Check Out Our MX-3!

General Mazda MX-3 Discussions
Post Reply
trupowermotorsports
BANNED Member
Posts: 90
Joined: January 29th, 2007, 12:38 am
Location: Muskegon,Michigan
Contact:

Check Out Our MX-3!

Post by trupowermotorsports »

http://www.sounddomain.com/ride/2562301/1

We finally got some pics up!

Thanks Tru Power Motorsports
User avatar
mitmaks
Senior Member
Posts: 8704
Joined: September 10th, 2001, 2:01 am
antispam: ~SPAM*SUX~
Location: Spokane, WA
Contact:

Post by mitmaks »

good project, swap in Klze
Magnum s/s lines, strut bars, carbon fiber bezel, indiglow gauge, Sony Xplod, inverted c/f hood, SRD lower tie bar '93 GS SE '95 Cobra SVT #2722 '68 Charger R/T 440
http://www.cardomain.com/id/mitmaks
Image
User avatar
PATDIESEL
Senior Member
Posts: 4476
Joined: August 13th, 2001, 2:01 am
antispam: ~SPAM*SUX~
Location: Atlanta, GA.

Post by PATDIESEL »

good look'n starter car.
Image
ZE -strait neck,headers,2.5 exhaust,pheno spacers,lower cross member,GC coils,MS struts,Brembo slotted rotors,filled MS mounts,SS brake/clutch lines, CAI,to rear bat reloc,Hella headlamps,Hella DE fogs 180WHP
trupowermotorsports
BANNED Member
Posts: 90
Joined: January 29th, 2007, 12:38 am
Location: Muskegon,Michigan
Contact:

Post by trupowermotorsports »

Thanks!
trupowermotorsports
BANNED Member
Posts: 90
Joined: January 29th, 2007, 12:38 am
Location: Muskegon,Michigan
Contact:

Post by trupowermotorsports »

Just thought I would update everyone. We have been in steady haul a$$ mode the last couple weeks. Alot of the stuff is custom work so that I won't list till it is done and in... then we will decide if we like it, if not we will pitch it, if so we will post pics and how to's. Here is the list of things so far:

Black powdercoated valve cover with "Mazda" polished
Weapon R short ram intake
Twin Loop muffler w/ 2 1/4 inch piping (soon to come)
Front upper strut tower bar
Black housed euro tails
17" Sportmax 920 wheel's
Panasonic CQ-C7303U head unit (would recommend to anyone)
Kicker 3-way coaxial's in all four corners (amazing sound quality)
Directed 1500d Mono Amplifier
(2) 12" Pioneer TSW-306DVC subwoofers
Pillar trim painted black
Headliner died black
Misc. dash pieces painted aluminum
Green LED's in headlights (JDM look heads)
DGI harness bar (on the way)
Eibach Sportline springs (on the way)

We will post pics soon. Also check back often to watch the list grow. Thanks. TPM.
hharb
Regular Member
Posts: 595
Joined: October 16th, 2006, 12:40 am
Location: Ottawa

Post by hharb »

great commitment and fast tuning, sounds like you're workin hard on that baby, goodluck and keep us posted, and yeah post pictures, alot of them.
Image
User avatar
neutral
Supporting Member
Posts: 1770
Joined: December 27th, 2004, 10:19 am
Location: U.S. Mid Atlantic

Post by neutral »

Nice work and great to see another MX-3 getting saved and built up.
Image -Jim
User avatar
atlantamx3
Supporting Member
Posts: 2888
Joined: June 2nd, 2001, 2:01 am
Location: Kennesaw, Ga, USA
Contact:

Post by atlantamx3 »

trupowermotorsports wrote: Green LED's in headlights (JDM look heads)
JDM MX-3 headlights were completely clear/chrome. No black on the edges.


FYI
~Perry
Please visit
http://www.mx3-atlanta.com
Image
trupowermotorsports
BANNED Member
Posts: 90
Joined: January 29th, 2007, 12:38 am
Location: Muskegon,Michigan
Contact:

Post by trupowermotorsports »

well just alittle update for you all, we test fited and did a test run of the sound system and we must say it will take your breath away literally! we are running about 135-40 db' and we still have to do some tuning of the system our goal is 142 dbs with full street trim. We will continue to update. New Pics will be coming tommorrow hopefully! Thank for the support!

PS: We really need a set of power window door panels , driver side emerald green fender, gs front lip, divers seat and the back rest of the back seat (perfer black leather & like a gray carpet insert with like a rainbow thread pattern) let us know if you have any of this!
Post Reply

Return to “General Mazda MX-3”