/frontline.jpg" alt=" - " />

BACK
<img src="http://www.mx3gsr.freeservers.com/pics/rearline.jpg" alt=" - " />

ROUND NUT
<img src="http://www.mx3gsr.freeservers.com/pics/nut.jpg" alt=" - " />

DJsMX-3 · Post by **DJsMX-3** » August 16th, 2004, 5:33 am

Yeah they look NOTHING like what i recieved actually they look excactely like the Goodridge-ones corksport sells though...

But if we order them from corksport theres no plasticcoating on "And that looks really professional on the ones i got" Allso theres probertly no Tüv approval on them either if ordered from USA...

Im sending them back and hoping they discover they mixed something up!

Macen · Post by **Macen** » September 1st, 2004, 5:00 pm

Got the new ones yet? I haven't got mine yet

DJsMX-3 · Post by **DJsMX-3** » September 2nd, 2004, 5:04 pm

No,havent heard anything from them but sent a mail earlier today...

Was beginning to wonder if you got the wrong ones too since i never got a reply back from you..

<small>[ September 02, 2004, 04:05 PM: Message edited by: Dennis Jørgensen ]</small>

Macen · Post by **Macen** » October 24th, 2004, 5:03 pm

I have got mine. They look ok. I tried to change the left rear one, but the nut on the pipe is a PITA to remove. I ended up making the nut round :/ Now I don' know what to do to remove the line.
Please help!

tatsu · Post by **tatsu** » October 28th, 2004, 1:21 am

I ran into the same issue changing out the front lines on our MX-3. Once the nut is stripped/rounded off, your only option is locking pliers (E.G. "Vise-Grip" pliers) to break them loose, then loosen the rest of the way by hand. As they say, "installation is the reverse of removal"...

nope-mx3 · Post by **nope-mx3** » October 28th, 2004, 3:00 am

I installed my Goodridge kit yesterday.

No fitment issues at all

Cant wait to do the clutch-line aswell.

Anyone got a good tip on performance rotors and pads? I`m gonna use my Mx3 on the track next season, so I want decent brakes.

nope-mx3

SIXPACK · Post by **SIXPACK** » October 28th, 2004, 3:25 am

I have been pretty happy with my Brembo cross drilled and slotted rotors from sportsbrake.
I use Hawk street+autocross compound but ferodo or EBC are probably also make good pads for street and track.

MX-3.com

Corksport SS Brake Lines, Who have tryed them??

Re: Corksport SS Brake Lines, Who have tryed them??

Re: Corksport SS Brake Lines, Who have tryed them??

Re: Corksport SS Brake Lines, Who have tryed them??

Re: Corksport SS Brake Lines, Who have tryed them??

Re: Corksport SS Brake Lines, Who have tryed them??

Re: Corksport SS Brake Lines, Who have tryed them??

Re: Corksport SS Brake Lines, Who have tryed them??

Re: Corksport SS Brake Lines, Who have tryed them??