WTB : Need Kl Ze Pistons & Klze Heads & Fidanza

[Street-Import]

Hi guys, I am currently rebuilding my engine,
I need :
-Fidanza Flywheel
-ACT II Clutch kit
-Pheno spacers for ZE
-ZE ECU
-8.5mm or + Spark Plug cables
-New ZE Oil & Water pump

Thanks alot for your help

<small>[ December 19, 2003, 12:29 PM: Message edited by: Pat ]</small>

[aaronthehic]

which head do you call left, if it is looking from the drive belts i have the left head, and i have ze pistons too

aaronthehic@hotmail.com

[Street-Import]

If you are looking from the belts side (front) its the right head.

Please tell me you got that one too
How much for the pistons?
I only need 1

let me know
thanks

[aaronthehic]

the right bank is damaged.

one piston for 40$ becuase i will have to spend a day pulling the motor and spripping it for 1 piston

were u looking for ze cams on probetalk

<small>[ November 12, 2003, 12:32 PM: Message edited by: aaron the hic ]</small>

[Street-Import]

Hi, do you have any pics of the damaged of the right head?

Would you be able to sell me 2 pistons for 50$CDN + shipping?

Its not gonna take you longer to take out a 2nd one. And its better for me in case your piston shape isnt perfect, at least I have 2 to choose from.

Are they in great shape? Still usable? let me know, I will paypal you that right now. It should cost about 10$CDN to ship both to Gatineau, qc.

thanks

[timpronk]

these people will sell you a ze ecu for 250.00 cdn + taxes + shipping

http://www.tigerjapanese.com/

[Street-Import]

Aaron I need your pistons
please get back to me ASAP

thanks
elektromaniak@hotmail.com

I already pm you on every forum and emailed you...

[aaronthehic]

i know when i look down the intake port all i can see is peices of piston....

but the back bank and pistons will all be fine

i will do a tear down and let you know (be a few weeks)

were you looking for ze cams also?

<small>[ November 12, 2003, 03:53 PM: Message edited by: aaron the hic ]</small>

[Street-Import]

ok, it doesnt take long to remove... 1 or 2 hours max and your whole engine will be apart. Thats what it took me starting from the full engine...

I would take 2 of your pistons with the connection rod/shaft. I really need them asap.

Sorry for the cams I already found cheap KL03 ones. I only needed them for a regrind so its perfect and came cheaper for me.

Let me know for the pistons, thanks alot

[Spydie]

Originally posted by aaron the hic:
which head do you call left, if it is looking from the drive belts i have the left head, and i have ze pistons too

aaronthehic@hotmail.com

for future reference, left and right is determined by looking from the tranny side.
Therefor the front is left and back is right. in other words the one you have is actually the right head.

[aaronthehic]

[Street-Import]

ok just found the pistons I needed. Should have them by next week. Thanks anyway...

[mrspanky79]

Pat just wondering are you sure that the heads are from a klze? The ports look to round to me, i could be wrong but ze ports are square.

[Spydie]

they are square....the rounded ones in the pic are the exhaust ports

[white fish]

Hey
I have a ACT II Extreme Disk and PP and a 13lbs shaved Mx-3 Flywheel for sale
PM if your interested