Parts 4 sale

[maldo]

I have a bunch of parts for sale some for the MX-3 and some can be used if doing a 4cyl build up or swapping to the B6T.<P>From a '92 MX-3 1.6L SOHC<BR>-short block motor<BR>-injectors (set of 4)<BR>-intake manifold<BR>-exhaust manifold<BR>-fuel rail<BR>-Air filter and cold air box<P>From a '89 323 GTX<BR>-MAF sensor<BR>-Clutch (stock)<BR>-Flywheel<BR>-distributor<BR>-Air box w/used filter<P>From a '91 Protege LX<BR>-Injectors (230cc, set of 4)<P>Many of these parts could be good upgrades for 4cyl owners or to build a race motor. The Pro LX injectors are a decent upgrade for the 4 cyl motors and can be used when doing a B6T swap.<P>I will accept reasonable offers on any of the parts listed. Everything is in good working condition. Buyer pays shipping.<p>[ January 15, 2002: Message edited by: maldo ]

[hartattack]

hey, you are selling the motor? 1.6l 4 cly., what comes with the short block and how much you want for it? and how many miles are on it?<BR>thanks

[Roger3]

Are the intake and exhaust manifold the stock ones or aftermarket??<BR>And what's the price for both of them??

[maldo]

The motor has 130,000km on it. It is the 1.6L SOHC model that was found in the '92-'93 RS. I am willing to sell just the short block (motor, not including manifolds or the like), or I can sell it with the following: intake and exhaust manifold, fuel rail, and injectors. Make me an offer on which ever option you want to go with. Buyer pays the shipping and it will need to go by truck from Saskatoon, SK.<P>The intake and exhaust manifolds are the stock ones. Make me an offer for these and they could be yours.

[Shoalinfist]

Will the protege injectors fit a 94 4cyl DOHC? What size or the DOHC injectors? What is your asking price?

[maldo]

The injectors will fit but you will need to reuse your manifold seals. The injectors are 230cc for the Protege LX ones. Not too sure on the DOHC MX-3 ones, I think they are around 180-200cc. I would like $70 plus shipping, but you could make an offer.