Here is all the parts that I have left from my mx-3 that was purchased by another one of mx-3.com users. If you have any questions on any of these parts feel free to email me at curve10780@aol.com and I will get back to you as fast as I can. Oh yeah the car was a 93 gs Blaze red in color and a 1.8 in it.
Well here goes the stuff for sale:<p>--Front and rear seats
--Driver and passenger side windows
--Front crossbrace support
--Bumper rebar
--Hood latch
--Radiator
--Both electric fans
--Driver side front fender (DEAL PENDING)
--Windsheild wiper motor
--Hood hinges
--Stock radio
--Seat belt control module
--Air Conditioner blower motor and fan
--Front seat belts(inside center console)
--Rear seatbelt assemblies
--I have all the seats
--Power mirrors (need paint)
--Power mirror control switch
--Stock tail lights
--NGK PLUG WIRES (BLUE)---(DEAL PENDING)
--Cruise control switch(out of dash piece)
--Hazard lights and rear defrost switch
--Air conditioner controls
--GAUGE CLUSTER(147052 MILES ON IT)<p>I ALSO HAVE THE FOLLOWING PLASTIC PIECES:<p>--Glovebox
--Big plastic piece around radio and ac controls(DEAL PENDING)
--big plastic piece under the steering column
--Also the actual steering column cover
--aroung the gauge bezel
--all the air vent
--Plastic behind door handles<p>THERS ARE A FEW OTHER PIECES THAT IM NOT SURE WHERE THEY GO SO EMAIL ME WITH WHAT YOU NEED AND I PROBABLY GOT IT.<p>Im leting these parts go for the best price so email me with what you want and we will get it going. <p> curve10780@aol.com<p>[ September 20, 2003: Message edited by: curve ]</p>
here what I have left FOR SALE
here what I have left FOR SALE
93 KLZED Mx-3 with MSD ignition, LSD tranny, clutchmasters stage 3 clutch, short throw shifter, underdrive pulleys, Nology plug wires, header with open 2.5" exhaust and ractive muffler, and of course 125 shot Zex system with bottle heater electric bottle opener and purge valve, all autometer carbon fiber gauges, (Dash is completely custom in the gauge cluseter area), alpine deck with 6 disc changer, orion 32 band digital eq, 5 Linear power amplifiers, 2 alpine digital crossovers, 1 JL w5 12" woofer fiberglassed into the spare tire hole, q-form kick panels with 5 1/4 and tweeters, fiberglassed door panels and rear panels, alpine security system, also ground control coilovers, 17" Konig wheels with nitto tires, ractive rear strut tower brace, cross drilled and slotted roters on all 4 corners, GTR rear spoiler, 2 Sets of neons, and clear bumper and corner lights. I cant take credit for building this car it belonged to another mx-3er who built the whole thing and if you would like to see it being built go to Woodyscustomcreations.com
1/4 mile times 13.46 at 103
1/4 mile times 13.46 at 103
Re: here what I have left FOR SALE
I need the driver's side fender and the tail lights, tell me how much u want 4 them and the amount for shipping to calgary, canada.
