92 ZE Mx-3 Parting out
92 ZE Mx-3 Parting out
Well I have lots of stuff but hardly any interior so I guess make requests for anything not listed:
****All prices include shipping****
Driver's power window switches $50
Passenger window switch $10
Jamex 1.75" lowering springs brand new SOLD
Triple guage piller for auto belts $40
Stainless steel pedals(blue Mx-3) $40
Billet aluminum short shifter with bearing(no bushings needed) $70
VRIS Tuner(in box under stereo) SOLD
Pheno Spacers for KLZE w/TB spacer $50
Black curved neck ZE manifold w/TB $180
Blue Front Valve cover $25
2.5" Custom catback with 2.5" tip sounds awesome $150
for pickup only
Will tear apart the motor for cams,heads,pullies whatever anyone wants. The tranny was rebuilt about 6000 miles ago and in really good shape $500 for local pickup if anyone needs one.
Thanks,
Shawn F.
<small>[ November 05, 2004, 05:36 PM: Message edited by: lazzyie ]</small>
****All prices include shipping****
Driver's power window switches $50
Passenger window switch $10
Jamex 1.75" lowering springs brand new SOLD
Triple guage piller for auto belts $40
Stainless steel pedals(blue Mx-3) $40
Billet aluminum short shifter with bearing(no bushings needed) $70
VRIS Tuner(in box under stereo) SOLD
Pheno Spacers for KLZE w/TB spacer $50
Black curved neck ZE manifold w/TB $180
Blue Front Valve cover $25
2.5" Custom catback with 2.5" tip sounds awesome $150
for pickup only
Will tear apart the motor for cams,heads,pullies whatever anyone wants. The tranny was rebuilt about 6000 miles ago and in really good shape $500 for local pickup if anyone needs one.
Thanks,
Shawn F.
<small>[ November 05, 2004, 05:36 PM: Message edited by: lazzyie ]</small>
93 Mx-3 GS klze swapped(sold)
96 Integra LS DD
91 Crx Si drag car
2.0L sleeved gsr block, forged internals, skunk2 valvetrain, HP racing intake manifold, Holset H1 turbo, 1000cc injectors, short geared lsd transmission, 3" turboback exhaust. 20 psi
96 Integra LS DD
91 Crx Si drag car
2.0L sleeved gsr block, forged internals, skunk2 valvetrain, HP racing intake manifold, Holset H1 turbo, 1000cc injectors, short geared lsd transmission, 3" turboback exhaust. 20 psi

- Dali
- Supporting Member
- Posts: 1621
- Joined: January 28th, 2003, 2:01 am
- antispam: No
- Location: Williams lake, BC
Re: 92 ZE Mx-3 Parting out
send me some pics of the vris tuner, also what do you have for the spacers, the bolts misc things, how old are they, are they for the ms8 intake etc. thanks, email me at unclesluggo@shaw.ca
1993 White gs klze.
- 2fazed
- Supporting Member
- Posts: 1885
- Joined: May 21st, 2002, 2:01 am
- Location: La Selva Beach, California
- Contact:
Re: 92 ZE Mx-3 Parting out
Need a 2.5 vaf
16 Hyundai Elantra Value Edition
06 Mazdaspeed6 2.3T
93 626 ES 2.5
92 Mx-3 RS 1.6
93 Mx-3 GS 2.5
93 Mx-3 RS 1.6
06 Mazdaspeed6 2.3T
93 626 ES 2.5
92 Mx-3 RS 1.6
93 Mx-3 GS 2.5
93 Mx-3 RS 1.6
- babyblueMX3
- Supporting Member
- Posts: 3755
- Joined: February 23rd, 2003, 2:01 am
- Location: Gatineau,Quebec,Canada
- Contact:
Re: 92 ZE Mx-3 Parting out
send me pics of the front valve cover
steve_racine17@hotmail.com
steve_racine17@hotmail.com
RIP 400whp ZE-T MX-3
Current car : Golf 01 GTI 1.8T (15 psi)
Current car : Golf 01 GTI 1.8T (15 psi)
- Sam Baker
- Regular Member
- Posts: 1461
- Joined: May 23rd, 2003, 2:01 am
- Location: Wellington, New Zealand
Re: 92 ZE Mx-3 Parting out
still have the VRIS Tuner? if so i'd take it.. also the IM/TB Spacers! lemme know thanks 

