this one is from a dutch member from us... don't really see what it does in between some weird creations that are shown in the other pics...
Some of the craziest mx-3's I have ever seen!!
-
turbulence23
- Regular Member
- Posts: 156
- Joined: May 19th, 2005, 4:11 pm
- Location: The netherlands ( europe)
Re: Some of the craziest mx-3's I have ever seen!!
this one is from a dutch member from us... don't really see what it does in between some weird creations that are shown in the other pics...
2.5L KLZE engine, CF hood, Postert frontbumper, kmax skirts, custom diffusor..
MY RIDE:
http://www.mazdamx-3.nl/members/member_show.php?id=102
MY RIDE:
http://www.mazdamx-3.nl/members/member_show.php?id=102
-
PWRD_BY_HKS
- Regular Member
- Posts: 696
- Joined: August 11th, 2004, 2:01 am
- Location: El Paso
Re: Some of the craziest mx-3's I have ever seen!!
.man im sorry but i gotta point this out.... incase you didnt notice.... this is the uglyest rear end.... EVER....
look closely.... EW...
this one is nice... but what is it... what head lights... its just the MS bumper right....
look closely.... EW...
this one is nice... but what is it... what head lights... its just the MS bumper right....
jdmx-3 KID OF THE 
VICTORIA RACING
ZE PERFORMANCE IN 915 TX
Kl01-ZE,Kl31 ecu, millenia manifold, ngk plugs, ngk wires, probe tranny/ and clutch (stock), VortecH FMU 12:1, Aeromotive AFPR, Tial .38mm Wastegate w/ 4lbs spring, Walboro 255 pump, AiResearch T4, 3" down pipe, GODSPEED manifold, Spearco Boost Gauges, BF Goodrich G-force drag radials.
14.8 1/4 mile all motor untimed on boost.
VICTORIA RACING
ZE PERFORMANCE IN 915 TX
Kl01-ZE,Kl31 ecu, millenia manifold, ngk plugs, ngk wires, probe tranny/ and clutch (stock), VortecH FMU 12:1, Aeromotive AFPR, Tial .38mm Wastegate w/ 4lbs spring, Walboro 255 pump, AiResearch T4, 3" down pipe, GODSPEED manifold, Spearco Boost Gauges, BF Goodrich G-force drag radials.
14.8 1/4 mile all motor untimed on boost.
-
mrmike420
- Supporting Member
- Posts: 360
- Joined: December 22nd, 2001, 2:01 am
- Location: Phoenix, AZ
- Contact:
Re: Some of the craziest mx-3's I have ever seen!!
That is not a MS bumper but sort of looks like a Skyline headlight conversion...
~FUeGo~
92 MX-3 GS, 5spd, Black Metallic, Tokico ZX2 Struts, Eibach Springs, Sylvania Silverstar Ultra's, K&N A/F, Suzuka S/S Brake Lines, KGS Dual Tip Muffler, Dynamat Extreme Trunk Kit
92 MX-3 GS, 5spd, Black Metallic, Tokico ZX2 Struts, Eibach Springs, Sylvania Silverstar Ultra's, K&N A/F, Suzuka S/S Brake Lines, KGS Dual Tip Muffler, Dynamat Extreme Trunk Kit
-
Hood-R Oliver
- Regular Member
- Posts: 59
- Joined: November 8th, 2006, 1:06 pm
- Location: Kouvola, Finland
Re: Some of the craziest mx-3's I have ever seen!!
Some of them r actually quite nice, then the others r absolutely horrible! Don't really like those headlight conversions, i think a mx-3 should look like a mx-3, keep the basic shapes the same... Maybe re-post but here's one crazy 1, n wit crazy i don't mean ugly. i'd love to c this one ready... 
http://www.cardomain.com/ride/2138901/2" onclick="window.open(this.href);return false;
oh also found this jus' 2 secs ago... looks like a wbk-project?
http://www.cardomain.com/ride/2963517" onclick="window.open(this.href);return false;
http://www.cardomain.com/ride/2138901/2" onclick="window.open(this.href);return false;
oh also found this jus' 2 secs ago... looks like a wbk-project?
http://www.cardomain.com/ride/2963517" onclick="window.open(this.href);return false;
Mx-3 enthusiast since 2004.
-
umcamara
- Supporting Member
- Posts: 1892
- Joined: June 12th, 2007, 3:15 am
- antispam: No
- Location: Winnipeg, Manitoba, Canada
Re: Some of the craziest mx-3's I have ever seen!!
