For All You Big Drinkers out there hahah

A forum for Appearance Discussions. (Exterior, Body Kits, & Interior)
143lancemx3
Regular Member
Posts: 46
Joined: October 21st, 2004, 2:01 am
Location: Canada, SK, Regina

For All You Big Drinkers out there hahah

Post by 143lancemx3 »

I was thinking of this idea of putting a drink dispenser in the glove box..

You would have to fibreglass or something to make the cup holder. Then buy some windshield washer pissers(pumps).. and hook the tubing up to some kind of jug you could mount in ur car. (The jug would have to be easy to get at though for cleaning). Then just hook up the electrical and the button. I was thinking of doing this in the spring...

The idea wasn't meant for drinking and driving unless you really want to..and also it would be a good way to hide it from cops unless there that smart...

Mmm Mmm Beer


Any comments or tips... And if you wanna be a dink about this just dont reply please :D
`*-~'"92 MX3'"~-*`
User avatar
Vanished
Regular Member
Posts: 1826
Joined: July 4th, 2004, 2:01 am
Location: Saskatoon Canada

Post by Vanished »

Hahah i love the idea man. When I was really young I always though of what i could do with windsheild washer fluid things. I thought maybe i coudl extend the tubes to the sides of my car, and put like...some gas into the resivore and have a flame at each end...then everytime i press the button it woudl shoot a flame haha...


But yeah, defantly a good thought, it could very well work...I got a much simple idea tho.

Buy a cup holder, attach anywere. Then get tube that pokes out just above it, with the resevoir in the trunk. Then you just put the cup in the holder.

You coudl also get seperate resevoirs for different beverages. It might be to hard to NOT drink and drive if it was alchoholic...so for the sake of you and my bad spelling i suggest you dont' do it. It'll just be to easy.
1992 Blaze MX-3 GS *R.I.P.*

1993 Blue 93 SE-ZE

http://www.cardomain.com/ride/2770987/2
143lancemx3
Regular Member
Posts: 46
Joined: October 21st, 2004, 2:01 am
Location: Canada, SK, Regina

Post by 143lancemx3 »

Hahaha thatd be sick, sending flames out at the touch of a button.

But yah, your way would work good to. One for booze and one for coke haha. Make money bartending outta your car lol.

P.S. saw your car, that thing looks like it came right out of the damn factory its in damn good cond.
`*-~'"92 MX3'"~-*`
Mx-3_Chris
Junior Member
Posts: 4
Joined: August 21st, 2005, 7:09 am
Location: Ohio

Post by Mx-3_Chris »

man i have an even better idea just buy one of them caps that u put 2 drinks in on each side with the strwl and there u go lol :-P
Black 93' Mx-3 Gs...^_^ plan on getting pics of my car up soon nothing special atm though..
User avatar
BuGS
Regular Member
Posts: 1521
Joined: May 5th, 2004, 2:01 am
Location: East Wenatchee, WA, USA
Contact:

Post by BuGS »

A guy in one of my college classes did that. He actually put it under the hood of his car up towards the front to keep it cold from the air, and since it is not in the cabin you can't get caught with an open container. Worked good, just make sure that you buy like a brand new resivoir. Don't use an old one, you will regret it if you do...
User avatar
Drewation
Regular Member
Posts: 152
Joined: September 11th, 2005, 5:31 pm
Location: Saskatoon Saskatchewan

Post by Drewation »

interessting idea good luck! lol, so you want to use the existing windshield wash button to dispense it? and the old resevoir? well since you live in saskatchewan i highly dont suggest it just that are streets are dirty and with spring and rain and everything id think you would highly regret it
*new* 1995 Blaze Red MX-3 GS

Image

http://www.cardomain.com/id/drewationmx3
95 rs
Regular Member
Posts: 743
Joined: February 2nd, 2005, 11:11 pm
Location: thompson, manitoba

Post by 95 rs »

good i dea but i think ill just stick with the gerry can with some good old rye and coke with a lot of ice. sitting in the back seat...... thats my type or drink dispenser :)
95 rs with custom short ram air, b&m short throw shifter, probe 2.0L header with 2 1/4" exhaust all the way back, catco high flow cat, apc high flow muffler with 4.5" tip, accel 8 mm wires, blaze red, cf altezzas, gun metal 17" mr7s, slotted cross drilled rotors on the way with hawk hps pads, red and white interior, other then that its stock.
User avatar
Vanished
Regular Member
Posts: 1826
Joined: July 4th, 2004, 2:01 am
Location: Saskatoon Canada

Post by Vanished »

edit: haha nvm...
Last edited by Vanished on March 18th, 2006, 2:20 pm, edited 1 time in total.
1992 Blaze MX-3 GS *R.I.P.*

1993 Blue 93 SE-ZE

http://www.cardomain.com/ride/2770987/2
User avatar
Drewation
Regular Member
Posts: 152
Joined: September 11th, 2005, 5:31 pm
Location: Saskatoon Saskatchewan

Post by Drewation »

Vanished wrote:drew you can't get dirt and grime into your windsheld washer resevoir....
yes? i mean on the windshield if he uses his existing resevoir for this he wont have anything for the windshield and since are province is fairly dirty i wouldnt suggest it since usualy just wipers going alone makes itn worst.
*new* 1995 Blaze Red MX-3 GS

Image

http://www.cardomain.com/id/drewationmx3
143lancemx3
Regular Member
Posts: 46
Joined: October 21st, 2004, 2:01 am
Location: Canada, SK, Regina

Post by 143lancemx3 »

lol Nah i would make a whole seperate system from the windshield washer...

P.S. So if theres open liqour under the hood they cant do anything?
`*-~'"92 MX3'"~-*`
User avatar
Drewation
Regular Member
Posts: 152
Joined: September 11th, 2005, 5:31 pm
Location: Saskatoon Saskatchewan

Post by Drewation »

143lancemx3 wrote:lol Nah i would make a whole seperate system from the windshield washer...

P.S. So if theres open liqour under the hood they cant do anything?
i dont think so cause its like if its in the trunk, you have to get out to get it or something
*new* 1995 Blaze Red MX-3 GS

Image

http://www.cardomain.com/id/drewationmx3
143lancemx3
Regular Member
Posts: 46
Joined: October 21st, 2004, 2:01 am
Location: Canada, SK, Regina

Post by 143lancemx3 »

good point.. dont think id risk it..but if you think about it.. how many cops have made you pop ur hood looking for booze?
`*-~'"92 MX3'"~-*`
User avatar
Hoodzy
Regular Member
Posts: 1526
Joined: February 19th, 2005, 4:15 pm
Location: Calgary, Alberta
Contact:

Post by Hoodzy »

ahahah dirnking and driving a bad idea in general no matter where its coming from!!!!

we dont need anymore mx-3's dead :P
http://www.cardomain.com/id/hoodzy13" onclick="window.open(this.href);return false;
http://www.id-studio.ca" onclick="window.open(this.href);return false;
http://www.behance.net/CollinH" onclick="window.open(this.href);return false;
1995 Creek Mica Blue GS
143lancemx3
Regular Member
Posts: 46
Joined: October 21st, 2004, 2:01 am
Location: Canada, SK, Regina

Post by 143lancemx3 »

true that
`*-~'"92 MX3'"~-*`
User avatar
Bolverk
Regular Member
Posts: 249
Joined: August 27th, 2005, 5:20 pm
Location: Orem, Utah

Post by Bolverk »

It would be a good idea in that new VW with the refridgerated glovebox, but bad in any other car. I hate warm drinks.
1992 Mazda MX-3 GS KLZE
Locked

Return to “Appearance”