Kl62 ECU eprom

V6 Technical/Performance Discussions
Post Reply
mazdaspeedmx_3
Regular Member
Posts: 151
Joined: February 22nd, 2006, 3:41 pm
Location: St. Thomas

Post by mazdaspeedmx_3 »

i've tried using that ecu ...but my fan comes on and my car doesn't have spark
2006 best ET 14.43 @ 96.9mph
93 MX-3 GS-95 Curveneck klze, kl-01 cammed,homemade CAI,HEI module, chipped kl-07 ECU,UDP,KYB GR-2 struts,DropZone lowering springs, Toyo Proxes 4's 205-50-r15
parts to be installed:Turbo hot pipes,T04E/t3 50/63 57 trim, ssqv BOV, hks style 38mm wastegate
the rest of my turbo set up and IPP hp rebuild kit is in the NEAR future
SOON TO BE MX-3ZE-T
Top
pauli_au
Junior Member
Posts: 12
Joined: August 11th, 2005, 9:45 pm
Location: Brisbane, Australia

Post by pauli_au »

The KL62 ecu definately needs a MAF (not a VAF) and it will expect to see an auto transmission or it will throw codes.
Top
mazdaspeedmx_3
Regular Member
Posts: 151
Joined: February 22nd, 2006, 3:41 pm
Location: St. Thomas

Post by mazdaspeedmx_3 »

i don't wanna use the ecu i wanted to know if i could take the eprom chip and put it in a kl07 ecu
2006 best ET 14.43 @ 96.9mph
93 MX-3 GS-95 Curveneck klze, kl-01 cammed,homemade CAI,HEI module, chipped kl-07 ECU,UDP,KYB GR-2 struts,DropZone lowering springs, Toyo Proxes 4's 205-50-r15
parts to be installed:Turbo hot pipes,T04E/t3 50/63 57 trim, ssqv BOV, hks style 38mm wastegate
the rest of my turbo set up and IPP hp rebuild kit is in the NEAR future
SOON TO BE MX-3ZE-T
Top
User avatar
FlyVFR
Supporting Member
Posts: 504
Joined: July 27th, 2005, 3:18 am
Location: Southwestern, CT
Contact:
Contact FlyVFR

Post by FlyVFR »

I doubt it will work since the I/O parameters are different.
Stock 92 MX-3 GS
93 MX-3 GS KLZE
98 BMW 328IS
81 Trans AM NASCAR Pace Car
80 Trans Am INDY Pace Car
www.MyMX3.com Domain For Sale!
My Feedback File
Top
Post Reply

Return to “V6 Technical/Performance”