SS braided brake lines, possible hoax.

kulluminati777 · Post by **kulluminati777** » June 4th, 2012, 1:09 am

oh ok and the subaru brake upgrade u guys speak of is bolt on or will i need more (searched with no results)

wytbishop · Post by **wytbishop** » June 4th, 2012, 1:35 am

Go to pg. 16 of my worklog. It's all there.

kulluminati777 · Post by **kulluminati777** » June 5th, 2012, 1:00 am

sweet will do...

mitmaks · Post by **mitmaks** » May 5th, 2013, 1:19 am

Can you put in millenia booster as well?

Josh · Post by **Josh** » May 6th, 2013, 11:47 am

I looked at the milly booster. the fire wall sits at an angle, completely different than the MX. So the res on the booster is slanted to compensate. I do not think it would work. but then again it may. I have not tried it.

mitmaks · Post by **mitmaks** » May 6th, 2013, 7:09 pm

When changing over to Millenia master cylinder do you leave your pushrod same length or do you have to adjust it?

wytbishop · Post by **wytbishop** » May 7th, 2013, 1:10 am

I believe the pushrods are different lengths. Another key difference is the ports are on the opposite side.

Josh · Post by **Josh** » May 7th, 2013, 6:45 pm

push rods are in fact different, but they are different because of the difference in the booster > firewall > to pedal distance. You should be able to use the stock GS Rod. I have it all sitting there I will try and look at it tonight. I have not done so yet as I am trying to find new wheels to finish my brake mod

MX-3.com

SS braided brake lines, possible hoax.

Re: SS braided brake lines, possible hoax.

Re: SS braided brake lines, possible hoax.

Re: SS braided brake lines, possible hoax.

Re: SS braided brake lines, possible hoax.

Re: SS braided brake lines, possible hoax.

Re: SS braided brake lines, possible hoax.

Re: SS braided brake lines, possible hoax.

Re: SS braided brake lines, possible hoax.