turbo oil and water lines for B6

[RS_OBD'oh_2]

Sorry to be a double poster punk.. but the original post should have been in FI.

Hey, looking to see if anyone knows the size of the oil pressure hole/threads on the B6 head between the disty and the TB.

I've tried 10mm and 1/8... I figure it should be metric. The hex plug (currently filling the hole in the head) seems to screw into the 10mm and 1/8 but the threads dont match with the hole. - if that makes any sense.
I'm guessing it's going to be 8 or 9mm... but confirmation would be great. Thanx.

On a side note.. if anyone has pics of the water lines to turbo (from the t-body or anything else would be a big help too) - I figure I'll have to cut the lines and just place a "T" in.

[RS_OBD'oh_2]

my eyes hurt from reading so many old posts...

Not sure if this is it... Will keep reading.

ModMX3 - (Carmaster2005) wrote:
thanks ! i will find it and use the one next to the head.

It is a weird thread. I think BSP which is british pipe thread. its 1/8 bsp i think....

[RS_OBD'oh_2]

It looks like this is what I need. Trying for attempt # 3

http://www.pegasusautoracing.com/produc ... RecID=3142" onclick="window.open(this.href);return false;

[RS_OBD'oh_2]

this is the correct fitting.
It seems really snug, but I believe it's due to the thread sealant left in from the hex plug. A couple light turns with a wrench and she fits like a glove. - and ribbed for her pleasure