I agree it's the ugliest rear-end ever. Oh...were you talking about the car's?PWRD_BY_HKS wrote:.man im sorry but i gotta point this out.... incase you didnt notice.... this is the uglyest rear end.... EVER....
Re: Some of the craziest mx-3's I have ever seen!!
i hate that rear end makes it look like a el camino or a del sol... atleast those are rwd though... this just looks bad
-
mrmike420
- Supporting Member
- Posts: 360
- Joined: December 22nd, 2001, 2:01 am
- Location: Phoenix, AZ
- Contact:
Re: Some of the craziest mx-3's I have ever seen!!
I believe a Del Sol is FWD... 
~FUeGo~
92 MX-3 GS, 5spd, Black Metallic, Tokico ZX2 Struts, Eibach Springs, Sylvania Silverstar Ultra's, K&N A/F, Suzuka S/S Brake Lines, KGS Dual Tip Muffler, Dynamat Extreme Trunk Kit
92 MX-3 GS, 5spd, Black Metallic, Tokico ZX2 Struts, Eibach Springs, Sylvania Silverstar Ultra's, K&N A/F, Suzuka S/S Brake Lines, KGS Dual Tip Muffler, Dynamat Extreme Trunk Kit
Re: Some of the craziest mx-3's I have ever seen!!
im in the same boat. but all those car do look really good.mrmike420 wrote:They are all creative... but why turn an mx-3 into something else??? IMO, the Mazdaspeed kit, a nice set of rims and a decent paint job is more than enough...
92 Blaze Red MAZDA Mx3 <GS> ZE, millenia manifold. gutted interior, filled mounts, fidanza fw, act 6puck.
Re: Some of the craziest mx-3's I have ever seen!!
omg that chick by the front of the celica mx could beat my a-- dam shes ripped 
http://www.cardomain.com/ride/2433610" onclick="window.open(this.href);return false;
mx-3 Kl Turbo (Weekend/show car)
95 talon tsi awd (Daily Driver For Sale 6,000 or Trade for a Mx
1989 Cbr600 (StreetFighter/Stunt Bike)
1967 Winnebago Motor Home (Pimped out Party Bus a friend and I went in halfs on)
1972 gremlin X Turbo Diesel
, 1999 VR4 Fathers Cars that i end up working on and drving alot
mx-3 Kl Turbo (Weekend/show car)
95 talon tsi awd (Daily Driver For Sale 6,000 or Trade for a Mx
1989 Cbr600 (StreetFighter/Stunt Bike)
1967 Winnebago Motor Home (Pimped out Party Bus a friend and I went in halfs on)
1972 gremlin X Turbo Diesel
, 1999 VR4 Fathers Cars that i end up working on and drving alot-
RS_OBD'oh_2
- Senior Member
- Posts: 2400
- Joined: April 9th, 2007, 1:26 pm
- Location: Calgary, AB
Re: Some of the craziest mx-3's I have ever seen!!
That's a dude... He just likes cut-offs
-
se7en
- Regular Member
- Posts: 1264
- Joined: August 29th, 2007, 1:47 am
- Location: Canada(brrrr, it's cold)
- Contact:
Re: Some of the craziest mx-3's I have ever seen!!
umcamara wrote:I agree it's the ugliest rear-end ever. Oh...were you talking about the car's?PWRD_BY_HKS wrote:.man im sorry but i gotta point this out.... incase you didnt notice.... this is the uglyest rear end.... EVER....
ah, yuk.... I hate it when older women 'pike' up their pants.
It's just gross. I mean, come on, they make quality jeans and sell em cheap nowadays. Get with the program lady. or at least look in the mirror before you go out......yuk. mom bum. yuk.
7
1992 mx-3 GS-T, 10-12psi, T3/t4 hybrid, Turbosmart WG, AFPR, SSAC TURBO pipes, MSD Blaster coil, K&N, AEM W/B, MSnS(full standalone), 225Whp street tuned(10psi), 245Whp (12psi)(300bhp!!!)
1992 Fairlady Z(JDM RHD) 2+2 TT black(done!)700whp+
My Feedback
Don't Click Here! Trust me,Time waster!
1992 Fairlady Z(JDM RHD) 2+2 TT black(done!)700whp+
My Feedback
Don't Click Here! Trust me,Time waster!
