.Cole's GS ZE Swap (Car Sold) 1982 blazer project now.

[Sleeper6]

Would a breather Filter work on our cars? like replacing the PCV on the valve cover?

On a stock ecu it will die. Too much of a vacuum issue to hold idle, what you can do is add a fuelfilter in line though to catch excess oil blowby.

[cWs306]

ohhh okay i get it. makes sense. and yah but wont that clog up eventually?

[Nd4SpdSe]

also if u still needed a klze dipstick Nd4SpdSe was selling one i think..PM him and see when he is back home...

Lol, yes, yes I do!

Would a breather Filter work on our cars? like replacing the PCV on the valve cover?

On a stock ecu it will die. Too much of a vacuum issue to hold idle, what you can do is add a fuelfilter in line though to catch excess oil blowby.

People used to do that mod alot many years ago, they never seemed to have a problem with it but back then cops would do random inspections under the hood, and they would ticket you for it since it's venting to atmosphere, which it's a no-no.

[mikeinaus]

http://www.mx-3.com/phpBB3/viewtopic.ph ... =catch+can

[cWs306]

ohhh so a breather filter will work? im confused haha, do i need one thats very dense? like so it takes a bit of a preasure to push through? cause i tried to see what happens when i pull the pcv out as it running, it died. lol. and where im from, theres a very rare chance of something being illegal. the only thing i found illegal when i did my research on how dark lights can be tinted. its said nitrous systems.


And any chance you could see what shipping would be for the dip stick to s7m2m6. i broke mine when i was unloading the motor off the back of the truck lol.

And that thermos catch can is quite a smart idea. awesome. looks cool too. well if i cant get a breather filter to work thats the way ima go.

[cWs306]

Some pictures of the hei mod and modded cap.



new valve cover and what not. going to do my intake sometime soon.

[mx3matt]

the rubbers on the vaf are splitting pretty bad. replace or face the lean machine lol

[kulluminati777]

do you have something under you coolant overflow tank or is it just held up on the side?

[cWs306]

yaah only the one on the right side is cracking, i got another one just havent put it on yet. and yes i do, theres a little chunk of sheet metal bent and bolted on, just bolted between the frame rail and overflow, goes down and bends under it. does the job for now, but i wanna get an aluminum overflow and PS fluid canister. just havent found any for sale

[kulluminati777]

oh ok i was thinking of putting mine down there i have mine sitting ON the frame rail with only the bottom bolt attached

[cWs306]

yaah i had it down there for a summer n winter without the little shield. it was perfectly fine, and yah i also only have the 1 bolt holding mine onto the side, the one right by the ground on the front . just tighten it good, not much antifreeze so its not heavy.

[cWs306]

Here's what ive had my eye on for months and have finally worked up the courage to let my car go.
(trust me, if i had 2 parking spots. i would not sell my car. but i dont want it to sit in on a farm and be lonely and un-driven)

Called The Mean Machine. 1982 chevy blazer 2wd.(has the 87 front bumper on it, will be replaced with a 82 so it has signals in the bumper) Leather seats, full stereo, lowered, 350sbc, turbo 400 tranny, 2500 stall. 4:11 gears. plans are either go with a ls1-7 swap then ill have better mile per gallon or rebuild a BBC with some kind of boost adder. Carburated motor with a turbo would be killer.


Yes i know its yellow.

[Nd4SpdSe]

Yes i know its yellow.

Nothing wrong with yellow!

[cWs306]

hahaha nope not at all. gives it some character i think. and ohh your xterra is so nice.

[Daninski]

I was about to comment you may need more of a heat sink on that modual but it now some how seems redundant.