klze IM and TB's

V6 Technical/Performance Discussions
Post Reply
User avatar
NoRtSeVEn
Regular Member
Posts: 30
Joined: June 22nd, 2005, 6:39 am
Location: Auckland, New Zealand

klze IM and TB's

Post by NoRtSeVEn »

just curious as nobody has seemed to ask this before that i can find, if you used the curved IM from the eunos 800 would the TB from the straight neck IM still fit it or are they different bolt patterns?
basically want to know if both TB's on both the curved and straight neck ar KL31
User avatar
V8KOMX3
Supporting Member
Posts: 911
Joined: August 8th, 2004, 2:01 am
Location: Wyoming

Post by V8KOMX3 »

do a little more searching but this has been discussed many times. I don't remember what the specifics are on the differences but it's out there in the forum
Teal 1993 MX3GSZE
User avatar
NoRtSeVEn
Regular Member
Posts: 30
Joined: June 22nd, 2005, 6:39 am
Location: Auckland, New Zealand

Post by NoRtSeVEn »

i sesrched through a lot and didnt find any that said yes there isnt a diff or isnt, i got that the intake was the same bore on the 2, and people who swapped their intake for a curved neck never mentioned if they swopped their TB at the same time
User avatar
V8KOMX3
Supporting Member
Posts: 911
Joined: August 8th, 2004, 2:01 am
Location: Wyoming

Post by V8KOMX3 »

I will look but I know I saw it somewhere.
Teal 1993 MX3GSZE
User avatar
babyblueMX3
Supporting Member
Posts: 3755
Joined: February 23rd, 2003, 2:01 am
Location: Gatineau,Quebec,Canada
Contact:

Post by babyblueMX3 »

hint hint...look in the faq :)
They are not the same. I beleive their bolt pattern are the same but the iac is place differently
RIP 400whp ZE-T MX-3
Current car : Golf 01 GTI 1.8T (15 psi)
User avatar
NoRtSeVEn
Regular Member
Posts: 30
Joined: June 22nd, 2005, 6:39 am
Location: Auckland, New Zealand

Post by NoRtSeVEn »

thanks, that was easy to find, i did the search and had plenty of topics :)
User avatar
jschrauwen
Forum Moderator
Posts: 6052
Joined: September 27th, 2003, 2:01 am
Location: Frankford, Ontario, Canada
Contact:

Post by jschrauwen »

NoRtSeVEn wrote:thanks, that was easy to find, i did the search and had plenty of topics :)
I asked similar question months ago and there should be lots there including one that is 3 pages long.
'92 GS-ZE - sold, '95 GS - sold, '02 Protege LX - Daughter, '00 Audi A4 2.8 QTip, Ducati TT2
Image
90 JDM RHD 300ZX TT - 572.1 RWHP | 590.0 RWTQ | 21 PSI | Pump gas
OptiX
Regular Member
Posts: 81
Joined: April 22nd, 2005, 9:45 am
Location: Hamilton Ontario

Post by OptiX »

the tb's are not the same, different positions for the idle air control sensor/valve.
OptiX
Regular Member
Posts: 81
Joined: April 22nd, 2005, 9:45 am
Location: Hamilton Ontario

Post by OptiX »

babyblueMX3 wrote:hint hint...look in the faq :)
They are not the same. I beleive their bolt pattern are the same but the iac is place differently
bah, was beaten to it.
User avatar
V8KOMX3
Supporting Member
Posts: 911
Joined: August 8th, 2004, 2:01 am
Location: Wyoming

Post by V8KOMX3 »

thaks for the hint babyblue I new it was somewhere close man do I feel dumb now
Teal 1993 MX3GSZE
Post Reply

Return to “V6 Technical/Performance”