Kl62 ECU eprom

mazdaspeedmx_3 · Post by **mazdaspeedmx_3** » February 22nd, 2006, 4:35 pm

i have a kl62 ecu that came with my klze. i was wondering if i could switch the eprom into a kl o7 ecu
i'm not sure if it would work with the vaf instead of a maf

mx34u2nv · Post by **mx34u2nv** » February 22nd, 2006, 4:53 pm

i thought klze had kl31 and kl36 ecu's....i might be wrong.....when did u get your ze in? Or is it a DE?

mazdaspeedmx_3 · Post by **mazdaspeedmx_3** » February 22nd, 2006, 4:55 pm

it has kl31 heads and what looks to be flat top pistons.... its from a eunos 800 with the curve neck intake

mx34u2nv · Post by **mx34u2nv** » February 22nd, 2006, 4:56 pm

in st thomas ontario?

JWMX3 · Post by **JWMX3** » February 22nd, 2006, 5:00 pm

I think the KL62 is an OBD II ZE ecu, same as KLK1

does it have 3 or 4 connectors on it ?

mazdaspeedmx_3 · Post by **mazdaspeedmx_3** » February 22nd, 2006, 5:00 pm

mazdaspeedmx_3 · Post by **mazdaspeedmx_3** » February 22nd, 2006, 5:01 pm

it has a spot where there would be the forth plug but its blocked off with no pins
its a 95 engine

mx34u2nv · Post by **mx34u2nv** » February 22nd, 2006, 5:04 pm

red car? i dont know if that ecu will still work with it missing pins.....where did ya get the engine/ecu from?

mazdaspeedmx_3 · Post by **mazdaspeedmx_3** » February 22nd, 2006, 5:06 pm

good old turquois color

mazdaspeedmx_3 · Post by **mazdaspeedmx_3** » February 22nd, 2006, 5:09 pm

sunrise japanese motors in montreal $1500 for everything

mx34u2nv · Post by **mx34u2nv** » February 22nd, 2006, 5:09 pm

no poop. havent seen it yet. Two ze in st .t......poor ol' j body and neon canada are gonna cry........

mazdaspeedmx_3 · Post by **mazdaspeedmx_3** » February 22nd, 2006, 5:10 pm

i hate neons ....its a lebaron with a different body

mazdaspeedmx_3 · Post by **mazdaspeedmx_3** » February 22nd, 2006, 5:11 pm

is there any autocross or solo2 around here

mx34u2nv · Post by **mx34u2nv** » February 22nd, 2006, 5:16 pm

i think so..not to sure where..have heard woodstock in the summer opens a lot.....i only have sched. for 2005 havent gotten '06 yet....

mazdaspeedmx_3 · Post by **mazdaspeedmx_3** » February 22nd, 2006, 6:33 pm

so is it possible to switch that eprom?
its from a 95 eunos 800 curve neck klze kl 62 ecu
theres only 3 plugs for it
i need to know if its the same configeration