A TON OF STUFF STILL FOR SALE. List getting smaller( SUP

Do you have an MX-3 related item for sale? Post a quick note here.
Post Reply
curve
Regular Member
Posts: 186
Joined: December 12th, 2001, 2:01 am
Location: Louisiana
Contact:

A TON OF STUFF STILL FOR SALE. List getting smaller( SUP

Post by curve »

Here is all the parts that I have left from my mx-3 that was purchased by another one of mx-3.com users. If you have any questions on any of these parts feel free to email me at curve10780@aol.com and I will get back to you as fast as I can. Oh yeah the car was a 93 gs Blaze red in color and a 1.8 in it.
Well here goes the stuff for sale:

--Driver and passenger side windows
--Front crossbrace support
--Bumper rebar
--Hood latch
--Both electric fans
--Driver side front fender
--Windsheild wiper motor
--Hood hinges
--Seat belt control module
--Air Conditioner blower motor and fan
--Rear seatbelt assemblies
--Power mirrors (need paint)
--Power mirror control switch
--Stock tail lights (2 sets)
--Hazard lights and rear defrost switch
--Air conditioner controls

I ALSO HAVE THE FOLLOWING PLASTIC PIECES:

--Glovebox Without latch
--big plastic piece under the steering column
--Also the actual steering column cover
--aroung the gauge bezel
--Double air vent in the middle with the ac button in it.
--Plastic behind door handles

Here is a list of spare parts that I also will sell.

--1 set of stock suspension springs
--2 spare 15 inch factory wheels
--3 sets of exhaust manifolds
--2 y-pipes
--2 K8 cats
--K8 Engine block with cranck, rods, and pistons
--K8 complete set of heads
--K8 water pump
--K8 complete intake manifold with throttle body and fuel rails
--2 Klo3 complete intake manifolds with fuel rails and throttle body.
--K8 cams
--K8 cam pulleys (2 sets)
--LOTS MORE, JUST ASK FOR WHAT YOU NEED AND I MAY HAVE IT.

THERS ARE A FEW OTHER PIECES THAT IM NOT SURE WHERE THEY GO SO EMAIL ME WITH WHAT YOU NEED AND I PROBABLY GOT IT.

Im leting these parts go for the best price so email me with what you want and we will get it going.

PLease email me with request for a part

curve10780@aol.com

<small>[ March 03, 2004, 09:53 PM: Message edited by: curve ]</small>
93 KLZED Mx-3 with MSD ignition, LSD tranny, clutchmasters stage 3 clutch, short throw shifter, underdrive pulleys, Nology plug wires, header with open 2.5" exhaust and ractive muffler, and of course 125 shot Zex system with bottle heater electric bottle opener and purge valve, all autometer carbon fiber gauges, (Dash is completely custom in the gauge cluseter area), alpine deck with 6 disc changer, orion 32 band digital eq, 5 Linear power amplifiers, 2 alpine digital crossovers, 1 JL w5 12" woofer fiberglassed into the spare tire hole, q-form kick panels with 5 1/4 and tweeters, fiberglassed door panels and rear panels, alpine security system, also ground control coilovers, 17" Konig wheels with nitto tires, ractive rear strut tower brace, cross drilled and slotted roters on all 4 corners, GTR rear spoiler, 2 Sets of neons, and clear bumper and corner lights. I cant take credit for building this car it belonged to another mx-3er who built the whole thing and if you would like to see it being built go to Woodyscustomcreations.com

1/4 mile times 13.46 at 103
curve
Regular Member
Posts: 186
Joined: December 12th, 2001, 2:01 am
Location: Louisiana
Contact:

Re: A TON OF STUFF STILL FOR SALE. List getting smaller( SUP

Post by curve »

ttt
93 KLZED Mx-3 with MSD ignition, LSD tranny, clutchmasters stage 3 clutch, short throw shifter, underdrive pulleys, Nology plug wires, header with open 2.5" exhaust and ractive muffler, and of course 125 shot Zex system with bottle heater electric bottle opener and purge valve, all autometer carbon fiber gauges, (Dash is completely custom in the gauge cluseter area), alpine deck with 6 disc changer, orion 32 band digital eq, 5 Linear power amplifiers, 2 alpine digital crossovers, 1 JL w5 12" woofer fiberglassed into the spare tire hole, q-form kick panels with 5 1/4 and tweeters, fiberglassed door panels and rear panels, alpine security system, also ground control coilovers, 17" Konig wheels with nitto tires, ractive rear strut tower brace, cross drilled and slotted roters on all 4 corners, GTR rear spoiler, 2 Sets of neons, and clear bumper and corner lights. I cant take credit for building this car it belonged to another mx-3er who built the whole thing and if you would like to see it being built go to Woodyscustomcreations.com

