Ummm, my car died...

4-Cyl. Technical/Performance Discussions
Post Reply
MXTreme
Junior Member
Posts: 13
Joined: February 7th, 2003, 2:01 am
Location: Warner Robins

Ummm, my car died...

Post by MXTreme »

Hey guys, I was driving and my car got up to 3000 rpms in 5th gear, and I lost all power and it died. I don't know what it could be. My radio, lights, and such work, but my power steering went out. Now the car won't start. I have a half tank of gas. I just changed the oil about 500 miles ago. I haven't done anything recently that would have jolted anything loose. I guess my question here is: How can I tell what needs fixing? have yall seen anything that could be the answer? Any help would be greatly appreciated. Thanks.
User avatar
jpwmx3
Regular Member
Posts: 364
Joined: August 8th, 2002, 2:01 am
Location: Waterloo, Canada
Contact:

Re: Ummm, my car died...

Post by jpwmx3 »

Could be distributor cap/rotor.
User avatar
monty73741
Forum Moderator
Posts: 2651
Joined: February 11th, 2001, 2:01 am
Location: baltimore,md usa
Contact:

Re: Ummm, my car died...

Post by monty73741 »

thata what happend in my mx....<p>i had to replace the disty
does it turn over @ all
Jason Danaher
Please Help Support MX-3.com
MX-3.com Online Store - http://www.mx-3.com/osv3
CafePress - http://www.cafepress.com/mx3com
Freq2002
Regular Member
Posts: 178
Joined: July 27th, 2002, 2:01 am
Location: Oak harbor WA

Re: Ummm, my car died...

Post by Freq2002 »

Need more info!
Sounds it made, did it just die alla sudden or did it feel like it was lagging till it fianly stopped. Bangs, pops, crunchy noises, etc. There are an a$$load of possibilitis when ya say "it died",... Have a freind that just went thru a similar ordeal when her car just died. nothin goin on, just drivin at 50 on level ground & bang, dead,... Turned out the #1 camshaft bearing cap had fragged & seized the cam, broke the timing belt, & destroyed the head. Didn't make any noise, it just died,...
Be prepared for the worst, hope for the best.
You dont have to be doin anything to knock something loose. Some things just say fuggit!! & it breaks.
The contents of this post are the opinions of myself and are NEVER meant to be percieved as the "be all, end all". So cram it!! :p
Post Reply

Return to “4-Cyl. Technical/Performance”