//***v6 turbo kit in production...yes!!! for the mx-3***\\

A Forum For All Forced Induction Systems Topics Such As Turbos, Superchargers and Nitrous Oxide.
nope-mx3
Regular Member
Posts: 1590
Joined: December 1st, 2002, 2:01 am
Location: Norway
Contact:

Post by nope-mx3 »

monty73741 wrote:not to throw gasoline on the fire but MMI has the parts on there web site
http://www.mmiperformance.com/xcart/home.php?cat=304
And if you had read it a bit more careful, it also says this:
*Note: Please check with our Distributor Pakfeifer Tuning for purchasing this kit*

So, not in stock, and Oscar is the person to check with before ordering those parts from MMI.

-n
:: 2001 Mazda Mx-5 Sport // 2013 Volvo V40 D2 Momentum ::
MazdaManiacMx3
Supporting Member
Posts: 1637
Joined: February 18th, 2003, 2:01 am
Location: Jermyn,PA

Post by MazdaManiacMx3 »

dumb dums :roll:
93 Kandy Tangerine Mx3 GS-DE
05 Saab 9-2x (Wrx power plant)
02 Subaru Impreza OBS
05 Subaru forester Xt - sti mods
04 dodge ram - toy hauler -FOR SALE
& Lots of Toys to haul :D
User avatar
MX-3.com
Site Administrator
Posts: 654
Joined: November 6th, 2000, 2:01 am
antispam: No
Location: Milton, Ontario, Canada
Contact:

Post by MX-3.com »

To their defense , it does say this:
*Note: Please check with our Distributor Pakfeifer Tuning for purchasing this kit*
I am assuming Oscar would tell those who in quire, that orders can be taken, but they are not available at this time and are back ordered....

Oscar, any comments??
ImageJeff Aycan - Site & Forum Owner/Administrator
2003 Audi A4 3.0 Quattro Sedan (Brilliant Black)
2004 Audi A4 Avant 1.8T (Light Silver Metallic)
2000 Kawasaki Ninja ZX-6R (Lime Green/Ebony)
SOLD - 1995 MX-3 Precidia RS (Blaze Red)
SOLD - 2000 Honda Civic Si (Vogue Silver Metallic)
SOLD - 2005 Honda CR-V LX AWD (Redondo Red Pearl)


Please Help Support MX-3.com - (Contact me for MX-3.com Decal Purchases)
User avatar
EZ_4_FUN
Supporting Member
Posts: 1026
Joined: April 2nd, 2001, 2:01 am
Location: Toronto
Contact:

Post by EZ_4_FUN »

Correct,

I would have been the distributor of the kits; since MMI is not on the ball, well you can all conclude for yourselves what the story is. I assure you he is not selling ANYTHING on his website, and If i guess right, his site will go down once that expiry date takes effect.

I did receive an email from Michael yesterday demonstrating Abe's desire to finish his end. Included in the email were pics of the Intercoolers and turbos. although I only saw 2 of each.

There doesnt appear to be any quick resolve to this imo. The officers have not contacted me since the report. I am only left to assume they dont give a rats a-- about the case.

I might be heading down myself during reading week ( mid Feb) to see them in person and the officer in charge of the case.
OSKY
95 MX-3 GS ZE Turbo: MSnS-extra, AEM WB, Blitz boost controller, MSD 6A w/ Blaster2 Coil, ZE disty, Redtops @ 550, Walbro 255, Garrett T3/T04E 60 Trim w/ .63 A/R, 38mm Deltagate Mark II @4psi, FMIC, Apexi BOV, CM Dual friction, 4-6.25 Kickers, 2ch Alpine V12. That's Alll.

http://www.pakfeifertuning.com
User avatar
slimmyslim1420
Regular Member
Posts: 381
Joined: October 22nd, 2005, 12:22 pm
Location: Tennessee

Post by slimmyslim1420 »

EZ_4_FUN wrote:Correct,

I would have been the distributor of the kits; since MMI is not on the ball, well you can all conclude for yourselves what the story is. I assure you he is not selling ANYTHING on his website, and If i guess right, his site will go down once that expiry date takes effect.

I did receive an email from Michael yesterday demonstrating Abe's desire to finish his end. Included in the email were pics of the Intercoolers and turbos. although I only saw 2 of each.

There doesnt appear to be any quick resolve to this imo. The officers have not contacted me since the report. I am only left to assume they dont give a rats a-- about the case.

