Wonders?

[Smashmig]

i was on egay and was wondering why rx7 coilovers are cheaper that mx3 coilovers. so was wondering if these would work. http://www.ebay.com/itm/GODSPEED-86-91- ... 5890bc8fc6

[Daninski]

Check out the specs between the rx7 and the mx3 and you'll see differences. Next question..
Go to a site like RockAuto.com and see what they list for both vehicles.

[Smashmig]

i just figured rx7 were more "high end" so the parts would be more expensive

[youdirtyfox]

You can buy high end coilovers for the MX-3. They are around £1300, so thats about $2000
to you lot I would imagine.

generally speaking the more popular a car is the cheaper the parts. Just look at the VAG group suspension its very cheap for quality coilovers.

[Josh]

Usually, the more that a product sells the cheaper it becomes.

[Smashmig]

True didnt even think of that. Being that most civic drivers can do loads to their cars for pocket change.

[Josh]

Well take Altezza's for instance they originally were like 350.00 a set when the first proto run was sold. over the years they have dropped from that to 275, 225, 200, and now they are what 100 bucks. The MX3 is a niche car, not many have them and even fewer purchase aftermarket for them.