Solo_ryder - 1993 MX-3 GS - Update! Random snow shots!

In this section, Users can post worklogs for their vehicle and show users their projects. (MX-3 ONLY!). Please create only ONE topic when starting a project, and DO NOT create 2 worklogs for the same vehicle, even though they are different projects. READ THE STICKY!
Post Reply
User avatar
solo_ryder
Senior Member
Posts: 6289
Joined: October 16th, 2004, 2:01 am
Location: British Columbia

Post by solo_ryder »

Update - Got some new parts, still waiting to install some of them.

Got some black altezzas, I think they suit the car and update the back abit more:

Image

I also have a new Cosmo racing lightweight UDP and some JDM front signal lights in which I will be wiring up the DRL to as they have inside lights. Also installed some MTX 5205 thunderdome coaxials in the rear of the car.
Top
User avatar
solo_ryder
Senior Member
Posts: 6289
Joined: October 16th, 2004, 2:01 am
Location: British Columbia

Post by solo_ryder »

Installed my JDM signal lights. Baked them up and swap lenses with my stock housings. They use a 921 bulb for the inside section so I ordered some 921 5 bulb LED's off eBay to make em look abit better. The light is not powerful at all haha, the bulb acctually puts out more light then the LED, but since the LED's are so directional they look bright from this angle, they look killer when i am driving and no mroe ugly yellow light from the headlights when driving now.

Image
Top
User avatar
Ukrman
Regular Member
Posts: 571
Joined: December 30th, 2005, 10:47 am
Location: NJ
Contact:
Contact Ukrman

Post by Ukrman »

sweet ride, keep it up
92 Mazda MX3 GS

http://www.cardomain.com/id/ukrman" onclick="window.open(this.href);return false; - cardomain page
viewtopic.php?f=46&t=66481 - worklog
viewtopic.php?f=37&t=72099 - feedback
viewtopic.php?f=2&t=71757 - stuff for sale
http://s2.metaldamage.com/c.php?uid=159229" onclick="window.open(this.href);return false; - biggest waste of time

Image
Top
User avatar
TREVO123
Regular Member
Posts: 654
Joined: November 29th, 2005, 8:57 pm
Location: BC, CANADA
Contact:
Contact TREVO123

Post by TREVO123 »

Looks wicked Jordan, That car is clean! loving it.
TREVO-Under major construction, Bp coming soon! TO a mx3 near you
1993 MX-3 RS,FULL BLITZ KIT(PROTOTYPE)17"10 SPOKE RIMS,SOHC 1.6L.
http://www.cardomain.com/ride/2189811
Top
User avatar
solo_ryder
Senior Member
Posts: 6289
Joined: October 16th, 2004, 2:01 am
Location: British Columbia

Post by solo_ryder »

Guess I haven't posted in some time. I am in the process of buying a winter beater. Next week (weekend of Nov 2nd) I am parking the MX for the winter and pulling the motor. I have a room in my house that I am storing hte motor on a stand and I am gonna be working on it. I have started ordering some parts already for my little build. So far I have a bunch of random crap:

Rear strut bar
Cosmo UDP
7 nipple disty
SRD battery tie down
Pheno spacers for IM and TB
MX3 Dual gauge pod
6000k HID kit (installed)
Eunos skirts
Authentic Mazdaspeed oil cap
New timing belt and tensioner

Here are some pics of the HID kit:

Image
Image

MTX FTW ahah, my new amp (tc4001):

Image
Last edited by solo_ryder on December 17th, 2007, 10:17 pm, edited 1 time in total.
Top
User avatar
Kirk95gs
Supporting Member
Posts: 820
Joined: July 21st, 2006, 10:02 am
Location: Nova Scotia/New Bunswick
Contact:
Contact Kirk95gs

Post by Kirk95gs »

Your list of stuff looks like my list of stuff..

almost to the "T"

Should be fun all when its done!!!
Top
User avatar
solo_ryder
Senior Member
Posts: 6289
Joined: October 16th, 2004, 2:01 am
Location: British Columbia

Post by solo_ryder »

Here is some of my new crap:

Image

My work area full of stuff like my 7 nipple disty:

Image

My gauge pod and my recently painted pillar:

Image

:(

Image

Need to preplace my tensioner!

