Page 1 of 3
Shifter bushings..
Posted: March 4th, 2009, 2:32 pm
by wytbishop
I have a diagram of the bushings in the bottom of the shifter, but I don't know the dimensions of the bushing at the transmission end. If anyone has one to measure or can help me somehow I would appreciate it. I bought a length of Nylatron GS yesterday and I'm gonna cut some bushings this weekend.
Re: Shifter bushings..
Posted: March 4th, 2009, 5:02 pm
by Mad Cow
Just wondering, would you be able to cut some bushings for a pacesetter shifter if I give you measurements? The outside diameter of these bushings is different from every other shifter.
Re: Shifter bushings..
Posted: March 4th, 2009, 5:09 pm
by fowljesse
I'll measure them for you right now.
here's the one mentioned:
It's dimentions are:
10mm ID
13mm OD
17mm OD lip
2mm wide lip
I'd be happy to test these for you
Re: Shifter bushings..
Posted: March 4th, 2009, 5:20 pm
by wytbishop
Mad Cow wrote:Just wondering, would you be able to cut some bushings for a pacesetter shifter if I give you measurements? The outside diameter of these bushings is different from every other shifter.
Absolutely. Be as detailed and as precise as you can and I'll cut them for you. You try em and if they fit good, you can pay me later.
How's that?
Re: Shifter bushings..
Posted: March 4th, 2009, 5:25 pm
by wytbishop
fowljesse wrote:I'll measure them for you right now.
You are a frickin Rock STAR! Give me a good sketch and I'll make as many as I can from the material I bought.
Re: Shifter bushings..
Posted: March 4th, 2009, 5:30 pm
by fowljesse
Sorry. My cell camera sucks
Re: Shifter bushings..
Posted: March 4th, 2009, 5:34 pm
by solo_ryder
Sweet, id be down for a set
Re: Shifter bushings..
Posted: March 4th, 2009, 5:40 pm
by Flyer
Remember kids, if fowljesse cannot break them, no one can!
Re: Shifter bushings..
Posted: March 4th, 2009, 7:30 pm
by Mad Cow
wytbishop wrote:Mad Cow wrote:Just wondering, would you be able to cut some bushings for a pacesetter shifter if I give you measurements? The outside diameter of these bushings is different from every other shifter.
Absolutely. Be as detailed and as precise as you can and I'll cut them for you. You try em and if they fit good, you can pay me later.
How's that?
That sounds perfect, but I won't be doing that just now, maybe in a week or 2. Is that ok?
Re: Shifter bushings..
Posted: March 4th, 2009, 9:27 pm
by fowljesse
I forgot to measure.. They're 15mm long
Re: Shifter bushings..
Posted: March 5th, 2009, 12:25 am
by _-Night-Shade-_
Are these the ones for the shifter? If so I'd like a set as well
Re: Shifter bushings..
Posted: March 5th, 2009, 12:54 am
by wytbishop
I've never machined this stuff before so lets just see how they turn out before I start promising a bunch of stuff. If they work well I will ask Jeff if it's ok to sell some around the forum.
Re: Shifter bushings..
Posted: March 5th, 2009, 12:57 am
by fowljesse
As Waterboy's friend says "You can Do eeet!"
Re: Shifter bushings..
Posted: March 5th, 2009, 1:03 am
by wytbishop
I know...I just don't want to start making promises yet.
Thanks for the sketch BTW.
Re: Shifter bushings..
Posted: March 5th, 2009, 1:20 am
by tehbrookzorz
Yippee!