1/4 mile times 13.46 at 103
lakersfan1
Senior Member
Posts: 3825
Joined: June 26th, 2003, 2:01 am
Location: Puyallup, WA

Re: A TON OF STUFF STILL FOR SALE. List getting smaller( SUP

Post by lakersfan1 »

How old are those parts? Are any new or mostly new? How old are the cats?
tonguefreek
Regular Member
Posts: 310
Joined: February 14th, 2003, 2:01 am
Location: berwick .maine

Re: A TON OF STUFF STILL FOR SALE. List getting smaller( SUP

Post by tonguefreek »

how much for the intake manifold set up shipped to maine 03906 the k8 1

<small>[ December 19, 2003, 08:45 PM: Message edited by: tonguefreek ]</small>
User avatar
steven
Regular Member
Posts: 261
Joined: February 8th, 2003, 2:01 am
Location: hawaii

Re: A TON OF STUFF STILL FOR SALE. List getting smaller( SUP

Post by steven »

hey i wanna see pics of ur exhaust pics or all of the piping you have.
stevenuishere@hotmail.com
curve
Regular Member
Posts: 186
Joined: December 12th, 2001, 2:01 am
Location: Louisiana
Contact:

Re: A TON OF STUFF STILL FOR SALE. List getting smaller( SUP

Post by curve »

ttt
93 KLZED Mx-3 with MSD ignition, LSD tranny, clutchmasters stage 3 clutch, short throw shifter, underdrive pulleys, Nology plug wires, header with open 2.5" exhaust and ractive muffler, and of course 125 shot Zex system with bottle heater electric bottle opener and purge valve, all autometer carbon fiber gauges, (Dash is completely custom in the gauge cluseter area), alpine deck with 6 disc changer, orion 32 band digital eq, 5 Linear power amplifiers, 2 alpine digital crossovers, 1 JL w5 12" woofer fiberglassed into the spare tire hole, q-form kick panels with 5 1/4 and tweeters, fiberglassed door panels and rear panels, alpine security system, also ground control coilovers, 17" Konig wheels with nitto tires, ractive rear strut tower brace, cross drilled and slotted roters on all 4 corners, GTR rear spoiler, 2 Sets of neons, and clear bumper and corner lights. I cant take credit for building this car it belonged to another mx-3er who built the whole thing and if you would like to see it being built go to Woodyscustomcreations.com

1/4 mile times 13.46 at 103
User avatar
mx3TT
Supporting Member
Posts: 1144
Joined: June 22nd, 2003, 2:01 am
Location: NY
Contact:

Re: A TON OF STUFF STILL FOR SALE. List getting smaller( SUP

Post by mx3TT »

Do you have the top piece of the dash that goes around the two middle vents?
Chris

Image
MY MX-3 PICTURES
MX-3.com's online store - SUPPORT MX-3.COM
Justin Evans
Regular Member
Posts: 247
Joined: August 15th, 2001, 2:01 am
Location: Fort Campbell KY

Re: A TON OF STUFF STILL FOR SALE. List getting smaller( SUP

Post by Justin Evans »

How much of the AC do you still have?
Is it off the V6?
Quartermaster92Y@hotmail.com
Image
***DRIVE IT LIKE YOU STOLE IT!!!!!***
Postman2K
Regular Member
Posts: 759
Joined: December 12th, 2000, 2:01 am
Location: Ottawa, Ontario, Canada

Re: A TON OF STUFF STILL FOR SALE. List getting smaller( SUP

Post by Postman2K »

Originally posted by curve:
Here is all the parts that I have left from my mx-3 that was purchased by another one of mx-3.com users. If you have any questions on any of these parts feel free to email me at curve10780@aol.com and I will get back to you as fast as I can. Oh yeah the car was a 93 gs Blaze red in color and a 1.8 in it.
Well here goes the stuff for sale:

--Driver and passenger side windows
--Front crossbrace support
--Bumper rebar
--Hood latch
--Both electric fans
--Driver side front fender
--Windsheild wiper motor
--Hood hinges
--Seat belt control module
--Air Conditioner blower motor and fan
--Rear seatbelt assemblies
--Power mirrors (need paint)
--Power mirror control switch
--Stock tail lights (2 sets)
--Cruise control switch(out of dash piece)
--Hazard lights and rear defrost switch
--Air conditioner controls

I ALSO HAVE THE FOLLOWING PLASTIC PIECES:

--Glovebox Without latch
--Big plastic piece around radio and ac controls
--big plastic piece under the steering column
--Also the actual steering column cover
--aroung the gauge bezel
--all the air vent (except the passenger side)
--Plastic behind door handles

Here is a list of spare parts that I also will sell.

