intake manifold
-
fredroponics
- Junior Member
- Posts: 18
- Joined: July 30th, 2009, 1:37 pm
- antispam: No
- Location: kissimmee florida
- Contact:
intake manifold
i have a k8... can i put a ze manifold on my car... will it fit?
93 mx3 1.8 v6...under construction
-
Sleeper6
- Regular Member
- Posts: 1523
- Joined: March 8th, 2010, 7:21 pm
- antispam: ~SPAM*SUX~
- Location: Canandaigua, NY
Re: intake manifold
nope, the bolt pattern is off as well as the runners are shaped differently. If anything look up an intake gasket for a k8 and a klde youll see what I mean.
92 GS gold (driver) worklog> http://mx-3.com/phpBB3/viewtopic.php?f=46&t=73405" onclick="window.open(this.href);return false;
93 GS red (wrecked)
I modify my ride so I can drive around the stupid people
93 GS red (wrecked)
I modify my ride so I can drive around the stupid people -
fredroponics
- Junior Member
- Posts: 18
- Joined: July 30th, 2009, 1:37 pm
- antispam: No
- Location: kissimmee florida
- Contact:
-
marcdh
- Regular Member
- Posts: 1460
- Joined: July 26th, 2006, 3:54 pm
- Location: Belfast -Northern Ireland
- Contact:
Re: intake manifold
Yes you can. Bolt pattern for ZE/DE/K8 is the same. I had a straight neck on my k8 whilst I had the ZE out for overhaul. I also port matched the heads to ZE square ports. It's not going to do much/anything for you without supporting mods though.
AZ-3 1498cc Turbo! EVO 8 turbo and manifold, 5 stud swap, SSR Type C, DIYPNP seq Megasquirt
Mx-3 2.5 V6 Turbo 291 BHP 251 lbft @ 8psi - Retired due to rust and back at uni
View Worklog
Mx-3 2.5 V6 Turbo 291 BHP 251 lbft @ 8psi - Retired due to rust and back at uni
View Worklog