Power steering and heat no working! I need help.

V6 Technical/Performance Discussions
Post Reply
dewyn
Junior Member
Posts: 17
Joined: July 7th, 2008, 5:38 am

Power steering and heat no working! I need help.

Post by dewyn »

Hey guys so I got a 94 mx3 gs. 5 speed. I hit a snow drift because well... i live in canada. Anyways afterwards my power steering and heat stopped working. Im afraid to drive the car cause I don't want it overheat and well its cold.

I took a look when I got home and I'm pretty sure I lost a belt connected to the power steering pulley and whatever else it goes too.

Im not a car savy guy but I really need my car back asap and do not want to take it to a shop, I have a mechanic friend that can fix it but I need to know what parts to get.

I also live out in the boonies so I can't drive the car into the closest city as its far away.

Thanks in advance for any advice.
User avatar
solo_ryder
Senior Member
Posts: 6289
Joined: October 16th, 2004, 2:01 am
Location: British Columbia

Re: Power steering and heat no working! I need help.

Post by solo_ryder »

Your PS/Waterpump belt came off proly or is loose and slipping. Those two systems run on the same belt, make sure you dont drive your car too far as it will overheat as your waterpump will not be turning. Make sure the pulley is intact as well, it is possible it fell off. It is accessible on the rear passenger side of the motor, underneath the powersteering pump

You can see the pulley on the bottom left of this pic. Looks like he bypassed the PS pump but you get the idea:
Image
dewyn
Junior Member
Posts: 17
Joined: July 7th, 2008, 5:38 am

Re: Power steering and heat no working! I need help.

Post by dewyn »

Do you know which pulley I loosen to get it on?
User avatar
solo_ryder
Senior Member
Posts: 6289
Joined: October 16th, 2004, 2:01 am
Location: British Columbia

Re: Power steering and heat no working! I need help.

Post by solo_ryder »

Yea that black pulley on the bottom left. Your pulley will be silver probably. To loosen it you need a 17mm open end and you need to loosen the nut on the front of the pulley. However, do not take it off, just loosen it abit. Then you will see a threaded shaft that sticks down abit from the pulley, you will want to use a 10mm socket and turn that either left or right to raise or lower the pulley to make tension on the belt.

In the pic you can see the small shaft I am talking about at the bottom of the picture below the pulley
dewyn
Junior Member
Posts: 17
Joined: July 7th, 2008, 5:38 am

Re: Power steering and heat no working! I need help.

Post by dewyn »

Is that the 4 cyl engine? Cause I got the 1.8L k8 and i went and took a look at it and it doesn't look the same.
User avatar
solo_ryder
Senior Member
Posts: 6289
Joined: October 16th, 2004, 2:01 am
Location: British Columbia

Re: Power steering and heat no working! I need help.

Post by solo_ryder »

Its a v6 and it might look different cause that one doesnt have the powersteering or timing cover on.

Just follow my instructions.
User avatar
Nd4SpdSe
Senior Member
Posts: 11213
Joined: May 25th, 2002, 2:01 am
Location: Québec City, Quebec, Canada
Contact:

Re: Power steering and heat no working! I need help.

Post by Nd4SpdSe »

When you say you have no heat, does your car get up to running temp?
1992 Mazda Mx-3 GSR - 2.5L KLZE : Award Winning Show Car & Race Car ['02-'09] (Retired)
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
User avatar
Daninski
Supporting Member
Posts: 7055
Joined: June 18th, 2007, 10:51 am
Location: Trenton ON.

Re: Power steering and heat no working! I need help.

Post by Daninski »

Oh for the love of God, just have a mechanic check to see if you've got a belt missing. {Dan face palms himself.}
2004 Subaru WRX Silver, stage 2, minty interior.
2002 Subaru WRX Blue, SOLD (best E test numbers I've ever seen)
94 MX-6. Sold
92 GS KLZE 5 Speed
96 GS 5 speed, KLZE, Sold
95 GS Minty Shape Sold
92 GS Sold
92 GS Parts Car scrapped.
Feedback viewtopic.php?f=37&t=66348" onclick="window.open(this.href);return false;
7477th member.

I know you believe that you understand what you think I said but I'm sure you realize that what you heard is not what I meant.
dewyn
Junior Member
Posts: 17
Joined: July 7th, 2008, 5:38 am

Re: Power steering and heat no working! I need help.

