A/C installation

[Micv]

Hi, i'm in progress of installing an A/C system in my '94 mx-3 GS. I'm having some problems with the wiring. I have a connector i can't find the right place for. I have a white 6 pin connector on the car near the A/C relais which i would suspect would hook up to the A/C wiring, but no it's only 3/4 pin (Only 3 actual pins, but place for 4). Could someone please take some closeup pictures of the wiring near the A/C relais. And also the actual relais, so i can se how it's mounted.

[Micv]

I've been looking at some pictures in the engine bay thread, and it looks like the 4 pin connector is more common. Does anyone have a 6 pin connector (White connector, near the firewall, next to the A/C relais) with the wiring connected, that could check how many wires are connected and to which pins.

[Micv]

This is the connector i'm confused about. My A/C wiring harness have 4 sockets for relays(K8), but only a 4 pin connector(B6) according to this diagram. I have 2 wiring harness' now and they are both this way. (On has a different connector for the pressure switch).


I simply doesn't understand this! Please help me