[FS] Pakfiefer Inverted CF hood NEW PRICE AND PAYMENT OPTION
- bushidosword
- Regular Member
- Posts: 231
- Joined: March 31st, 2005, 1:49 pm
- Location: Ontario Canada
[FS] Pakfiefer Inverted CF hood NEW PRICE AND PAYMENT OPTION
looking for $500, pref. pickup....shipping is tough. This hood used not even one full season and is mint. No scratches or cracks. Anyone in the area would be welcome to drive up and we can transfer it on to your car and you drive it home!
pm me!
thanks!
pm me!
thanks!
Last edited by bushidosword on June 28th, 2006, 10:08 pm, edited 1 time in total.
_____________________________________


- jschrauwen
- Forum Moderator
- Posts: 6052
- Joined: September 27th, 2003, 2:01 am
- Location: Frankford, Ontario, Canada
- Contact:
Is it possible to email me some pics. I may be interested. Reason for sale????
BTW, this CF hood is going for $375usd including hinges and hood pins too. http://www.mx-3.com/phpbb2/viewtopic.php?t=51817
BTW, this CF hood is going for $375usd including hinges and hood pins too. http://www.mx-3.com/phpbb2/viewtopic.php?t=51817
'92 GS-ZE - sold, '95 GS - sold, '02 Protege LX - Daughter, '00 Audi A4 2.8 QTip, Ducati TT2

90 JDM RHD 300ZX TT - 572.1 RWHP | 590.0 RWTQ | 21 PSI | Pump gas

90 JDM RHD 300ZX TT - 572.1 RWHP | 590.0 RWTQ | 21 PSI | Pump gas
- bushidosword
- Regular Member
- Posts: 231
- Joined: March 31st, 2005, 1:49 pm
- Location: Ontario Canada
Hey john!
Yeah i saw that but mines the inverted one....payed more for it!
I can fire you a pic of it on the car, the pins from my car are included.
Im selling because sadly my mx3 is dead. The tranny died and i had it rebuilt, then it faild 2 months later...they are being very shifty at the shop and WILL NOT FIX THIR MISTAKE. I have had the car sitting for the last two months, and shes just waisting away... so im parting out her valuables, and suing them for the replacement cost of the tranny (i posted a detailed story) (tho it may still say that they are gonna fix it which has changed)
As you remember from the meet in belleville last summer the fitment is very good and i would be willing to trade my hinges for any other set for the car as i am putting the stock hood back on. My hinges have been slotted for full adjustment.
Take care john ttyl
-Andrew
Yeah i saw that but mines the inverted one....payed more for it!
I can fire you a pic of it on the car, the pins from my car are included.
Im selling because sadly my mx3 is dead. The tranny died and i had it rebuilt, then it faild 2 months later...they are being very shifty at the shop and WILL NOT FIX THIR MISTAKE. I have had the car sitting for the last two months, and shes just waisting away... so im parting out her valuables, and suing them for the replacement cost of the tranny (i posted a detailed story) (tho it may still say that they are gonna fix it which has changed)
As you remember from the meet in belleville last summer the fitment is very good and i would be willing to trade my hinges for any other set for the car as i am putting the stock hood back on. My hinges have been slotted for full adjustment.
Take care john ttyl
-Andrew
_____________________________________


-
- Regular Member
- Posts: 36
- Joined: May 11th, 2005, 11:21 pm
- Location: Cornwall, Ontario
Pics
Send me some pics, I am interested!
- bushidosword
- Regular Member
- Posts: 231
- Joined: March 31st, 2005, 1:49 pm
- Location: Ontario Canada
- bushidosword
- Regular Member
- Posts: 231
- Joined: March 31st, 2005, 1:49 pm
- Location: Ontario Canada
-
- Regular Member
- Posts: 603
- Joined: August 2nd, 2001, 2:01 am
- Location: Brantford, Ontario, Canada
- Contact:
Arrrgggghhhh. It's a six hour drive from Brantford.
Any interest in a trade for a 1/8th scale HPI Savage SS 4.6 remote control truck?
Here is all the info on the truck:


