[FS] 92 GS klze part out parts or whole
[FS] 92 GS klze part out parts or whole
radiator battery distributor starter alternator, klze heads, block, intake manifold, (complete engine without the throttle body and waterpump ) full 2.5 exhaoust high flo catm shifter, shifter linkage, transmision manual (3rd syncro doesnt work very good grinds) fidenza 9lb flywheel, clutchmaster stage 3 clutch, broospeed headers, no front bumper or hood or lights sold, ecu sold, taillights sold, all the sensors and seats and some interior included.... Stock alloy rims with good rubber 500$CAD 400US OBO for the whole thing parts still intact. 205 KM on the car, 75k on the engine and about 20k on the clutch flywheel headers. car has been siting in my driveway for 4+ months now pickup would be perfered
- babyblueMX3
- Supporting Member
- Posts: 3755
- Joined: February 23rd, 2003, 2:01 am
- Location: Gatineau,Quebec,Canada
- Contact:
500$ for everything ??? if that's the case I'M picking this stuff up (but I doubt it is)
Could you specify ?
where are you located?
Could you specify ?
where are you located?
RIP 400whp ZE-T MX-3
Current car : Golf 01 GTI 1.8T (15 psi)
Current car : Golf 01 GTI 1.8T (15 psi)
thats is the case I got an acura and i need money for school books i didnt drive the car for months and i need it out of my driveway before winter I have nothing to do with it i started taking stuff offf to sell part by part but i dont have too much time with college and work might as well get something out of it. I just need it off my hands asap.
- babyblueMX3
- Supporting Member
- Posts: 3755
- Joined: February 23rd, 2003, 2:01 am
- Location: Gatineau,Quebec,Canada
- Contact:
I read some of your old posts. You're in waterloo right ?
mmm a bit too far..I'll check my things and try to come and pick it up
6 hour drive sucks though
and I need a trailer
mmm a bit too far..I'll check my things and try to come and pick it up
6 hour drive sucks though
and I need a trailer
RIP 400whp ZE-T MX-3
Current car : Golf 01 GTI 1.8T (15 psi)
Current car : Golf 01 GTI 1.8T (15 psi)
- babyblueMX3
- Supporting Member
- Posts: 3755
- Joined: February 23rd, 2003, 2:01 am
- Location: Gatineau,Quebec,Canada
- Contact:
what the car needs in order to work ?
what did you took out ?
would the car work with a k8 in it ?
I'm almost positive I'm picking up the car so I'll let you know soon.
what did you took out ?
would the car work with a k8 in it ?
I'm almost positive I'm picking up the car so I'll let you know soon.
RIP 400whp ZE-T MX-3
Current car : Golf 01 GTI 1.8T (15 psi)
Current car : Golf 01 GTI 1.8T (15 psi)
- babyblueMX3
- Supporting Member
- Posts: 3755
- Joined: February 23rd, 2003, 2:01 am
- Location: Gatineau,Quebec,Canada
- Contact:
- jschrauwen
- Forum Moderator
- Posts: 6052
- Joined: September 27th, 2003, 2:01 am
- Location: Frankford, Ontario, Canada
- Contact:
- babyblueMX3
- Supporting Member
- Posts: 3755
- Joined: February 23rd, 2003, 2:01 am
- Location: Gatineau,Quebec,Canada
- Contact:
well If I'm thinking the car I'm taking everything with it, wasn't that what was agreed ? I must have missed something. In my first post I ask if it was for everything and he said yes.
RIP 400whp ZE-T MX-3
Current car : Golf 01 GTI 1.8T (15 psi)
Current car : Golf 01 GTI 1.8T (15 psi)
- jschrauwen
- Forum Moderator
- Posts: 6052
- Joined: September 27th, 2003, 2:01 am
- Location: Frankford, Ontario, Canada
- Contact:
Ya, I know that Steve. The request was - if you buy the whole package I'll buy the fidenza off you since you probably won't need it anyway. And if you didn't purchase than the offer still stands with blkmx3ze. That's why I said "either way". Sorry if I confused the issue.babyblueMX3 wrote:well If I'm thinking the car I'm taking everything with it, wasn't that what was agreed ? I must have missed something. In my first post I ask if it was for everything and he said yes.
John
'92 GS-ZE - sold, '95 GS - sold, '02 Protege LX - Daughter, '00 Audi A4 2.8 QTip, Ducati TT2

90 JDM RHD 300ZX TT - 572.1 RWHP | 590.0 RWTQ | 21 PSI | Pump gas

90 JDM RHD 300ZX TT - 572.1 RWHP | 590.0 RWTQ | 21 PSI | Pump gas
- babyblueMX3
- Supporting Member
- Posts: 3755
- Joined: February 23rd, 2003, 2:01 am
- Location: Gatineau,Quebec,Canada
- Contact:
- mitmaks
- Senior Member
- Posts: 8704
- Joined: September 10th, 2001, 2:01 am
- antispam: ~SPAM*SUX~
- Location: Spokane, WA
- Contact:
youve emailed me about headers but I didnt get email back recently,. but anyways Ive got first dibs on those way ago when he first emailed me about those.
Magnum s/s lines, strut bars, carbon fiber bezel, indiglow gauge, Sony Xplod, inverted c/f hood, SRD lower tie bar '93 GS SE '95 Cobra SVT #2722 '68 Charger R/T 440
http://www.cardomain.com/id/mitmaks

http://www.cardomain.com/id/mitmaks