Ichardray@hotmail.com
Ichardray@hotmail.com
Re: here what I have left FOR SALE
how much for the plastci around teh controls and ac vents? email me
92 red rs
performance exhaust
zx2 struts and Eibach springs
turboed + stand alone when the cash is there
Re: here what I have left FOR SALE
How much for the cruise control switches including shipping(Peace River, Alberta)
Re: here what I have left FOR SALE
TTT
93 KLZED Mx-3 with MSD ignition, LSD tranny, clutchmasters stage 3 clutch, short throw shifter, underdrive pulleys, Nology plug wires, header with open 2.5" exhaust and ractive muffler, and of course 125 shot Zex system with bottle heater electric bottle opener and purge valve, all autometer carbon fiber gauges, (Dash is completely custom in the gauge cluseter area), alpine deck with 6 disc changer, orion 32 band digital eq, 5 Linear power amplifiers, 2 alpine digital crossovers, 1 JL w5 12" woofer fiberglassed into the spare tire hole, q-form kick panels with 5 1/4 and tweeters, fiberglassed door panels and rear panels, alpine security system, also ground control coilovers, 17" Konig wheels with nitto tires, ractive rear strut tower brace, cross drilled and slotted roters on all 4 corners, GTR rear spoiler, 2 Sets of neons, and clear bumper and corner lights. I cant take credit for building this car it belonged to another mx-3er who built the whole thing and if you would like to see it being built go to Woodyscustomcreations.com
1/4 mile times 13.46 at 103
1/4 mile times 13.46 at 103
-
koreanmx-er
- Regular Member
- Posts: 369
- Joined: September 16th, 2002, 2:01 am
- Location: minnesota
Re: here what I have left FOR SALE
i'll take the radiator if you can send me pics of it to a diff email address lewiafrancis@aol.com if i get pics of it i might buy
sold the mx-3 , bought 04 gtp comp g , from the smallest v6 to one of the biggest 3800 s/c FTW
Re: here what I have left FOR SALE
Check your mail. I'm interested in the passenger rear view mirror.<p>later,
Jose
Jose
-
cjthor
- Forum Moderator
- Posts: 5018
- Joined: November 26th, 2000, 2:01 am
- Location: Portland Oregon
- Contact:
Re: here what I have left FOR SALE
how much for the hood hinges
Jarid Perry
94 mx3 Turrrbooooo (not even close to stock) 302WHP
71 Chevy C20 (tow rig!!)
77 Jeep CJ5 (no way its stock)
06 MINI Cooper S JCW GP (few goodies) 210WHP
2008 MINI Cooper Clubman S
94 mx3 Turrrbooooo (not even close to stock) 302WHP
71 Chevy C20 (tow rig!!)
77 Jeep CJ5 (no way its stock)
06 MINI Cooper S JCW GP (few goodies) 210WHP
2008 MINI Cooper Clubman S
Re: here what I have left FOR SALE
Everyone please just email me with an offer and the part that you need. Im working of offers only b/c I have no clue what most of this is worth.
93 KLZED Mx-3 with MSD ignition, LSD tranny, clutchmasters stage 3 clutch, short throw shifter, underdrive pulleys, Nology plug wires, header with open 2.5" exhaust and ractive muffler, and of course 125 shot Zex system with bottle heater electric bottle opener and purge valve, all autometer carbon fiber gauges, (Dash is completely custom in the gauge cluseter area), alpine deck with 6 disc changer, orion 32 band digital eq, 5 Linear power amplifiers, 2 alpine digital crossovers, 1 JL w5 12" woofer fiberglassed into the spare tire hole, q-form kick panels with 5 1/4 and tweeters, fiberglassed door panels and rear panels, alpine security system, also ground control coilovers, 17" Konig wheels with nitto tires, ractive rear strut tower brace, cross drilled and slotted roters on all 4 corners, GTR rear spoiler, 2 Sets of neons, and clear bumper and corner lights. I cant take credit for building this car it belonged to another mx-3er who built the whole thing and if you would like to see it being built go to Woodyscustomcreations.com
1/4 mile times 13.46 at 103
1/4 mile times 13.46 at 103
Re: here what I have left FOR SALE
TTT
93 KLZED Mx-3 with MSD ignition, LSD tranny, clutchmasters stage 3 clutch, short throw shifter, underdrive pulleys, Nology plug wires, header with open 2.5" exhaust and ractive muffler, and of course 125 shot Zex system with bottle heater electric bottle opener and purge valve, all autometer carbon fiber gauges, (Dash is completely custom in the gauge cluseter area), alpine deck with 6 disc changer, orion 32 band digital eq, 5 Linear power amplifiers, 2 alpine digital crossovers, 1 JL w5 12" woofer fiberglassed into the spare tire hole, q-form kick panels with 5 1/4 and tweeters, fiberglassed door panels and rear panels, alpine security system, also ground control coilovers, 17" Konig wheels with nitto tires, ractive rear strut tower brace, cross drilled and slotted roters on all 4 corners, GTR rear spoiler, 2 Sets of neons, and clear bumper and corner lights. I cant take credit for building this car it belonged to another mx-3er who built the whole thing and if you would like to see it being built go to Woodyscustomcreations.com
1/4 mile times 13.46 at 103
1/4 mile times 13.46 at 103