Hi Guys,
I have seen many things coming by on this website about CZT. I'm interested in the things they make (for example valve terrain package).
What does CZT stand for and do they have a website?
CZT website
-
WhiteFinish
- Regular Member
- Posts: 1635
- Joined: April 3rd, 2006, 9:48 am
- Location: Netherlands
- Contact:
-
marcdh
- Regular Member
- Posts: 1460
- Joined: July 26th, 2006, 3:54 pm
- Location: Belfast -Northern Ireland
- Contact:
Re: CZT website
They're no longer about. There's a bit of bad blood regarding CZT not finishing stuff. Pity, they seemed innovative. Things I can remember they made:
-CZT intake manifold (I think there was various versions of this, hppwdn had one for a while)
-CZT throttle body
-CZT valve train, titanium retainers etc, guessing upgraded springs
-CZT 'built' gear box
-CZT tranny brace
as for what it stands for, I think cryro was in it, T probably tuning? ah I dunno!
If you're looking for any CZT parts, best bet is PT member sales, probably won't be cheap though.
-CZT intake manifold (I think there was various versions of this, hppwdn had one for a while)
-CZT throttle body
-CZT valve train, titanium retainers etc, guessing upgraded springs
-CZT 'built' gear box
-CZT tranny brace
as for what it stands for, I think cryro was in it, T probably tuning? ah I dunno!
If you're looking for any CZT parts, best bet is PT member sales, probably won't be cheap though.
AZ-3 1498cc Turbo! EVO 8 turbo and manifold, 5 stud swap, SSR Type C, DIYPNP seq Megasquirt
Mx-3 2.5 V6 Turbo 291 BHP 251 lbft @ 8psi - Retired due to rust and back at uni
View Worklog
Mx-3 2.5 V6 Turbo 291 BHP 251 lbft @ 8psi - Retired due to rust and back at uni
View Worklog
-
WhiteFinish
- Regular Member
- Posts: 1635
- Joined: April 3rd, 2006, 9:48 am
- Location: Netherlands
- Contact:
Re: CZT website
Oke, that's the thing I'm interested in.
The CZT valve train had 2 stages (what i heared).
I think it was ferrea valves, interprep springs and chromely (???) retainers.
I would like to get to know more about these stages and where to get the individual parts
The CZT valve train had 2 stages (what i heared).
I think it was ferrea valves, interprep springs and chromely (???) retainers.
I would like to get to know more about these stages and where to get the individual parts