[FS] Rear disc brake swap kit

cjthor · Post by **cjthor** » February 15th, 2006, 4:56 pm

I have:
2 reman calipers never installed
1 set kvr carbon fiber pads
2 rear disc brake spindles powdercoated black
2 rear disc brake backing plates powedercoated Red
Rear section of E brake cable
2 rear hubs
I was going to swap my car over but never did. You will need to supply rotors and might look at the wheel bearings as I know not of the condition. 400 plus shipping to USA residents

SnoSurferr · Post by **SnoSurferr** » February 15th, 2006, 10:06 pm

Thats a little high, Your gonna have to come down a little to sell that..

J0HN_R1 · Post by **J0HN_R1** » February 15th, 2006, 11:36 pm

If you wanna split it up (well, just one part of the 'kit'), I'll take the calipers off y'er hands...

Lemme know how much... And S/H to Canada...?

Thanx, John

cjthor · Post by **cjthor** » February 16th, 2006, 4:25 pm

Well how bout any offers? I will not part this out and probably will not ship to Canada.

PATDIESEL · Post by **PATDIESEL** » February 16th, 2006, 4:33 pm

FYI shipping to Canada is not that hard if you use USPS. I do it all the time now. I origianlly thought it would be a PITA, but after having done it, it is not that bad.

Also I think 400 for all that stuff is not a bad price. It is all powder coated, new calipers, e-brake lines (need to be new honestly, but CJ doesn't say). That is alot of stuff pre-packaged for your conveniance.

Also, if you buy it, replace the bearings. They are a pain in the butt to get to later and only cost about 50 each side. Have a shop press them in if you have never done it. You can mess up the bearing by pressing too hard or pressing the wrong part of the bearing.

J0HN_R1 · Post by **J0HN_R1** » February 16th, 2006, 11:45 pm

Not to mention you're not that far away...

Distance between Portland, Oregon, United States and ______, Canada, as the crow flies : 548 miles (882 km)

I've shipped and bought plenty of parts (car & sportbike) from our neighbors to the south...
Never a problem for me...
Doesnt take any longer, or cost you anything, to ship Intl... Unless you offer free shipping...

cjthor · Post by **cjthor** » February 17th, 2006, 1:21 pm

ebrake cable is not new but should work! Also I agree with Pat 400 IS a good price for what you get. I would just rather not ship to Canada but if someone wants it.....thats another story.. BUMP!

cjthor · Post by **cjthor** » February 21st, 2006, 1:07 am

Ok how bout 400 shipped anywhere in the Continental US!!! I also have a set of Goodrich Stainless steel hoses!

cjthor · Post by **cjthor** » February 24th, 2006, 8:30 pm

cjthor wrote:Ok how bout 400 shipped anywhere in the Continental US!!! I also have a set of Goodrich Stainless steel hoses!

Come on guys! I need to get rid of this stuff!

cjthor · Post by **cjthor** » February 28th, 2006, 4:48 pm

This will be going on ebay in the next few days..no offers?

ninjajim4 · Post by **ninjajim4** » February 28th, 2006, 5:50 pm

cjthor wrote:Ok how bout 400 shipped anywhere in the Continental US!!! I also have a set of Goodrich Stainless steel hoses!

hoses as in SS braided brake lines? do you have all 4? price?

cjthor · Post by **cjthor** » March 1st, 2006, 1:58 am

Fronts are on my car. The rears go with the kit!!

cjthor · Post by **cjthor** » March 3rd, 2006, 1:11 am

This goes on ebay Monday.