Anti-Drop Shifter Bracket for 5-speed cars
- 
				Rumnhammer
 - Supporting Member
 - Posts: 44
 - Joined: August 30th, 2005, 5:17 pm
 - Location: Baltimore MD
 
Re: Anti-Drop Shifter Bracket for 5-speed cars
Installation requires drilling one 1/4 inch hole after measuring.   The bracket comes with hardware and instructions.
Chris Rummel
			
			
									
						
							Chris Rummel
94 Miata R package with turbo
91 festiva L with B6T and everthing else modded too.
2008 Mazda 5
No MX3 but you can tell I am a mazda guy
			
						91 festiva L with B6T and everthing else modded too.
2008 Mazda 5
No MX3 but you can tell I am a mazda guy
Re: Anti-Drop Shifter Bracket for 5-speed cars
ok i installed this but now i hear a loud clicking noise occasionally when i shift lol the bracket is as tight as possible...any suggestions as to why this is happening..
			
			
									
						
										
						- 
				Rumnhammer
 - Supporting Member
 - Posts: 44
 - Joined: August 30th, 2005, 5:17 pm
 - Location: Baltimore MD
 
Re: Anti-Drop Shifter Bracket for 5-speed cars
No Idea, never had any noise reported before, the bracket does not move only supports the shifter assembly.
Chris
			
			
									
						
							Chris
94 Miata R package with turbo
91 festiva L with B6T and everthing else modded too.
2008 Mazda 5
No MX3 but you can tell I am a mazda guy
			
						91 festiva L with B6T and everthing else modded too.
2008 Mazda 5
No MX3 but you can tell I am a mazda guy
Re: Anti-Drop Shifter Bracket for 5-speed cars
Check your shifter bushings or the bolt that holds them in place, it may be loose...
			
			
									
						
							'94 MX3 GS (black)-- 2.5L DE w/ straight neck IM, SSAC Headers, KYB-GR2's, Intrax Springs, CM Stage I clutch, OBX STS, filled front & rear mounts, CAI- SOLD 
Buyer Feedback: viewtopic.php?f=37&t=62426" onclick="window.open(this.href);return false;
viewtopic.php?f=37&t=69003" onclick="window.open(this.href);return false;
"Amatuers practice until they can get it right; professionals practice until they can't get it wrong"
			
						Buyer Feedback: viewtopic.php?f=37&t=62426" onclick="window.open(this.href);return false;
viewtopic.php?f=37&t=69003" onclick="window.open(this.href);return false;
"Amatuers practice until they can get it right; professionals practice until they can't get it wrong"
- 
				mazdaspeedx6
 - Junior Member
 - Posts: 3
 - Joined: October 25th, 2008, 10:44 pm
 
Re: Anti-Drop Shifter Bracket for 5-speed cars
please tell me you guys still make this, looked everywhere for a new one and i cant find it and this it my only and last resort if you guys have it my email is onispeedsixer@gmail.com" onclick="window.open(this.href);return false;" onclick="window.open(this.href);return false; please let me know asap
			
			
									
						
										
						- 
				Rumnhammer
 - Supporting Member
 - Posts: 44
 - Joined: August 30th, 2005, 5:17 pm
 - Location: Baltimore MD
 
Re: Anti-Drop Shifter Bracket for 5-speed cars
Hi all, just a quick reminder.   I still make these, and I just finished a batch of 13 today.
Price is the same $28 USD shipped.
I take paypal and international money orders, but I prefer paypal.
My email is still Rumnhammer@aol.com" onclick="window.open(this.href);return false; and that is the email to send payment to as well.
Get them while they are in stock.
Chris Rummel
			
			
									
						
							Price is the same $28 USD shipped.
I take paypal and international money orders, but I prefer paypal.
My email is still Rumnhammer@aol.com" onclick="window.open(this.href);return false; and that is the email to send payment to as well.
Get them while they are in stock.
Chris Rummel
94 Miata R package with turbo
91 festiva L with B6T and everthing else modded too.
2008 Mazda 5
No MX3 but you can tell I am a mazda guy
			
						91 festiva L with B6T and everthing else modded too.
2008 Mazda 5
No MX3 but you can tell I am a mazda guy
- 
				Sleeper6
 - Regular Member
 - Posts: 1523
 - Joined: March 8th, 2010, 7:21 pm
 - antispam: ~SPAM*SUX~
 - Location: Canandaigua, NY
 
Re: Anti-Drop Shifter Bracket for 5-speed cars
any chance you can upload a fresh image?
			
