Bad KLZE or did I do somthing wrong?

V6 Technical/Performance Discussions
Post Reply
User avatar
XxantwawnxX
Regular Member
Posts: 1281
Joined: January 8th, 2005, 11:08 pm
Location: Newportnews VA

Post by XxantwawnxX »

YEa bust out the old tmiing light and a paperclip : P IF tis not the timing id say u have the wires mixed up......
Image

* * * * * * 92 Mx3 ZET, rear/front swaybars,srd crossmember,HKS SSQV,cold air,ZE with millinia mani and TB and 280cc injectors,INtrax springs with tokiko HP struts, Grounding kit, MotegiTrakLite wheels 17's at 14lbs each, MSnS Running fuel and spark,HEI mod,T3/To4E .60/.63 stage 3 turbine,3rd gen rx7 fuel pump, SSAC Headers/hotpipes ,38 ext tial wastegate, findanza flywheel, SBC TZ clutch/pressureplate,braille11pound battery/ magnum drilled F/R rotors,projectors, CXmotorsports almuminum intercooler.
Top
User avatar
Custom_V6_Limited_SE
Regular Member
Posts: 508
Joined: October 11th, 2005, 12:58 pm
Location: Spring Hill, FL

Post by Custom_V6_Limited_SE »

Timing light to see if it is timed correctly... but, before you do that, try changing the spark plugs in 4 and 5 (not likely... but what the heck it's easy to check).
'93 MX-3 GS SE:My Mods
Top
User avatar
2.5mazda
Regular Member
Posts: 229
Joined: April 13th, 2006, 8:46 pm
Location: Iowa

Post by 2.5mazda »

I did that 6 times, lol

I figured it out. The problem was me working on it at 2:00am!!

Once I had some sleep, I quickly realized that the firing order was off :oops: :oops:
I swap a whole engine and cant get the plug wires on right? :oops: :oops:

Lesson learned: go to sleep when Mt Dew can no longer do the trick!
http://www.streetpsi.net

1992 Mazda MX-3 GS ZE
Top
Post Reply

Return to “V6 Technical/Performance”