Thumbs Up for probinator chip

hgallegos915 · Post by **hgallegos915** » October 12th, 2006, 7:46 pm

YEEHAAA

Ok the chip DOES make a big difference (when compared to stock k8)

Does not smoke AT ALL.. its a CLEAN mofo.

It pulls harder... I did notice in some acceleration it feels laggy... BUT i guess it did help. I am using the WRONG vaf.. je50 = mx3. Ill be picking up the kl-02 vaf this weekend in trade for a millenia laternator.. im thinking about it tho.

I can completely spin 1st gear and completely spin 2nd gear (for the fun)

I wonder how it will do with the correct vaf. I get no CEL lights and yet i CAN check for codes. Has vris points set for millenia curved neck. Correct ign and fuel timing.. makes a big diff there. No gas smell.

I recommend this chip even if you have kl31 ecu i guess for the vris points.

THUMBS UP

Vanished · Post by **Vanished** » October 12th, 2006, 8:54 pm

what ecu did you use? from a DE or your K8?

hgallegos915 · Post by **hgallegos915** » October 12th, 2006, 9:35 pm

Using KLDE ECU he couldnt use my k8, it was a 92.

Ill be using kl01 vaf but i need to get ahold of it. Feels good tho!

mx3autozam · Post by **mx3autozam** » October 13th, 2006, 12:36 am

I have a 92 ecu as well so I can't get ine chipped. I do have a kl01 ecu and kl02 vaf in my garage that i'm gunn get chipped from probinator.

As for you saying you should also chip the kl31 so you egt the proper vris points. i would not touch a kl31 ecu. sell it and chip a klde one.

hgallegos915 · Post by **hgallegos915** » October 13th, 2006, 12:50 am

true because kl31 ecu is worth around 200 dllrs, to get ur klde chipped its like 75 dllrs. The kl31 ecu gives u power but i think the propper tunning and vris points will help more. OR you can get msd window switches. GO probinator ecu. The difference is ALOT. IMO..

Vanished · Post by **Vanished** » October 13th, 2006, 1:52 am

window switches are expensive as well..get a probe ecu off ebay, thats what i'm gonna do. Question tho: how much did it cost?

Steeb · Post by **Steeb** » October 13th, 2006, 2:54 am

he cant change the vris points?

hgallegos915 · Post by **hgallegos915** » October 13th, 2006, 3:12 am

yeah he can. costed me around 75 dllrs. Well worth it. Adds around 10 hp over kl31 ecu. As per dyno on his cardomain. Forgot the link.

Steeb · Post by **Steeb** » October 13th, 2006, 6:01 pm

go dyno that sucker!

dont u guys have 93 octane in texas? i wonder how much more power you could squeeze out if it were tuned for 93

v4NDALu · Post by **v4NDALu** » October 13th, 2006, 6:26 pm

here can i buy one chip for my mx3?

someone can send me one to Portugal?

Mnemonic · Post by **Mnemonic** » October 13th, 2006, 6:59 pm

or you can get the kl31 off the internet and just do your own eproms

why pay 75 dollars, when people on probetalk have already said what to adjust to give it a more agressive fuel map

and a eprom burn will only run you 15-25 dollars

i know i've done it multiple times for a few honda friends, who wanted to use skunk2 ecu's but didnt want to pay the price

kl31 ecu file

Why pay 75 dollars when the information is open source and you can do it yourself

for less, if you just do some searching

Mnemonic · Post by **Mnemonic** » October 13th, 2006, 7:02 pm

Steeb wrote:
dont u guys have 93 octane in texas? i wonder how much more power you could squeeze out if it were tuned for 93

You do know that if you use anything less than 92-93 your going to have problems as the lowest fuel your soposed to use in the klze's is 92

hgallegos915 · Post by **hgallegos915** » October 14th, 2006, 2:07 am

ugh nevermind , i went to the track and got a crappy flat 16 then 16.1 Best run was 15.7

With stock probe GT ecu I had run a 15.5 and je50 vaf. With k8 ecu I ran 16.

With probinator ecu and je50 vaf i ran those crap times. The torque IS there. Like on street driving but on the drags it sucks so far. I got the crappy EGR codes however the CEL is not on. I got code 69? i think fan temp sensor I did wire it directly. I reset the tps tires @ 20 psi. SPIN alot 1st and second.. im quite dissapointed for now...

v4NDALu · Post by **v4NDALu** » October 14th, 2006, 5:58 am

how do i know that this map will work on my mx3? my mazda it's a 1.8 v6 1992"

http://stu.aii.edu/~bob031/mx3/KL31.bin

atlantamx3 · Post by **atlantamx3** » October 14th, 2006, 10:34 am

hgallegos915 wrote:ugh nevermind , i went to the track and got a crappy flat 16 then 16.1 Best run was 15.7

With stock probe GT ecu I had run a 15.5 and je50 vaf. With k8 ecu I ran 16.

With probinator ecu and je50 vaf i ran those crap times. The torque IS there. Like on street driving but on the drags it sucks so far. I got the crappy EGR codes however the CEL is not on. I got code 69? i think fan temp sensor I did wire it directly. I reset the tps tires @ 20 psi. SPIN alot 1st and second.. im quite dissapointed for now...

Sounds like it was YOUR crappy driving rather than the ECU....