AaronTietje - 1993 MX3 Phase 2

solo_ryder · Post by **solo_ryder** » March 16th, 2011, 8:20 pm

AaronTietje wrote:Very close they are the +10

Why didnt you go with the +20s? I guess +10 will fit but its that much harder.. What you gonna run for suspension? 195 tires?

AaronTietje · Post by **AaronTietje** » March 16th, 2011, 8:31 pm

I'm thinking that I will be doing a custom rear 1\4 flair with another rear 1\4 panel. It won't be a "widebody". Rather it will look factory but be an inch to two inches wider.

solo_ryder · Post by **solo_ryder** » March 16th, 2011, 8:46 pm

AaronTietje wrote:I'm thinking that I will be doing a custom rear 1\4 flair with another rear 1\4 panel. It won't be a "widebody". Rather it will look factory but be an inch to two inches wider.

Have you thought about adding smooth flares or doing a pull on the rear arches?

I saw sometime back a guy who molded in 1st gen mx6 rear QP to a mx3, as that have a protruding flare to them.. Just an idea

AaronTietje · Post by **AaronTietje** » March 16th, 2011, 9:05 pm

My biggest concern is to maintain the factory body line. Solo, if you can direct me to a pic of that mx6 flair I would def. like to check it out.

weede_klze · Post by **weede_klze** » March 19th, 2011, 3:23 pm

wow, looks amazing - what caliper will be?

AaronTietje · Post by **AaronTietje** » March 19th, 2011, 5:58 pm

weede_klze wrote:wow, looks amazing - what caliper will be?

I need to decide between a wilwood and USbrake.

AaronTietje · Post by **AaronTietje** » April 2nd, 2011, 10:43 pm

Well I got two new tires for my rims.

205/40/16

AaronTietje · Post by **AaronTietje** » April 2nd, 2011, 10:44 pm

AaronTietje · Post by **AaronTietje** » May 31st, 2011, 1:28 am

Well, I did the unthinkable today............. I took a perfectly good wrap around spoiler and began some surgery.

Josh · Post by **Josh** » May 31st, 2011, 2:11 pm

AaronTietje wrote:Well, I did the unthinkable today............. I took a perfectly good wrap around spoiler and began some surgery.

If i had known that i would have sold you my other one...

AaronTietje · Post by **AaronTietje** » May 31st, 2011, 2:33 pm

Well, I didn't know I was going to do it till yesterday.

Pics will be up soon.

Josh · Post by **Josh** » May 31st, 2011, 2:37 pm

Good deal, I would like to see what you have planned.

AaronTietje · Post by **AaronTietje** » June 4th, 2011, 9:04 pm

Well it started off with some foam..................

and some fiberglass pcs. from this................

a few screws..............................................

Then fiberglass and structural filler..................

Josh · Post by **Josh** » June 6th, 2011, 6:57 pm

nice, can't wait to see the finished product.

AaronTietje · Post by **AaronTietje** » June 6th, 2011, 10:35 pm

Well I started the other side today and am pleased with the rough finish and uniformity. (if that's a word

)

MX-3.com

AaronTietje - 1993 MX3 Phase 2

Re: ROTA 16x8 BRONZE AaronTietje - 1993 MX-3 GS

Re: ROTA 16x8 BRONZE AaronTietje - 1993 MX-3 GS

Re: ROTA 16x8 BRONZE AaronTietje - 1993 MX-3 GS

Re: ROTA 16x8 BRONZE AaronTietje - 1993 MX-3 GS

Re: ROTA 16x8 BRONZE AaronTietje - 1993 MX-3 GS

Re: ROTA 16x8 BRONZE AaronTietje - 1993 MX-3 GS

Re: ROTA 16x8 BRONZE AaronTietje - 1993 MX-3 GS

Re: ROTA 16x8 BRONZE AaronTietje - 1993 MX-3 GS

Re: ROTA 16x8 BRONZE AaronTietje - 1993 MX-3 GS

Re: ROTA 16x8 BRONZE AaronTietje - 1993 MX-3 GS

Re: ROTA 16x8 BRONZE AaronTietje - 1993 MX-3 GS

Re: ROTA 16x8 BRONZE AaronTietje - 1993 MX-3 GS

Re: Canadian er..custom spoiler AaronTietje - 1993 MX-3 GS

Re: Canadian er..custom spoiler AaronTietje - 1993 MX-3 GS

Re: Canadian er..custom spoiler AaronTietje - 1993 MX-3 GS