			
									
						
							92 GS gold (driver) worklog> http://mx-3.com/phpBB3/viewtopic.php?f=46&t=73405" onclick="window.open(this.href);return false;
93 GS red (wrecked)
 I modify my ride so I can drive around the stupid people 
			
						93 GS red (wrecked)
Re: Anti-Drop Shifter Bracket for 5-speed cars
A new image would be nice. Sounds like something I'd totally want. One benefit of working at Mazda is that when mine dropped I got a whole new assembly. This would be nice though. Wait...never mind. Page 5 has them. I guess I'll be working something out this weekend. Hopefully you'll hear from me soon.
			
			
									
						
										
						- 
				Rumnhammer
 - Supporting Member
 - Posts: 44
 - Joined: August 30th, 2005, 5:17 pm
 - Location: Baltimore MD
 
Re: Anti-Drop Shifter Bracket for 5-speed cars
LOL, I was going to say check the earlier pages for pics.   Still looks the same and as long as the earlier pic of it in place is still good check there.
I usually sell about 8 to 10 of these a year, so the new batch should last me through the winter.
If I sell most of these by October, I'll make another batch because I hate making them in the winter, my shed has no heat. That aside buy all you want, I can always make more. Now that I made a jig, I can make a dozen in an afternoon.
Chris Rummel
			
			
									
						
							I usually sell about 8 to 10 of these a year, so the new batch should last me through the winter.
If I sell most of these by October, I'll make another batch because I hate making them in the winter, my shed has no heat. That aside buy all you want, I can always make more. Now that I made a jig, I can make a dozen in an afternoon.
Chris Rummel
94 Miata R package with turbo
91 festiva L with B6T and everthing else modded too.
2008 Mazda 5
No MX3 but you can tell I am a mazda guy
			
						91 festiva L with B6T and everthing else modded too.
2008 Mazda 5
No MX3 but you can tell I am a mazda guy
- Mooneggs
 - Forum Moderator
 - Posts: 6128
 - Joined: August 10th, 2005, 10:08 pm
 - antispam: ~SPAM*SUX~
 - Location: Hillsboro, OR
 - Contact:
 
Re: Anti-Drop Shifter Bracket for 5-speed cars
yeah page 5 has the pics.  I've had one of these in my parts box for a few years just in case  
   I'm glad I haven't had to use it yet!
			
			
									
						
							My Feedback
92 mx-3 gs klze 'race car' IP 15.05 @ 92.5mph
92 mx-3 gs klze 'daily driver' IP 14.55 @ 95.7mph
http://www.cardomain.com/id/Mooneggs

			
						92 mx-3 gs klze 'race car' IP 15.05 @ 92.5mph
92 mx-3 gs klze 'daily driver' IP 14.55 @ 95.7mph
http://www.cardomain.com/id/Mooneggs

Re: Anti-Drop Shifter Bracket for 5-speed cars
Plain and simple. Got one. Love it. Buy it, or you'll regret it!
			
			
									
						
										
						- 
				Juans_93_MX3
 - Senior Member
 - Posts: 2220
 - Joined: October 17th, 2004, 2:01 am
 - Location: SLC, Utah
 
Re: Anti-Drop Shifter Bracket for 5-speed cars
You still selling this bracket?
			
			
									
						
							2008 Mazda 3
1993 MX3 GS
KLZE, Fidanza flywheel, KL31 CAMs, South Bend Stage I Clutch, Pacesetter STS, SS AutoChromes, Magnaflow muffler, 2.25' Exhaust, CAI, Blaster Coil HEI, KLDE Valvetrain, 5 Speed Swap
			
						1993 MX3 GS
KLZE, Fidanza flywheel, KL31 CAMs, South Bend Stage I Clutch, Pacesetter STS, SS AutoChromes, Magnaflow muffler, 2.25' Exhaust, CAI, Blaster Coil HEI, KLDE Valvetrain, 5 Speed Swap
- 
				Rumnhammer
 - Supporting Member
 - Posts: 44
 - Joined: August 30th, 2005, 5:17 pm
 - Location: Baltimore MD
 
Re: Anti-Drop Shifter Bracket for 5-speed cars
Yes, I do.  Have some currently too.
Chris
			
			
									
						
							Chris
94 Miata R package with turbo
91 festiva L with B6T and everthing else modded too.
2008 Mazda 5
No MX3 but you can tell I am a mazda guy
			
						91 festiva L with B6T and everthing else modded too.
2008 Mazda 5
No MX3 but you can tell I am a mazda guy
- 
				Weistal67
 - Junior Member
 - Posts: 22
 - Joined: July 25th, 2010, 11:59 pm
 - antispam: ~SPAM*SUX~
 - Location: Calgary, Alberta, Canada
 
Re: Anti-Drop Shifter Bracket for 5-speed cars
Reviving an old thread here but hoping you still have some/are still making them. Let me know. had the shifter drop on me and tired of jamming it back up.
Aaron
			
			
									
						
										
						Aaron
Re: Anti-Drop Shifter Bracket for 5-speed cars
i wouldnt mind getting one too just before anything does happen.