A few B6 DOHC Questions

kaioken · Post by **kaioken** » February 20th, 2006, 5:00 pm

What is the Combustion Chamber CC's? & What is the Deck Height? Also what is the size of the injectors?

Im looking for the stock size.

Tunes67 · Post by **Tunes67** » February 20th, 2006, 5:19 pm

CC is 1600 or 1.6L, I dont know the deck height off hand.. but it would be in the online shop manual located just off the main home page of http://www.mx-3.com. Injector volumes are 49-64cc flow /15 sec according to the shop manual. Hope this helps.

Tunes67

kaioken · Post by **kaioken** » February 20th, 2006, 5:35 pm

I guess I should have been a little clearer on that first question. I need the Combustion Chamber CC's of the head not the displacement.

kaioken · Post by **kaioken** » February 20th, 2006, 5:46 pm

I found the Deck height. Its 221.5mm {8.720 in.}

Tunes67 · Post by **Tunes67** » February 20th, 2006, 5:55 pm

Sorry about that. It should be in the shop manual though. If you cant find it in there.. post back and I will get my machinist to look it up for you. Cheers

Tunes67

kaioken · Post by **kaioken** » February 20th, 2006, 6:35 pm

I have not found anything on the Combustion Chamber CC's yet.

Tunes67 · Post by **Tunes67** » February 20th, 2006, 6:37 pm

Alright.. I will have my machinist look it up, in the next day or two I should have the info for you if someone doesnt beat me to it. Cheers

Tunes67