--1 set of 18 inch maxxum wheels with nitto nt555 rubber.
--1 set of stock suspension springs
--2 spare 15 inch factory wheels
--3 sets of exhaust manifolds
--2 y-pipes
--2 K8 cats
--K8 Engine block with cranck, rods, and pistons
--KL03 complete engine (its missing belt tensioners, a/c compressor, and needs a new timming belt cover.)
--K8 complete set of heads
--K8 water pump
--K8 complete intake manifold with throttle body and fuel rails
--2 Klo3 complete intake manifolds with fuel rails and throttle body.
--K8 cams
--K8 cam pulleys (2 sets)
--LOTS MORE, JUST ASK FOR WHAT YOU NEED AND I MAY HAVE IT.

THERS ARE A FEW OTHER PIECES THAT IM NOT SURE WHERE THEY GO SO EMAIL ME WITH WHAT YOU NEED AND I PROBABLY GOT IT.

Im leting these parts go for the best price so email me with what you want and we will get it going.

PLease email me with request for a part

<a href="mailto:curve10780@aol.com" target="_blank">curve10780@aol.com</a>
u still have "bumper rebar"? what year/model is our car? email me with answer

PostmanProductions@excite.com
2007 Mazda3 GT Hatchback (Phantom Blue Mica) - DAILY DRIVER
2004 Mazda3 GT Hatchback (Passion Lava Orange) - FOR SALE
1994 Mazda Mx-3 GS (Laguna Blue) - RETIRED/JUNKED
1995 Mazda Mx-3 RS (Dark blue) - SOLD
curve
Regular Member
Posts: 186
Joined: December 12th, 2001, 2:01 am
Location: Louisiana
Contact:

Re: A TON OF STUFF STILL FOR SALE. List getting smaller( SUP

Post by curve »

PLEASE EMAIL ME WITH ANY QUESTIONS OR ANY REQUEST
93 KLZED Mx-3 with MSD ignition, LSD tranny, clutchmasters stage 3 clutch, short throw shifter, underdrive pulleys, Nology plug wires, header with open 2.5" exhaust and ractive muffler, and of course 125 shot Zex system with bottle heater electric bottle opener and purge valve, all autometer carbon fiber gauges, (Dash is completely custom in the gauge cluseter area), alpine deck with 6 disc changer, orion 32 band digital eq, 5 Linear power amplifiers, 2 alpine digital crossovers, 1 JL w5 12" woofer fiberglassed into the spare tire hole, q-form kick panels with 5 1/4 and tweeters, fiberglassed door panels and rear panels, alpine security system, also ground control coilovers, 17" Konig wheels with nitto tires, ractive rear strut tower brace, cross drilled and slotted roters on all 4 corners, GTR rear spoiler, 2 Sets of neons, and clear bumper and corner lights. I cant take credit for building this car it belonged to another mx-3er who built the whole thing and if you would like to see it being built go to Woodyscustomcreations.com

1/4 mile times 13.46 at 103
curve
Regular Member
Posts: 186
Joined: December 12th, 2001, 2:01 am
Location: Louisiana
Contact:

Re: A TON OF STUFF STILL FOR SALE. List getting smaller( SUP

Post by curve »

C'MON SOMEONE HAS TO WANT SOME OF THIS CRAP. ALL I WANT IS BEST OFFER I HAVE WAY TO MAY PARTS JUST LAYIN AROUND.
93 KLZED Mx-3 with MSD ignition, LSD tranny, clutchmasters stage 3 clutch, short throw shifter, underdrive pulleys, Nology plug wires, header with open 2.5" exhaust and ractive muffler, and of course 125 shot Zex system with bottle heater electric bottle opener and purge valve, all autometer carbon fiber gauges, (Dash is completely custom in the gauge cluseter area), alpine deck with 6 disc changer, orion 32 band digital eq, 5 Linear power amplifiers, 2 alpine digital crossovers, 1 JL w5 12" woofer fiberglassed into the spare tire hole, q-form kick panels with 5 1/4 and tweeters, fiberglassed door panels and rear panels, alpine security system, also ground control coilovers, 17" Konig wheels with nitto tires, ractive rear strut tower brace, cross drilled and slotted roters on all 4 corners, GTR rear spoiler, 2 Sets of neons, and clear bumper and corner lights. I cant take credit for building this car it belonged to another mx-3er who built the whole thing and if you would like to see it being built go to Woodyscustomcreations.com

