Amd athlon 64 processor 3400 +
1 gig of ram
ATI all-in-wonder 9800 pro.
100, 120 and a 200 gig western digital hard drives.
I usually spend money on the pc when winter comes back so I guess Ill buy some more stuff when I cant drive the car anymore..
93 MX3, BP, Haltech E6X, Bully Six Puck Clutch, Pauter Rods, Wiseco Pistons, Port and Polish, Turbonetics T3/T4 Ball Bearing turbo and a partridge in a pear tree.
liquid cooling is to much of a pain, im running a 1.8 GHz Athlon XP Barton core laptop chip at 2.5 GHz on air
93 MX-3 GS (collecting parts for Eunos Presso conversion), 94 626 Transmission (4.10 gears), KL31 camed KL-ZE, Millenia intake, Millenia TB, SSAutochrome V2 headers, Magnaflow cat, 2 1/4 in pipe, Top Speed Pro 1 muffler, 9lb Fidanza Flywheel, ACT clutch, Corksport SS clutch line, Corksport SS brake lines, Unorthadox UDP, 255 lph fuel pump, HEI mod, ghetto-charger intake, KL36 ECU, SRD transverse crossmember bushings, SRD shifter extention bushing, SRD crossmember, Corksport bronzoil shifter bushings, Brembo Crossdrilled and Slotted rotors, 15 inch Konig Heliums, ZX-2 S/R struts, Eibach lowering springs, OEM front strut bar, Ebay rear strut bar, BFGoodrich G-Force T/A KDWs
Parts needing installed: turbo kit from BB (if i ever get it), 9.0:1 CR Diamond pistons, 4340 forged H beam rods, C/J-Spec spoiler, Nissan red tops in KL rails http://www.cardomain.com/id/blazejeremy
93 MX-3 GS (collecting parts for Eunos Presso conversion), 94 626 Transmission (4.10 gears), KL31 camed KL-ZE, Millenia intake, Millenia TB, SSAutochrome V2 headers, Magnaflow cat, 2 1/4 in pipe, Top Speed Pro 1 muffler, 9lb Fidanza Flywheel, ACT clutch, Corksport SS clutch line, Corksport SS brake lines, Unorthadox UDP, 255 lph fuel pump, HEI mod, ghetto-charger intake, KL36 ECU, SRD transverse crossmember bushings, SRD shifter extention bushing, SRD crossmember, Corksport bronzoil shifter bushings, Brembo Crossdrilled and Slotted rotors, 15 inch Konig Heliums, ZX-2 S/R struts, Eibach lowering springs, OEM front strut bar, Ebay rear strut bar, BFGoodrich G-Force T/A KDWs
Parts needing installed: turbo kit from BB (if i ever get it), 9.0:1 CR Diamond pistons, 4340 forged H beam rods, C/J-Spec spoiler, Nissan red tops in KL rails http://www.cardomain.com/id/blazejeremy
93 MX3, BP, Haltech E6X, Bully Six Puck Clutch, Pauter Rods, Wiseco Pistons, Port and Polish, Turbonetics T3/T4 Ball Bearing turbo and a partridge in a pear tree.
AMD Athlon 64 3500+ Processor 939 Venice
MSI K8N Neo2 Platnum Nforce3 Motherboard
MSI Gefore 6800GT OC
OCZ 1gb DDR400 Ram
120GB 7200RPM Maxtor HD
200GB 7200RPM Western Digital HD
For anyone who plays games you guys should check out the Logitech MX518 mouse. IMO its 10x better than the Lazar. And the 518 is $40 cheaper than the Lazar.
Well Ive got Emachines 500is 500mhz 128MB maxtor , 256RAm memory, DVD-ROM, CD-RW drive, wireless receiver/56k modem. of course that was upgraded since comp is close to 6 yrs old. I need to upgrade mobo and pc as it runs slow with few programs open and dsl connection.
Then we got Toshiba Satellite A75-S209 we bought last winter
Intel Pentium 4 532 supporting hyperthreading technology 15.4 WXGA TruBrite 512MB, 60GB, DVD/CD-RW, 802.11g, windows xp home .
Magnum s/s lines, strut bars, carbon fiber bezel, indiglow gauge, Sony Xplod, inverted c/f hood, SRD lower tie bar '93 GS SE '95 Cobra SVT #2722 '68 Charger R/T 440 http://www.cardomain.com/id/mitmaks