Post by dewyn »

Man I'm not going to pay like $65 for a tow to a shop thats going to be like yep, its broken in a matter of 3 seconds, oh then charge me another $55 just for me to pop the hood for them.... Then say oh we can't do anything until the new year cause we're packed, then charge me double for the belt, triple for labour... cause well yeah, its a autos shop, instead of me trying to figure it out which I have already, I paid $20 for the belt and about 25 mins of my time and the cars back.

Instead of face palm, should punch yourself.

Just my $.02
User avatar
solo_ryder
Senior Member
Posts: 6289
Joined: October 16th, 2004, 2:01 am
Location: British Columbia

Re: Power steering and heat no working! I need help.

Post by solo_ryder »

dewyn wrote:
Instead of face palm, should punch yourself.

Just my $.02
Haha awesome.

So you were able to fix it with the steps I gave you?
User avatar
Nd4SpdSe
Senior Member
Posts: 11213
Joined: May 25th, 2002, 2:01 am
Location: Québec City, Quebec, Canada
Contact:

Re: Power steering and heat no working! I need help.

Post by Nd4SpdSe »

dewyn wrote:Man I'm not going to pay like $65 for a tow to a shop thats going to be like yep, its broken in a matter of 3 seconds, oh then charge me another $55 just for me to pop the hood for them.... Then say oh we can't do anything until the new year cause we're packed, then charge me double for the belt, triple for labour... cause well yeah, its a autos shop, instead of me trying to figure it out which I have already, I paid $20 for the belt and about 25 mins of my time and the cars back.

Instead of face palm, should punch yourself.
1) You said you're not car savy
2) You couldn't tell forsure if you lost a belt or not
3) You can't distinguish an I4 to a V6

It wasn't looking to confident that you could diagnose, never mind repair your car. That's why Daninski recommeded to take it to a shop rather than trying to guess your way through the repair.

Glad you got it running, but he was just concerned about you getting it right and working. You didn't leave much for confidence in your abilities.
1992 Mazda Mx-3 GSR - 2.5L KLZE : Award Winning Show Car & Race Car ['02-'09] (Retired)
2004 Mazda RX-8 GT - Renesis Wankel : LS3 Coils, BHR Mid-Pipe + Falken RT-615K 245/40r18
2011 Mazda Mazda2 GS - 1.5L Manual : Yozora Edition (1 of 500)
2003 Nissan Xterra SE - 4x4 Supercharged : 2" Body Lift, 4" Suspension Lift & 33" MTR Kevlar
2001 Nissan Frontier SE - The Frontrailer : Expedition/Off-Road Trailer Project
User avatar
Ryan
Senior Member
Posts: 7199
Joined: April 7th, 2008, 1:06 pm
antispam: ~SPAM*SUX~
Location: Manitoba

Re: Power steering and heat no working! I need help.

Post by Ryan »

I'm going to help him out tomorrow, he lives like an hour north of me.. I actually sold him this car.
Now with Moderator power!

Black '93 BP RS - wrecked, parted, scrapped.
Green GS - Sold.
Black GS - Summer DD/Race car - Fancy KLZE
Red GS - K8-ATX -> MTX-KLDE - Frakencar. Scrapped
White GS - Rusty. Parts. Scrapped
1997 BMW M3 - my summer baby
2002 BMW 325Xi - sold
2003 Forester Xti - EJ20K swapped.
Feedback
User avatar
solo_ryder
Senior Member
Posts: 6289
Joined: October 16th, 2004, 2:01 am
Location: British Columbia

Re: Power steering and heat no working! I need help.

Post by solo_ryder »

Ryan wrote:I'm going to help him out tomorrow, he lives like an hour north of me.. I actually sold him this car.
Sounds like he's putting it to good use.
User avatar
Ryan
Senior Member
Posts: 7199
Joined: April 7th, 2008, 1:06 pm
antispam: ~SPAM*SUX~
Location: Manitoba

Re: Power steering and heat no working! I need help.

Post by Ryan »

yeah, lol, its seen a lot :P

The tensioner bracket actually broke right where the tensioner bolt threads through. I just replace the bracket, but he's still having heat issues. I think that car burned a bit of coolant, so I'm getting him to check that first.
Now with Moderator power!

Black '93 BP RS - wrecked, parted, scrapped.
Green GS - Sold.
Black GS - Summer DD/Race car - Fancy KLZE
Red GS - K8-ATX -> MTX-KLDE - Frakencar. Scrapped
White GS - Rusty. Parts. Scrapped
1997 BMW M3 - my summer baby
2002 BMW 325Xi - sold
2003 Forester Xti - EJ20K swapped.
Feedback
Post Reply

Return to “V6 Technical/Performance”