-
Mnemonic
- Forum Moderator
- Posts: 3415
- Joined: September 3rd, 2002, 2:01 am
- Location: Eastern Hemisphere
- Contact:
Re:
For the record i thought up of doing this back in 2003 and decided against it, fawker stole my design!!!mr1in6billion wrote:Why didn't he just buy a celica?
crappy photoshop i did back in 2003why couldn't he of stolen the nice design:
08 Infiniti G37s 6speed (The Daily)
Stillen Cold Air Intake, Z1 Plenum Power Mod, Z1 Headers, Z1 Test Pipe, OBX (Ark) Exhaust, Up-Rev Osiris Engine Management (Tuned at Z1), 20x9" 20x10" Str Racing Concave Staggered Rims, SPC Camber kit, Tein H Techs Springs
01 Lexus Is300 (LS2 Project)
93 Mx3 SE 2.5 KLZE (sold it)
93 Mx3 GS 2.0 KFZE (killed it)
Stillen Cold Air Intake, Z1 Plenum Power Mod, Z1 Headers, Z1 Test Pipe, OBX (Ark) Exhaust, Up-Rev Osiris Engine Management (Tuned at Z1), 20x9" 20x10" Str Racing Concave Staggered Rims, SPC Camber kit, Tein H Techs Springs
01 Lexus Is300 (LS2 Project)
93 Mx3 SE 2.5 KLZE (sold it)
93 Mx3 GS 2.0 KFZE (killed it)
Re:
[quote="mr1in6billion"]Why didn't he just buy a celica?
the guy have install a LT1 in is celi-mx3-rsx, it's too crazy!!
http://www.mx-3quebec.com/Forum/viewtop ... hlight=lt1
the guy have install a LT1 in is celi-mx3-rsx, it's too crazy!!
http://www.mx-3quebec.com/Forum/viewtop ... hlight=lt1
-
projectmx
- Senior Member
- Posts: 2165
- Joined: December 7th, 2002, 2:01 am
- Location: windsor, ontario
- Contact:
Re: Some of the craziest mx-3's I have ever seen!!
That silver one is sporting either the european or jap bumper can't tell which, it's headlights have been discussed before there is some common car in europe he took the lights from it isn't a nissan though i can remember that much.
isn't the point of most show cars to do so much work it doesn't look anything like what you started with? i mean i always thought that was the point of spending all that money and doing all that work. sure you can just through some rims on and the ms front bumper and it looks great, but how is that special or different? as much as i love the ms front bumper tons of mx-3s have that so i have no idea what i'm going to do for mine yet.
There are two that i do like even though i didn't think i did at first
I like how the hood on this one has the sudden angle drop down to the bumper but everything else wraps smooth around and the graphics on the front really lend to the illusion the car just wraps around itself, has a very slipstream look to it
Again with this one i love how the body just wraps around and is really smooth I also like how it is wider in the rear and uses deep dished rims in the back and the front bumper is nice also
neither car is exactly something i'd do but both have very good elements and obviousely the people did hard work and spent a lot of money to get them there.
isn't the point of most show cars to do so much work it doesn't look anything like what you started with? i mean i always thought that was the point of spending all that money and doing all that work. sure you can just through some rims on and the ms front bumper and it looks great, but how is that special or different? as much as i love the ms front bumper tons of mx-3s have that so i have no idea what i'm going to do for mine yet.
There are two that i do like even though i didn't think i did at first
I like how the hood on this one has the sudden angle drop down to the bumper but everything else wraps smooth around and the graphics on the front really lend to the illusion the car just wraps around itself, has a very slipstream look to it
Again with this one i love how the body just wraps around and is really smooth I also like how it is wider in the rear and uses deep dished rims in the back and the front bumper is nice also
neither car is exactly something i'd do but both have very good elements and obviousely the people did hard work and spent a lot of money to get them there.
ProjectMx
My BP and AWD build thread
Cardomain
93 Mx-3 GS with bp and GTR AWD system
93 Escort GT daily driving
My BP and AWD build thread
Cardomain
93 Mx-3 GS with bp and GTR AWD system
93 Escort GT daily driving
-
Hood-R Oliver
- Regular Member
- Posts: 59
- Joined: November 8th, 2006, 1:06 pm
- Location: Kouvola, Finland
Re: Some of the craziest mx-3's I have ever seen!!
Makes it look like a crx... Damn those headlights look so familiar but jus can't think of anu car... maybe a punto?I like how the hood on this one has the sudden angle drop down...
Mx-3 enthusiast since 2004.