I might be heading down myself during reading week ( mid Feb) to see them in person and the officer in charge of the case.
I just wanted to say I went to Pakfeifertuning.com and went to purchase the turbo kit and it was going to let me. It didn't say anything about a back order or anything, there was even a cerificate issue with the checkout process for this kit. I didn't want to put this on here but I asked you in a pm why it was on your site and you didnt answer so I put it here. I don't think it should be there if you don't have the kit and if you do have it you need to send it to the people who have paid for it. its bad enough that people in Canada have parts and I don't when I paid for mine before they did. To me thats kinda shady.
1992 GS ZE swap 94 dash swap drilled and slotted rotors full ceramic pads CS SS clutch and brake lines KL-36 ecu zx-2 tokico struts eibach springs short shifter Tenzo exhaust Hi flow cat 2.5 in piping
User avatar
EZ_4_FUN
Supporting Member
Posts: 1026
Joined: April 2nd, 2001, 2:01 am
Location: Toronto
Contact:

Post by EZ_4_FUN »

I dont see why the listing should be removed. Once this is cleared, im sure Abe will inform me of the supplier of the pipes. I will retail the kit on my own without the affiliation of MMI.


Of course the website will not warn you of backorder. I dont know how to set it up in that manner.

I can reassure you that I have had MANY inquiries for the kit and have informed them of the pending situation and no subsequent orders have been accepted.

If someone were to order it as you did, they would be informed of the same thing.

Not shady at all, you made an assumption.
OSKY
95 MX-3 GS ZE Turbo: MSnS-extra, AEM WB, Blitz boost controller, MSD 6A w/ Blaster2 Coil, ZE disty, Redtops @ 550, Walbro 255, Garrett T3/T04E 60 Trim w/ .63 A/R, 38mm Deltagate Mark II @4psi, FMIC, Apexi BOV, CM Dual friction, 4-6.25 Kickers, 2ch Alpine V12. That's Alll.

http://www.pakfeifertuning.com
User avatar
monty73741
Forum Moderator
Posts: 2651
Joined: February 11th, 2001, 2:01 am
Location: baltimore,md usa
Contact:

Post by monty73741 »

nope-mx3 wrote:
monty73741 wrote:not to throw gasoline on the fire but MMI has the parts on there web site
http://www.mmiperformance.com/xcart/home.php?cat=304
And if you had read it a bit more careful, it also says this:
*Note: Please check with our Distributor Pakfeifer Tuning for purchasing this kit*

So, not in stock, and Oscar is the person to check with before ordering those parts from MMI.

-n
i clicked on the purchase button it didnt send me to pakfeifertuning, I could have check out the kit & bought it. If it is not avaible then it should not be avaible on his web site. Plus it there should be are direction link.
I just think if it is not avaible for purchase it shouldnt be able to be bought

jason
Jason Danaher
Please Help Support MX-3.com
MX-3.com Online Store - http://www.mx-3.com/osv3
CafePress - http://www.cafepress.com/mx3com
User avatar
slimmyslim1420
Regular Member
Posts: 381
Joined: October 22nd, 2005, 12:22 pm
Location: Tennessee

Post by slimmyslim1420 »

EZ_4_FUN wrote:I dont see why the listing should be removed. Once this is cleared, im sure Abe will inform me of the supplier of the pipes. I will retail the kit on my own without the affiliation of MMI.


Of course the website will not warn you of backorder. I dont know how to set it up in that manner.

I can reassure you that I have had MANY inquiries for the kit and have informed them of the pending situation and no subsequent orders have been accepted.

If someone were to order it as you did, they would be informed of the same thing.

Not shady at all, you made an assumption.
So your telling me had I put in my Credit Card info you you wouldn't have charged it? That is the thing i'm trying to find out. Are you letting more people put there money on hold for this thing? Its not me making any assumptions I'm asking questions. I never said you did anything. But sure you know how to put backorder on the part. You simply put it in parenthasees () under the name. And tell them to inquire about it if interested.
1992 GS ZE swap 94 dash swap drilled and slotted rotors full ceramic pads CS SS clutch and brake lines KL-36 ecu zx-2 tokico struts eibach springs short shifter Tenzo exhaust Hi flow cat 2.5 in piping
mx_klze_gsr
Junior Member
Posts: 11
Joined: January 27th, 2007, 4:33 pm