Image

I said I would not be using these heads next season. However, plans change, I have no issues with these heads anymore and they are perfect for my application. Motor has over 70k on it now I believe. All I can say is Amsoil FTW.

Image
Last edited by solo_ryder on December 17th, 2007, 10:21 pm, edited 1 time in total.
Top
User avatar
mx3autozam
Senior Member
Posts: 2950
Joined: September 24th, 2005, 9:09 pm
Location: Kitchener

Post by mx3autozam »

Hey Jordan looks good. Its always nice tos ee parts piled up awaiting installation. Why do you have a new gauge cluster and also from an RS??

I see in the one pic I can see a flywheel. You know you keep telling me on msn ya wanna make the car quick. ver thought about getting a Fidanza. I know there pricey but there pretty damn nice, if you keep your eyes open they come up used quite often.
Top
User avatar
solo_ryder
Senior Member
Posts: 6289
Joined: October 16th, 2004, 2:01 am
Location: British Columbia

Post by solo_ryder »

Yea I will check it out. I dont care if teh cluster is from a RS cause i have the gauge overlays anyways, the cluster has 120k on it. Makes me feel better :P
Top
User avatar
solo_ryder
Senior Member
Posts: 6289
Joined: October 16th, 2004, 2:01 am
Location: British Columbia

Post by solo_ryder »

So just a small update...

I keep running into money issues and havent done much in the way of improvement of my car. I painted my sideskirts (can you believe it!) and basically now am trying to get some money that ppl we me so I can start doing what I have planned for some time...

That however is a surprise for the spring :P You will ALL have to wait and see. I really want my car to come across as a clean, refreshing and original mx-3 that will make people stop and think about what a nice car mazda has actually made.
Top
User avatar
solo_ryder
Senior Member
Posts: 6289
Joined: October 16th, 2004, 2:01 am
Location: British Columbia

Post by solo_ryder »

Christmas update!

I just ordered almost 900$ worth of various parts for the car... Can't tell you all what I got though!
Top
User avatar
TREVO123
Regular Member
Posts: 654
Joined: November 29th, 2005, 8:57 pm
Location: BC, CANADA
Contact:
Contact TREVO123

Re: Solo_ryder - 1993 MX-3 GS

Post by TREVO123 »

Are you just going to swap the ODO over from the RS cluster? Would be easyer id think.
TREVO-Under major construction, Bp coming soon! TO a mx3 near you
1993 MX-3 RS,FULL BLITZ KIT(PROTOTYPE)17"10 SPOKE RIMS,SOHC 1.6L.
http://www.cardomain.com/ride/2189811
Top
User avatar
solo_ryder
Senior Member
Posts: 6289
Joined: October 16th, 2004, 2:01 am
Location: British Columbia

Re: Solo_ryder - 1993 MX-3 GS

Post by solo_ryder »

Its the same as the GS cluster. The difference is the kilometers.. I am going to swap over the gauge overlays as well... we will see, its an electronic one not cable.
Top
User avatar
solo_ryder
Senior Member
Posts: 6289
Joined: October 16th, 2004, 2:01 am
Location: British Columbia

Re: Solo_ryder - 1993 MX-3 GS

Post by solo_ryder »

I am excited! I am starting to get some parts in the mail now! Hopefully soon I will have all the parts I ordered! Also, I was diggin through some old pics and I found some of my seatlle (I visited tunes67 on this trip too). Enjoy...

Image

Image

Image

Image

Image

Image

I miss driving it!
Top
User avatar
solo_ryder
Senior Member
Posts: 6289
Joined: October 16th, 2004, 2:01 am
Location: British Columbia

Re: Solo_ryder - 1993 MX-3 GS

Post by solo_ryder »

Well. I got most of the parts now for my "little" build.. To bad you all wont see it until its complete haha :P . Here are some pics to make you all happy (I hope, I dont get any comments anymore :cry: ) :

Image

This is all you get/need to see :P
Top
Post Reply

Return to “MX-3 Worklogs”