i was looking at a lot of picures on these boards and noticed ALOT of MX-3's have the clear front turn signal housings.... im stuck with the ugly orange one's can anyone tell me where to find the clear ones? (I'm talking about the signals under the headlight, if you're unsure)
Thanks!
Clear Corner's, front...
- PATDIESEL
- Senior Member
- Posts: 4476
- Joined: August 13th, 2001, 2:01 am
- antispam: ~SPAM*SUX~
- Location: Atlanta, GA.
E-bay. About 75 USD shipped in most cases.
They come from E-Spec MX-3s originally. Then a company made some aftermarket lenses that you had to take your stock orange ones off and then put the clear ones on. Thank goodness now you can buy the lenses and housings for a really cheap price and several companies sell them.
They come from E-Spec MX-3s originally. Then a company made some aftermarket lenses that you had to take your stock orange ones off and then put the clear ones on. Thank goodness now you can buy the lenses and housings for a really cheap price and several companies sell them.

ZE -strait neck,headers,2.5 exhaust,pheno spacers,lower cross member,GC coils,MS struts,Brembo slotted rotors,filled MS mounts,SS brake/clutch lines, CAI,to rear bat reloc,Hella headlamps,Hella DE fogs 180WHP
- jschrauwen
- Forum Moderator
- Posts: 6052
- Joined: September 27th, 2003, 2:01 am
- Location: Frankford, Ontario, Canada
- Contact:
I did the clear lense thing over a year ago since the complete units were so costly. It was a bit of a bear of a project and would definitely shell out the ebay prices now since they're about half what they were a year ago.
'92 GS-ZE - sold, '95 GS - sold, '02 Protege LX - Daughter, '00 Audi A4 2.8 QTip, Ducati TT2

90 JDM RHD 300ZX TT - 572.1 RWHP | 590.0 RWTQ | 21 PSI | Pump gas

90 JDM RHD 300ZX TT - 572.1 RWHP | 590.0 RWTQ | 21 PSI | Pump gas
-
- Regular Member
- Posts: 141
- Joined: August 22nd, 2004, 2:01 am
- Location: Dallas, TX
- Contact: