I put them in the oven to loosen up the glue, and got on here to see how long, and what temp... and I started to smell burning
The outer cover, that he painted all red, was melting! So I tore it off, and had this:
Then I put shelf paper over it to make a rough template
The turn signal covers had melted, so I popped them out, and made new ones out of a sample piece of smoked Lexan that was too light for visors.
The reflective part behind the turn signals were faded badly, so I covered them with Aluminum tape
I stuck the template to a piece of plastic leftover from my wheel skirts, and cut it out. Then I trimmed it down to fit over the lights. This took the longest. Then I screwed them in place. I will now use Duraglas (a stronger bondo) to smooth everything out.
I need opinions as per the poll!
I'll put up pics when they're done.