1/4 mile times 13.46 at 103
curve
Regular Member
Posts: 186
Joined: December 12th, 2001, 2:01 am
Location: Louisiana
Contact:

Re: A TON OF STUFF STILL FOR SALE. List getting smaller( SUP

Post by curve »

TTT
93 KLZED Mx-3 with MSD ignition, LSD tranny, clutchmasters stage 3 clutch, short throw shifter, underdrive pulleys, Nology plug wires, header with open 2.5" exhaust and ractive muffler, and of course 125 shot Zex system with bottle heater electric bottle opener and purge valve, all autometer carbon fiber gauges, (Dash is completely custom in the gauge cluseter area), alpine deck with 6 disc changer, orion 32 band digital eq, 5 Linear power amplifiers, 2 alpine digital crossovers, 1 JL w5 12" woofer fiberglassed into the spare tire hole, q-form kick panels with 5 1/4 and tweeters, fiberglassed door panels and rear panels, alpine security system, also ground control coilovers, 17" Konig wheels with nitto tires, ractive rear strut tower brace, cross drilled and slotted roters on all 4 corners, GTR rear spoiler, 2 Sets of neons, and clear bumper and corner lights. I cant take credit for building this car it belonged to another mx-3er who built the whole thing and if you would like to see it being built go to Woodyscustomcreations.com

1/4 mile times 13.46 at 103
User avatar
masonholmes
Supporting Member
Posts: 279
Joined: November 26th, 2000, 2:01 am
Location: Beverly WV, USA
Contact:

Re: A TON OF STUFF STILL FOR SALE. List getting smaller( SUP

Post by masonholmes »

I'm interested in the cruise control switch and bumper rebar. (if this is the small lip spoiler that is on the GS) little question, does the light on the cruise control button still light up? my bulb has burned out and they seem hard to come by - that is why I'm interested in your switch set.
Thanks,
1993 MX-3 ~ SE * 2.5L Swap'd
1993 RX-7 ~ Rotary Performance Built
1996 MX-5 ~ M-Edition * Topless, Daily Driver


masonholmes@hotmail.com
curve
Regular Member
Posts: 186
Joined: December 12th, 2001, 2:01 am
Location: Louisiana
Contact:

Re: A TON OF STUFF STILL FOR SALE. List getting smaller( SUP

Post by curve »

ttt
93 KLZED Mx-3 with MSD ignition, LSD tranny, clutchmasters stage 3 clutch, short throw shifter, underdrive pulleys, Nology plug wires, header with open 2.5" exhaust and ractive muffler, and of course 125 shot Zex system with bottle heater electric bottle opener and purge valve, all autometer carbon fiber gauges, (Dash is completely custom in the gauge cluseter area), alpine deck with 6 disc changer, orion 32 band digital eq, 5 Linear power amplifiers, 2 alpine digital crossovers, 1 JL w5 12" woofer fiberglassed into the spare tire hole, q-form kick panels with 5 1/4 and tweeters, fiberglassed door panels and rear panels, alpine security system, also ground control coilovers, 17" Konig wheels with nitto tires, ractive rear strut tower brace, cross drilled and slotted roters on all 4 corners, GTR rear spoiler, 2 Sets of neons, and clear bumper and corner lights. I cant take credit for building this car it belonged to another mx-3er who built the whole thing and if you would like to see it being built go to Woodyscustomcreations.com

1/4 mile times 13.46 at 103
User avatar
Zoso124
Forum Moderator
Posts: 1100
Joined: November 7th, 2000, 2:01 am
antispam: No
Location: Sterling, VA

Re: A TON OF STUFF STILL FOR SALE. List getting smaller( SUP

Post by Zoso124 »

Any chance of still having the engine wiring harnass?
Mike Evans
Gone:
92 GS Tropical Emerald MTX 2.5L
93 GS Raspberry Metallic SE MTX 1.8L
Post Reply

Return to “MX-3 Related Items For Sale/Trade”