http://www.hpiracing.com/kits/kitMain.php?partNo=871
Also has a brand new dodge body, a 3 speed transmission so it goes about 45-50 mph.
Or, payment at a later date?
Any interest in a trade for a 1/8th scale HPI Savage SS 4.6 remote control truck?
Here is all the info on the truck:


http://www.hpiracing.com/kits/kitMain.php?partNo=871
Also has a brand new dodge body, a 3 speed transmission so it goes about 45-50 mph.
Or, payment at a later date?
92 MX-3 GS 2.5 KLZE
14.385 @ 98.21
14.385 @ 98.21
- bushidosword
- Regular Member
- Posts: 231
- Joined: March 31st, 2005, 1:49 pm
- Location: Ontario Canada
Thanks for the intrest timpronk, but Im not really in to remote controlled cars.
I regretfully cannot take payment after you take the hood, its a matter of there are things that i want/need. I hope u understand
I will, however consider partial trade for the following things:
Home depot gift certificates....maybe u have them but dont shop there?
specific other gift certificates, let me know and i will tell you if its ok.
I would be intrested in aftermarket parts for a 2003 mitsubishi eclipse gts.
(suspension, cai, clear corners, front lip, rims 5lug etc.)
electronics, (good) home theatre maybe, xbox 360 games maybe
gift certificate for any local place that can line a tub.
Actually this thread could be pretty fun, dont be shy to make offers.
(I am looking for $400 or what i find to be that value in these other items, or a combination of both)
Thanks!
I regretfully cannot take payment after you take the hood, its a matter of there are things that i want/need. I hope u understand

I will, however consider partial trade for the following things:
Home depot gift certificates....maybe u have them but dont shop there?
specific other gift certificates, let me know and i will tell you if its ok.
I would be intrested in aftermarket parts for a 2003 mitsubishi eclipse gts.
(suspension, cai, clear corners, front lip, rims 5lug etc.)
electronics, (good) home theatre maybe, xbox 360 games maybe
gift certificate for any local place that can line a tub.

(I am looking for $400 or what i find to be that value in these other items, or a combination of both)
Thanks!
_____________________________________


- bushidosword
- Regular Member
- Posts: 231
- Joined: March 31st, 2005, 1:49 pm
- Location: Ontario Canada
- claude matte
- Regular Member
- Posts: 233
- Joined: July 17th, 2002, 2:01 am
- Location: ont canada
- Contact:
i told you it would be a hard sale (streetscene)
http://members.cardomain.com/mx3mazda
http://www.cardomain.com/ride/3346603" onclick="window.open(this.href);return false; new pics
http://www.cardomain.com/ride/3346603" onclick="window.open(this.href);return false; new pics
-
- Senior Member
- Posts: 6451
- Joined: June 19th, 2004, 2:01 am
- Location: El Paso Tx U.S
- Contact:
what does this inverted hoof have that other new inverted hoods dont have?
-hec
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
- bushidosword
- Regular Member
- Posts: 231
- Joined: March 31st, 2005, 1:49 pm
- Location: Ontario Canada
- bushidosword
- Regular Member
- Posts: 231
- Joined: March 31st, 2005, 1:49 pm
- Location: Ontario Canada
Thanks, i read that from you in my pms too.claude matte wrote:i told you it would be a hard sale (streetscene)
I WILL WAIT TO SELL THIS I WILL TAKE IT OFF THE CAR AND GARAGE STORE IT BEFORE SELLING IT FOR LESS.
This is a HOT hood, and IMO totaly changes the look of the car, while providing a little much needed ventalation!
_____________________________________


-
- Senior Member
- Posts: 6451
- Joined: June 19th, 2004, 2:01 am
- Location: El Paso Tx U.S
- Contact:
yeah but well be aware that one can get it for 300 - 350 on ebay .. thats why you are having a hard time selling it. it is a hot hood i agree. Makes car look different.
-hec
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!
MX-3 w/ curved neck millenia klde, boosted @ 5 psi. /bov and wastegate are good!/ nitto drag radial/ gutted interior/ millenia red top injectors, vortech fmu/aem wideband/ all bolts ons/ Car put together 100% by me. Mechanic? who needs a mechanic? ew.. real men work on their own cars!