(WTB) MISC. Interior Pieces and etc. PLEASE HELP US FIND!

trupowermotorsports · January 29th, 2007, 1:00 am

We are looking for the following:

MX-3 Manual(5 speed) center console
A-Pillar Trim in Black instead of the gay white
B-Pillar Trim in Black also
Headliner in Black
Driver Side Fender in perferably the tealish green.
Back seat in black, must be rip and tear free and in good show condition or close.

Let me know!

Vanished · Post by **Vanished** » January 29th, 2007, 2:17 am

OK what year for the center console do you need?

A/B-Pillars only came white, i'm 90% sure. Never seen any other color unless you paint it yourself whitch really shoudln't be a big deal. Headliners, unless custome, will also never be black.

If you want custome hey, thats alright. just making it clear these dont' come as stock options, and a limited number of people with have them the way you want (black).

trupowermotorsports · January 29th, 2007, 3:53 am

92 center console but does 92-95 fit ? I have the one where the thing lifts up and theres cup holders.

I wish they came in black, they look gay white lol. guess ill have to do the headliner myself.

Well if anyone has the trim or headliner in black let me know!

also I need a back seat!

2fazed · Post by **2fazed** » January 29th, 2007, 12:43 pm

The a pillar and headliner were only made in beize and grey. You can use vinyl paint to make your a pillar'd black. The headliner is a harder problem to change.

trupowermotorsports · January 29th, 2007, 1:24 pm

well does anyone have a gray headliner and trim?

PATDIESEL · Post by **PATDIESEL** » January 29th, 2007, 2:35 pm

They are all the Grey/White, not two different colors.
As for the shifter bezel, you need one from a 92-93 model. 94 and above are different. 94+ the center part of the dash is slightly tilted tword the driver and the 93- are straight so the shifter trim is not compatable between the two model interiors.

ariesdude · Post by **ariesdude** » January 29th, 2007, 6:37 pm

Your best bet to find parts like that will be to hit some junkyards around Grand Rapids. Try http://car-part.com for finding parts from junkyards. Ebay also has many hard to find stuff. As previously said you have to redo the headliner and the pillars yourself. Finding a back seat in good condition may not be easy - you might want to consider reupholstering - I think there was group buy for upholstery kits. Kevin had posted photos of the kits he bought from the GB - http://www.mx-3.com/phpbb2/viewtopic.ph ... 62&start=0

trupowermotorsports · January 30th, 2007, 1:51 am

Thanks!

vasilaar · Post by **vasilaar** » January 31st, 2007, 10:44 am

the center console... are u talking about where the shifter and boot is?
if so i've got one.
PM me if u still need it

ruthless_mx3 · Post by **ruthless_mx3** » January 31st, 2007, 1:05 pm

I have a w/ sunroof headliner thats been re-done in black w/ blue flames. I am either going to sell it and get another to re-cover or just get this one recovered again. I would also trade for a stock headliner (any color) plus a few bucks. Or if you are looking for a no-sunroof headliner I have one along with A and B pillars (manual belts) that can be done in black (dyed or covered) but shipping would be a little tricky for the headliner. Can do black or any other color for that matter. The options are almost endless. If there is a certain material or fabric or color you are interested in I will try to find it and let you know if it is do-able or not and how much its going to cost. I can also post pics if anyone is interested.

trupowermotorsports · January 31st, 2007, 3:49 pm

I'd like to get it in black (headliner and trim) other wise the trim black and the headliner black withTru Power Motorsports in it (mx-3 tealish green color)

ruthless_mx3 · Post by **ruthless_mx3** » February 2nd, 2007, 5:36 pm

solid black is no problem dyed or recovered, recovered obviously more expensive but looks a whole lot better. Also, if you are going for the clean smooth look, you can go w/o the sunvisors and the trim piece around the sunroof opening. Just don't cut the holes for the visors and if wrapped nice in the corners there is no need for the sunroof trim ring leaving you with a seamless panel. I did my sunroof panel the same as the A and B pillars, kinda brings everything together.
Custom lettering can be done but could get rather pricey. It would pretty much have to be embroidered in. If you have a sunroof, that panel would be a cool place to put your lettering.

trupowermotorsports · February 2nd, 2007, 6:45 pm

no sunroof, get me prices