i just bought mx3 seats for my zx2 and they are great but i need covers cause the driver side is teared. and reupostery costs around 1500$ to do it properly
any seat covers that fit well? any form fitted ones?
preferably black or black and white
Mx3 seats. are there any covers that fit well
-
- Junior Member
- Posts: 1
- Joined: August 19th, 2006, 8:30 pm
i was looking a few years back and there were some dirrect replacement they were around $500 cdn i dont remember the brand but i can look it up sometime soon
95 rs with custom short ram air, b&m short throw shifter, probe 2.0L header with 2 1/4" exhaust all the way back, catco high flow cat, apc high flow muffler with 4.5" tip, accel 8 mm wires, blaze red, cf altezzas, gun metal 17" mr7s, slotted cross drilled rotors on the way with hawk hps pads, red and white interior, other then that its stock.
- solo_ryder
- Senior Member
- Posts: 6289
- Joined: October 16th, 2004, 2:01 am
- Location: British Columbia
-
- Supporting Member
- Posts: 1637
- Joined: February 18th, 2003, 2:01 am
- Location: Jermyn,PA
- ovendenk
- Supporting Member
- Posts: 911
- Joined: January 12th, 2004, 2:01 am
- Location: Kamloops, BC
- Contact:
http://www.autoleathers.com sells katzkin covers. or you can get them from perry, the guy in bc who made mine and was the upholsterer for the attempted gb a while back.
kevin (aka The Oven)
93 mx-3 GS KL-ZE with KL31 cams and properly chipped ecu
All mods are on my website: http://ca.geocities.com/ovendenk
MX-3.com Worklog: http://www.mx-3.com/phpbb2/viewtopic.php?t=48462

93 mx-3 GS KL-ZE with KL31 cams and properly chipped ecu
All mods are on my website: http://ca.geocities.com/ovendenk
MX-3.com Worklog: http://www.mx-3.com/phpbb2/viewtopic.php?t=48462
