[WTB] Muffler for 94 4 cyl
[WTB] Muffler for 94 4 cyl
I need a <cheap> rear muffler for the 94 4cyl - mine is gone and i need something temporary till spring....

Re: [WTB] Muffler for 94 4 cyl
I used a 2 inch thrush turbo (20 bucks at advance)
clamps and fittings
a single thick wire to hold the end
I had to put it in an angle but this is what you get for 27 bucks

clamps and fittings
a single thick wire to hold the end
I had to put it in an angle but this is what you get for 27 bucks

-
- Regular Member
- Posts: 77
- Joined: July 30th, 2008, 1:08 pm
- Location: Huntsville Ont.
- Contact:
Re: [WTB] Muffler for 94 4 cyl
We build all sorts of performance mufflers and I'm sure I could get you one for around $75.00. No tax, and shipping would be around $25.00 They're all high flow stainless steel. Check out MBRP performance exhaust at http://www.mbrp.com" onclick="window.open(this.href);return false;. There are single in single out, single in dual out, and a variety of different tip styles. All the muffers are round with different daimeter tips.
Let me know if you're interested.
Let me know if you're interested.
'94 GS 5 speed-JDM K8, headers/custom exhaust, CAI, Tokico struts, Eibach Pro Kit, Moog strut mounts, custom solid engine mounts...
'96 GS 5 Speed air filter, KYB's
'94 GS 5 Speed OEM
'96 GS 5 Speed air filter, KYB's
'94 GS 5 Speed OEM
- fowljesse
- Supporting Member
- Posts: 5676
- Joined: March 17th, 2006, 2:59 pm
- Location: portland, OR
- Contact:
Re: [WTB] Muffler for 94 4 cyl
There's one left over from the RS parts car in great shape. It would cost a bit to ship, though.
'93 GS - P&P DE w/ ZE exh. cams/ pistns, KLG4 IM, 65mm TB, MSnS, Phenos, K&N RAI, UDP, Grnd wires, rear batt, filld MM, torq strt, TWM short shftr, Exedy, Lng tube hdrs 2.5" Side exhaust, H&R sprngs, Poly bushngs, strutbars, Alum. crss mmber&tiebar, 22mm swybar, solid links, Direzzas, leather int, Alpine 9805 stereo & alrm, keyless entry, 10 Boston Accoustics spkrs, Prjectrs, Blaster2, CF hood, FG hatch, Lexan
Re: [WTB] Muffler for 94 4 cyl
Thanks for the advice - I cannot use it because my over-the-axle pipe is rusted to hell - so if i clamp on it - it will crumble i think.94redmx3 wrote:I used a 2 inch thrush turbo (20 bucks at advance)
clamps and fittings
a single thick wire to hold the end
I had to put it in an angle but this is what you get for 27 bucks

Re: [WTB] Muffler for 94 4 cyl
Thanks for the offer but i am not interested.Steve J-SPEC wrote:We build all sorts of performance mufflers and I'm sure I could get you one for around $75.00. No tax, and shipping would be around $25.00 They're all high flow stainless steel. Check out MBRP performance exhaust at http://www.mbrp.com" onclick="window.open(this.href);return false;. There are single in single out, single in dual out, and a variety of different tip styles. All the muffers are round with different daimeter tips.
Let me know if you're interested.

- fowljesse
- Supporting Member
- Posts: 5676
- Joined: March 17th, 2006, 2:59 pm
- Location: portland, OR
- Contact:
Re: [WTB] Muffler for 94 4 cyl
How about $25 for a good OEM one?
'93 GS - P&P DE w/ ZE exh. cams/ pistns, KLG4 IM, 65mm TB, MSnS, Phenos, K&N RAI, UDP, Grnd wires, rear batt, filld MM, torq strt, TWM short shftr, Exedy, Lng tube hdrs 2.5" Side exhaust, H&R sprngs, Poly bushngs, strutbars, Alum. crss mmber&tiebar, 22mm swybar, solid links, Direzzas, leather int, Alpine 9805 stereo & alrm, keyless entry, 10 Boston Accoustics spkrs, Prjectrs, Blaster2, CF hood, FG hatch, Lexan
Re: [WTB] Muffler for 94 4 cyl
fowljesse wrote:There's one left over from the RS parts car in great shape. It would cost a bit to ship, though.
Hey thanks - is there any way to find out how much it would cost to ship.... It might even be possible to just wrap it in cardboard and use the cheapest USPS option......fowljesse wrote:How about $25 for a good OEM one?

- fowljesse
- Supporting Member
- Posts: 5676
- Joined: March 17th, 2006, 2:59 pm
- Location: portland, OR
- Contact:
Re: [WTB] Muffler for 94 4 cyl
Yeah. I'll grab it on Sunday, and take it to the P.O.
'93 GS - P&P DE w/ ZE exh. cams/ pistns, KLG4 IM, 65mm TB, MSnS, Phenos, K&N RAI, UDP, Grnd wires, rear batt, filld MM, torq strt, TWM short shftr, Exedy, Lng tube hdrs 2.5" Side exhaust, H&R sprngs, Poly bushngs, strutbars, Alum. crss mmber&tiebar, 22mm swybar, solid links, Direzzas, leather int, Alpine 9805 stereo & alrm, keyless entry, 10 Boston Accoustics spkrs, Prjectrs, Blaster2, CF hood, FG hatch, Lexan