question about 18s (yes I did search)

lefthandedgod · Post by **lefthandedgod** » April 30th, 2007, 12:11 am

Hello all,

Before I get any ribbing about how slow/ugly/crappy this will make my car, I have a nice set of OZ wheels for autocross/rally days.

I have a opportunity to grab some Enkei 18's for my mx-3 on the cheap. My only concern is that they are 18x8 with a 45mm offset. After searching for a few hours, I did not come across anything solid about what offset would work (anything from 38 to 42 seems popular to the 4 or so people using 18s). Any help (quickly) would be appreciated.

Oh, and the car has been dropped about 1.3in with ST springs.

Thanks all!

Ben

solo_ryder · Post by **solo_ryder** » April 30th, 2007, 12:24 am

Hmm, the only thing you are gonna run into is the width issue. IIRC I was running a 7.5" rim (could have been

with 215-35 tires and it was REAL close to the strut. But, if that works then all is good, the drop will be fine.