mxr wiring harness

[datmazdboi]

see i have mx6 and i spice the wire on that harness to wire it to my after market radio then when i got my mx3 i just unhooked the wiring harness out of my that and put it in my mx3 now i have this winding static when i turn radio up loud or if the song has heavy bass
i know it's not know the cd player , could it be the speakers or the wiring

[ScooterBovine]

I can barely tell what you are saying in your post...

But, if I were you, and your MX-3 wiring harness that goes to your old factory stereo is intact, just buy an adapter kit from the store for a few bucks and just plug and play...

[datmazdboi]

i don't think i explained that well it sounded good in my head

[ScooterBovine]

If you are getting static during acceleration or something, it might be a crappy ground wire. I've heard of that problem before. Other than that, I don't know what to tell you.

[Typhoonk]

If you are getting static during acceleration or something, it might be a crappy ground wire. I've heard of that problem before. Other than that, I don't know what to tell you.

I with this guy. Make sure there is a ground wire on the other side of the plug. When I had my car there was no ground wire on the factory side of the plug. I guess it just grounded enough through the antenna. But this won't fly with a new deck. So check your ground.