Anybody Know

A forum for Drag Strip/Track Racing Discussions. (NO Street Racing or Kill Stories, they WILL be deleted.)
Post Reply
mx-3 mike
Junior Member
Posts: 22
Joined: December 28th, 2006, 10:18 pm
Location: bancroft, Ontario

Anybody Know

Post by mx-3 mike »

Just Wondering anybody have or know of 1/4 mile times for a 94 dohc 1.6 auto stock or close to stock.
nope-mx3
Regular Member
Posts: 1590
Joined: December 1st, 2002, 2:01 am
Location: Norway
Contact:

Post by nope-mx3 »

18 seconds maybe?

-n
:: 2001 Mazda Mx-5 Sport // 2013 Volvo V40 D2 Momentum ::
mx-3 mike
Junior Member
Posts: 22
Joined: December 28th, 2006, 10:18 pm
Location: bancroft, Ontario

Post by mx-3 mike »

well that's good to know i was thinking more of the 19's and low 20's just wondering is anybody running mid 17's with a dohc auto and if so how did the get it to run there
mx-3 mike
Junior Member
Posts: 22
Joined: December 28th, 2006, 10:18 pm
Location: bancroft, Ontario

Post by mx-3 mike »

well that's good to know i was thinking more of the 19's and low 20's just wondering is anybody running mid 17's with a dohc auto and if so how did the get it to run there
User avatar
Limegreen mx-3
Regular Member
Posts: 1778
Joined: October 29th, 2002, 2:01 am
Location: San Antonio TX
Contact:

Post by Limegreen mx-3 »

i ran a 16.9 on my 5spd sohc mx-3 but that was 5-6 years ago. ran it again last year and got a 17.1@79 slow compared to what it is now.
(12.4@118@18psi) 92 MX-3, KIA (BP-DE)Swap, Electromotive TEC II Standalone, 8,200 Rev Limit, Custom Intake/Exhaust Manifold, 1,000cc PTE Injectors, Custom Fuel Rail, Aeromotive FPR, 80MM Holley TB, MSD 8.5MM Wires, NGK V-Power #8, SC6262 Turbo, 3 in. DownPipe, Tial WG/BOV, 600HP PTE FMIC, 2.5IN Intercooler Piping, EQUUS/Autometer KIA G-Series Tran, Extreme ACT Clutch, Built BP in starting process.
osargeant
Regular Member
Posts: 341
Joined: December 17th, 2001, 2:01 am
Location: Bridgetown, Barbados
Contact:

Post by osargeant »

I believe a fairly stock 1.6 DOHC MX3 manual runs low 17s, with a couple mods like intake, exhaust etc, you might be doing high 16s.
JSpec Turbo MX3 (1.6 DOHC)
http://www.cardomain.com/memberpage/310985

Port and Polished Head, Ported Intake Manifold, Valve Job, GTX Manifold, Hybrid Turbo, Cone Filter, 2.5" Exhaust, 2.5" Downpipe, ACT Street Clutch, Lightened Flywheel, MSD 6A Ignition, Boost Retard and SS Coil, Magnecor Plug Wires, Denso Iridium Plugs, UR Lightened Pulley, Spearco FMIC, Turbo XS BOV & MBC, BEGI RRFPR, Supra Injectors, Walbro 255 Fuel Pump, Autometer Gauges, Pivot Shift Light
User avatar
TREVO123
Regular Member
Posts: 654
Joined: November 29th, 2005, 8:57 pm
Location: BC, CANADA
Contact:

Post by TREVO123 »

My sohc ran a 18.5 at 72mph, and my elevation might be diff then u guys
TREVO-Under major construction, Bp coming soon! TO a mx3 near you
1993 MX-3 RS,FULL BLITZ KIT(PROTOTYPE)17"10 SPOKE RIMS,SOHC 1.6L.
http://www.cardomain.com/ride/2189811
mx-3 mike
Junior Member
Posts: 22
Joined: December 28th, 2006, 10:18 pm
Location: bancroft, Ontario

Post by mx-3 mike »

yea thank's guys still a would think there would be a good second at least between the auto and manual in the 1/4 and keep the info coming
Post Reply

Return to “Drag Strip/Track Racing”