Post by mx_klze_gsr »

this will fit both v6 the de and the ze right or only the ze or the 1.8 im confused?
visit http://www.nadsny.com we are tryin to start something and need help check it out
MazdaManiacMx3
Supporting Member
Posts: 1637
Joined: February 18th, 2003, 2:01 am
Location: Jermyn,PA

Post by MazdaManiacMx3 »

It will fit all 3 ..
The DE/ZE kit are the same .. I don't blame you for asking this question either I wouldnt want to read 35 pages to find that answer ..
Kris --
93 Kandy Tangerine Mx3 GS-DE
05 Saab 9-2x (Wrx power plant)
02 Subaru Impreza OBS
05 Subaru forester Xt - sti mods
04 dodge ram - toy hauler -FOR SALE
& Lots of Toys to haul :D
User avatar
papa roached
Senior Member
Posts: 2761
Joined: December 10th, 2002, 2:01 am
Location: Montgomery, WVa

Post by papa roached »

well, obviously it wont fit any of them because there is none to have
93 MX-3 GS (collecting parts for Eunos Presso conversion), 94 626 Transmission (4.10 gears), KL31 camed KL-ZE, Millenia intake, Millenia TB, SSAutochrome V2 headers, Magnaflow cat, 2 1/4 in pipe, Top Speed Pro 1 muffler, 9lb Fidanza Flywheel, ACT clutch, Corksport SS clutch line, Corksport SS brake lines, Unorthadox UDP, 255 lph fuel pump, HEI mod, ghetto-charger intake, KL36 ECU, SRD transverse crossmember bushings, SRD shifter extention bushing, SRD crossmember, Corksport bronzoil shifter bushings, Brembo Crossdrilled and Slotted rotors, 15 inch Konig Heliums, ZX-2 S/R struts, Eibach lowering springs, OEM front strut bar, Ebay rear strut bar, BFGoodrich G-Force T/A KDWs

Parts needing installed: turbo kit from BB (if i ever get it), 9.0:1 CR Diamond pistons, 4340 forged H beam rods, C/J-Spec spoiler, Nissan red tops in KL rails
http://www.cardomain.com/id/blazejeremy
ninjajim4
Regular Member
Posts: 1163
Joined: December 18th, 2004, 2:01 am

Post by ninjajim4 »

papa roached wrote:well, obviously it wont fit any of them because there is none to have
whatre you talking about?? nothing fits in everything!! :lol:
MazdaManiacMx3
Supporting Member
Posts: 1637
Joined: February 18th, 2003, 2:01 am
Location: Jermyn,PA

Post by MazdaManiacMx3 »

papa roached wrote:well, obviously it wont fit any of them because there is none to have
Well Theoretically speaking ... :cry:
93 Kandy Tangerine Mx3 GS-DE
05 Saab 9-2x (Wrx power plant)
02 Subaru Impreza OBS
05 Subaru forester Xt - sti mods
04 dodge ram - toy hauler -FOR SALE
& Lots of Toys to haul :D
User avatar
Tommy D
Regular Member
Posts: 151
Joined: August 24th, 2005, 2:41 pm
Location: Cornwall, England

Post by Tommy D »

The kit will fit all K series V6, although efficiency will depend on the turbo used for capacity and boost the engine is designed for. So K8 will need smaller Turbo and DE/ZE etc bigger, depending on when spool and management are programmed, injectors will also need selecting for suitability. The exhaust manifods are all the same size and the D/P will need the same lower x-member fabrication 2.5" OR 3" dia. The inlet side of the kit, ie K8/DE/ZE/MS8 wil only need minor modification to adapt to the TB so to be fair the kit when/ if it is completed will give all the basic setup for and K series V6, what components depends on the spec and capacity of the engine used

Lets hope they materialise, :?
User avatar
mx3stylez
Regular Member
Posts: 114
Joined: October 31st, 2005, 4:56 pm
Location: edmonton, alberta

Post by mx3stylez »

so oscar, are you heading down to pay abe and the officer a visit this week?
klze swap, wisco 8.5 comp pistons, pauter rods, act stage 3 clutch, lightened flywheel, UR racing pulley, flex-o-lite oil cooler, 2.5" custom exhaust with high flow cat, B&M short throw shifter, S&R cross drilled rotors, , B&G lowering springs, maxxim 17" gun metal rims, modded nissan injectors, walbro 255 lph fuel pump, areomotive afpr, msd 6a , magasquirt v3, and turboed
Post Reply

Return to “Forced Induction”