92 Autozam AZ3
Re: 92 ZE Mx-3 Parting out
$40 shipped kl-02 vaf i have a kl-42 ecu to if you want that let me knowOriginally posted by 2fazed:
Need a 2.5 vaf
I DO NOT have the bolts and such for the spacers, they fit on any KL block with KL-31 heads. I got all the nuts and bolts for $5 at ACE. They have 17,000 miles on them
The VRTuner and springs are spoken for.
I will try to get a digital camera this weekend to take some pics.
<small>[ November 05, 2004, 05:43 PM: Message edited by: lazzyie ]</small>
93 Mx-3 GS klze swapped(sold)
96 Integra LS DD
91 Crx Si drag car
2.0L sleeved gsr block, forged internals, skunk2 valvetrain, HP racing intake manifold, Holset H1 turbo, 1000cc injectors, short geared lsd transmission, 3" turboback exhaust. 20 psi
96 Integra LS DD
91 Crx Si drag car
2.0L sleeved gsr block, forged internals, skunk2 valvetrain, HP racing intake manifold, Holset H1 turbo, 1000cc injectors, short geared lsd transmission, 3" turboback exhaust. 20 psi

-
- Senior Member
- Posts: 3825
- Joined: June 26th, 2003, 2:01 am
- Location: Puyallup, WA
Re: 92 ZE Mx-3 Parting out
How much for the bottom end piece with the piston sleeves? I've got one lined up, but it's from Quebec, so shipping probably cost alot. What'd you sell it for sans shipping? Just to see if I can save some money. The DE block I picked up in Hollywood a few weeks ago is already overbored, so won't hold the ZE pistons I've already paid for. 

-
- Senior Member
- Posts: 3825
- Joined: June 26th, 2003, 2:01 am
- Location: Puyallup, WA
Re: 92 ZE Mx-3 Parting out
Out of curiosity, what'd the VRIS Tuner sell for?
Also, is the valve cover painted or poweder coated?
Also, is the valve cover painted or poweder coated?
-
- Regular Member
- Posts: 603
- Joined: August 2nd, 2001, 2:01 am
- Location: Brantford, Ontario, Canada
- Contact:
Re: 92 ZE Mx-3 Parting out
Pheno Spacers for KLZE w/TB spacer $50
Does that include shipping to Canada?
Does that include shipping to Canada?
92 MX-3 GS 2.5 KLZE
14.385 @ 98.21
14.385 @ 98.21
Re: 92 ZE Mx-3 Parting out
Valve cover is painted, $150 for the tuner, $60 shipped to canada seem fair for the Pheno spacers??
93 Mx-3 GS klze swapped(sold)
96 Integra LS DD
91 Crx Si drag car
2.0L sleeved gsr block, forged internals, skunk2 valvetrain, HP racing intake manifold, Holset H1 turbo, 1000cc injectors, short geared lsd transmission, 3" turboback exhaust. 20 psi
96 Integra LS DD
91 Crx Si drag car
2.0L sleeved gsr block, forged internals, skunk2 valvetrain, HP racing intake manifold, Holset H1 turbo, 1000cc injectors, short geared lsd transmission, 3" turboback exhaust. 20 psi

-
- Senior Member
- Posts: 3825
- Joined: June 26th, 2003, 2:01 am
- Location: Puyallup, WA
Re: 92 ZE Mx-3 Parting out
YGPM
<small>[ November 07, 2004, 05:07 PM: Message edited by: lakersfan1 ]</small>
<small>[ November 07, 2004, 05:07 PM: Message edited by: lakersfan1 ]</small>
- FIMotorMX-3
- Regular Member
- Posts: 191
- Joined: October 23rd, 2004, 2:01 am
- Location: Monmouth/Ocean county,NJ, USA
- Contact:
Re: 92 ZE Mx-3 Parting out
You have oem rear mudguards or oem sideskirts?
sold it to a friend.93 green MX-3 with ZE swap. KL36 ecu, modified carbon fiber intake from a civic hatch. Centerforce Dual Friction clutch from MX-6. black Konig Minuz wheels, Synthetic fluids, 3 gauge pillar pod with air/fuel, water temp and oil press. Autometer Shiftlight. B&M short shifter. 2.25 piping with a Greddy SP1 muffler, AWR urethane front motormount, pheno spacers, Intrax Springs, Mazdaspeed Sideskirts. The New Ride is a 2003 1.8t a4
check out myspace:
http://profile.myspace.com/index.cfm?fu ... D795345349
my cardomain: http://www.cardomain.com/ride/2142324 UPDATED!!!! 08/28/06 newest pics
check out myspace:
http://profile.myspace.com/index.cfm?fu ... D795345349
my cardomain: http://www.cardomain.com/ride/2142324 UPDATED!!!! 08/28/06 newest pics
-
- Senior Member
- Posts: 3825
- Joined: June 26th, 2003, 2:01 am
- Location: Puyallup, WA
Re: 92 ZE Mx-3 Parting out
Shawn, what happened? Change your mind? There are other things I need as well if you're still parting out.